Golden Lighting Heartwood 8063-M1L BUS Käyttöohje
Golden Lighting
Helpotus
Heartwood 8063-M1L BUS
Lue alta 📖 käyttöohje suomeksi merkille Golden Lighting Heartwood 8063-M1L BUS (9 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 7 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/9
Canopy 1ea Hex nut 2ea Wire
connectors 2ea
Mounting
bracket 1ea Mounting screws 2ea Socket rings 1ea
Deco Nut 2ea Fixture mounting
screws 2ea Socket washer 1ea
12" Rod 2ea 6" Rod 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad nish)
Comments
PARTS & ASSEMBLY SHEET
This xture assembled PO:__________ Date: ________
Fixture Name: Heartwood 8063-M1L BUS
Notice: Please review the parts listing and check for all parts before assembling the xture. If any parts
are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be lled out by retailer
8063-M1L BUS
Read and review installation instruction sheet, but
do not install before assembling the xture.
F A IIXTURE SSEMBLY NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. By measuring determine correct number of rods
needed for proper hanging height. There are 2 optional
12" rods included.
2. To shorten the xture trim the wires to the desired
length plus at least 8~10 inches.
2b. Slide the 6" rod plus the excess 12" rods o the wire.
2c. Thread the 6" rod back onto the wire then thread the
wire through the swivel conection into the canopy.
3. To lengthen the xture pull all the wire out of the
canopy.
3b. Slide the 6" rod o the wire.
3c. Thread the additional rods with the 6" rod last back
onto the wire then thread the wire through the swivel
conection into the canopy.
Fig 1
V
These two Rods may
be removed
or
additional Rods may
be added.
ROD-12 BUS
Fig 2
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
Fixture Name: Heartwood 8063-M1L BUS
4. Pull the xture’s wire through the Rods until taut.
5. Thread Rod Q into Frame R until tight. （ ） （ ）
6. Thread Rod P into Rod Q) until tight. repeat for （ ） （
any additional rods.
7. Thread 6" Rod W into Rod P until tight. （ ） （ ）
8. Loosen the Set screw ( X ) just until the rod will t in
the swivel coupler. Thread the 6" Rod W into the （ ）
canopy ( N ) and tighten the Set screw( X )
* You may now install the xture.
9. Place the glass shade (S) over the threaded socket
(V) and place the Socket Washer (T) onto the threaded
socket (V) and secure both by threading the Socket ring
(U) until tight.
10. Install the light bulb in accordance with the xture’s
specications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!) V
W
X
Fig. 1
Fig. 2
For Customer Service, contact the place of purchase to arrange for replacement parts.
HANGING THE FIXTURE as Semi ush (Fig. 1)
1. Carefully remove the new xture from the carton and
the yellow bag that holds all your parts. Check that all
parts are included as shown in the illustration and parts
list.
2. Shut o power at the circuit breaker and remove the old
xture from ceiling, including the old mounting strap.
3. The Mounting bracket ( C ) contains several pairs of
threaded holes, nd the pair of holes that match the hole
spacing in your xture Back Plate (N) and thread the two
Mounting Screws (B) half way into the Mounting Strap (C)
facing down, these will have their threaded ends protrude
through the two holes in the xture canopy(N).
4. Place the Mounting Strap ( C ) over the junction box
5. Attach the Mounting Strap (C) to the Junction Box using
the two mounting screws (E). Tighten the screws (E)
securely with screw driver.
CONNECTING THE WIRES (Fig 2)
6. Attach the power supply wires to the xture lead wires
by connecting BLACK to BLACK (or SMOOTH) and
WHITE to WHITE (or RIBBED).
7. Attach the GROUND wire(GREEN or COPPER) from
the Junction Box and the xture Ground wire to the green
Ground Screw (F) on the Mounting Bracket (C) or
connect both wires together using the correct size of wire
connectors. -
NOTE:Twist the wires together in the same direction you
twist the wire connector onto the wires.
8. Tuck these wire connections neatly into the Junction
Box.
FINISHING THE INSALLATION (Fig.3)
9. Place the xture’s canopy over the Mounting Bracket
(C) and over the Mounting Screws (B), adjust the xture
canopy (N) until the Mounting Screws (B) protrude out
from the canopy (N) and secure the xture against the
ceiling by threading the decorative nuts(O) until tight.
10. Install the light bulbs and glass shade as per the
xture assembly sheet.
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE
FIXTURE.
Fig. 3
For Mini Pendant Light Fixture
INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Heartwood 8063-M1L BUS
N
Tuotetiedot
| Merkki: | Golden Lighting |
| Kategoria: | Helpotus |
| Malli: | Heartwood 8063-M1L BUS |
Tarvitsetko apua?
Jos tarvitset apua merkille Golden Lighting Heartwood 8063-M1L BUS esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Helpotus Golden Lighting Käyttöohjeet
16 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
Helpotus Käyttöohjeet
- Helpotus Stamos
- Helpotus ORNO
- Helpotus Ledlenser
- Helpotus Bosch
- Helpotus AFX
- Helpotus DeWalt
- Helpotus Hama
- Helpotus Neewer
- Helpotus Hazet
- Helpotus Philips
- Helpotus Schwaiger
- Helpotus Godox
- Helpotus IKEA
- Helpotus TP Link
- Helpotus Razer
- Helpotus Kogan
- Helpotus Behringer
- Helpotus GoGEN
- Helpotus Nitecore
- Helpotus Kichler
- Helpotus Trust
- Helpotus Integral LED
- Helpotus Lutec
- Helpotus ET2
- Helpotus Quoizel
- Helpotus Crystorama
- Helpotus Brennenstuhl
- Helpotus Varaluz
- Helpotus FIAP
- Helpotus Aputure
- Helpotus Media-tech
- Helpotus NEO Tools
- Helpotus Gemini
- Helpotus Westinghouse
- Helpotus Canarm
- Helpotus Klein Tools
- Helpotus Schneider
- Helpotus Dainolite
- Helpotus Tesy
- Helpotus Martin
- Helpotus EMOS
- Helpotus Sharper Image
- Helpotus Manfrotto
- Helpotus Fluval
- Helpotus Ryobi
- Helpotus Nanlite
- Helpotus BeamZ
- Helpotus Steinel
- Helpotus Maxim
- Helpotus Nordlux
- Helpotus Brandson
- Helpotus Aplic
- Helpotus CSL
- Helpotus Bearware
- Helpotus Moen
- Helpotus NUVO
- Helpotus Maginon
- Helpotus Sonneman
- Helpotus Milwaukee
- Helpotus Generac
- Helpotus OttLite
- Helpotus Kern
- Helpotus Ansmann
- Helpotus Showtec
- Helpotus Busch + Müller
- Helpotus Valerie Objects
- Helpotus V-Tac
- Helpotus Wireless Solution
- Helpotus Infinity
- Helpotus Nedis
- Helpotus Elation
- Helpotus Chauvet
- Helpotus Karma
- Helpotus TFA
- Helpotus Weeylite
- Helpotus Lumie
- Helpotus WAC Lighting
- Helpotus ESYLUX
- Helpotus Livarno Lux
- Helpotus City Theatrical
- Helpotus Omnitronic
- Helpotus Eurolite
- Helpotus Casalux
- Helpotus Innoliving
- Helpotus Aqara
- Helpotus Beghelli
- Helpotus Middle Atlantic
- Helpotus Rosco
- Helpotus DeSisti
- Helpotus American DJ
- Helpotus Astera
- Helpotus EXO
- Helpotus Novy
- Helpotus Profoto
- Helpotus Claypaky
- Helpotus GRE
- Helpotus Ikan
- Helpotus Ring
- Helpotus Perel
- Helpotus Blackburn
- Helpotus Sigma
- Helpotus Rayzr 7
- Helpotus Excello
- Helpotus Vimar
- Helpotus Genaray
- Helpotus Chrome-Q
- Helpotus Altman
- Helpotus Setti+
- Helpotus Kanlux
- Helpotus ARRI
- Helpotus Yamazen
- Helpotus Osram
- Helpotus Elan
- Helpotus Light4Me
- Helpotus GlobalTronics
- Helpotus Lume Cube
- Helpotus Digipower
- Helpotus Fiilex
- Helpotus Bresser
- Helpotus Currey & Company
- Helpotus Kino Flo
- Helpotus Cateye
- Helpotus GVM
- Helpotus Maxxmee
- Helpotus Wiesenfield
- Helpotus Sun Joe
- Helpotus Lexon
- Helpotus Rollei
- Helpotus Angler
- Helpotus Marklin
- Helpotus Raya
- Helpotus Dracast
- Helpotus ColorKey
- Helpotus Luxli
- Helpotus LUPO
- Helpotus Livex Lighting
- Helpotus Eglo
- Helpotus Hinkley Lighting
- Helpotus Underwater Kinetics
- Helpotus Ranex
- Helpotus COLBOR
- Helpotus Fuzzix
- Helpotus DMT
- Helpotus Sea&Sea
- Helpotus Lucide
- Helpotus Peerless-AV
- Helpotus LumenRadio
- Helpotus Paulmann
- Helpotus HQ Power
- Helpotus Heitronic
- Helpotus Govee
- Helpotus Melinera
- Helpotus Sagitter
- Helpotus Yongnuo
- Helpotus Qazqa
- Helpotus Audibax
- Helpotus Mazda
- Helpotus Triton Blue
- Helpotus Singercon
- Helpotus Hudson Valley
- Helpotus Forte Lighting
- Helpotus ETC
- Helpotus Portman
- Helpotus Litepanels
- Helpotus Perfect Christmans
- Helpotus XQ-Lite
- Helpotus Obsidian
- Helpotus Blizzard
- Helpotus Amaran
- Helpotus Enttec
- Helpotus Fotodiox
- Helpotus Halo
- Helpotus Light & Motion
- Helpotus AD Trend
- Helpotus Craftmade
- Helpotus Intellytech
- Helpotus Trio Lighting
- Helpotus ADB
- Helpotus DCW
- Helpotus Kinotehnik
- Helpotus GLP
- Helpotus SLV
- Helpotus Rotolight
- Helpotus Quasar Science
- Helpotus Kuzco
- Helpotus Lowel
- Helpotus Schonbek
Viimeisimmät Helpotus Käyttöohjeet
9 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
7 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025