Helix Match UP 7BMW Käyttöohje

Helix Ei luokiteltu Match UP 7BMW

Lue alta 📖 käyttöohje suomeksi merkille Helix Match UP 7BMW (17 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/17
UP 7BMW
U P G R A D E
7-Kanal Plug & Play Upgrade-Verstärker mit integrier-
tem 8-Kanal 64 Bit DSP für BMW HiFi-Soundsysteme
7-channel Plug & Play upgrade amplier with integrat-
ed 8-channel 64 Bit DSP for BMW HiFi sound systems
deutsch / english
15
Dear Customer,
Congratulations on your purchase of this innovative
and high-qual ity MATCH product.
Thanks to more than 30 years of experience in
research and development of audio products this
amplier sets new standards in the evolving plug
& play market.
We wish you many hours of enjoyment with your
new MATCH UP 7BMW.
Yours,
AUDIOTEC FISCHER
General installation instructions for MATCH
components
To prevent damage to the unit and possible injury,
read this manual carefully and follow all installation
instructions. This product has been checked for
proper function prior to shipping and is guaranteed
against manufacturing defects.
Before starting your installation, disconnect the
battery’s negative terminal to prevent damage
totheunit,reand/orriskofinjury.
Install your UP 7BMW amplier only at the original
mounting place of the original amplier by using the
included mounting plate.
For a proper performance and to ensure full war-
ranty coverage, we strongly recommend to get this
product installed by an authorized MATCH dealer.
General instruction for connecting the UP 7BMW
amplier
The UP 7BMW amplier may only be installed in
motor vehicles which have a 12 Volts negative ter-
minal connected to the chassis ground. Any other
system could cause damage to the amplier and
the electrical system of the vehicle.
The positive cable from the battery for the entire
sound system should be provided with a main fuse
at a distance of max. 30 cm from the battery. The
value of the fuse is calculated from the maximum
total current draw of the car audio system.
Use only the included MATCH cable for con-
nection of the UP 7BMW. The use of other
cables can result in damage of the ampli-
er, the headunit / carradio orthe connected
loudspeakers! The fuses of the amplier may
only be replaced by identically rated fuses
(2x25A)toavoiddamageoftheamplier.
Prior to installation, plan the wire routing to avoid
any possible damage to the wire harness. All
cabling should be protected against possible
crushing or pinching hazards. Also avoid routing
cables close to potential noise sources such as
electric motors, high power accessories and other
vehicle harnesses.
Congratulations!
General instructions
16
Connectors and control units
1 Auto Remote
This switch allows to activate / deactivate the
automatic turn-on feature of the amplier
.
2 System Connector 2
Connector for the UP 7BMW cable harness.
Only use the original included connection
cable to connect the amplier to the factory
cable harness.
3 Clipping LED
This LED lights up red if one of the analog
inputs is overdriven.
4 System Connector 1
Connector for the UP 7BMW cable harness.
Only use the original included connection
cable to connect the amplier to the factory
cable harness.
5 Fuse LED
This LED will light up if the fuses inside the
amplier are blown.
6 +12 V
Optional connector for the +12 V power ca-
ble to the positive terminal of the battery.
7 GND
Optional connector for the ground cable
(negative terminal of the battery or metal
body of the vehicle).
8 REM
Optional connector for the remote cable.
1 2 3 4 5 6 7 8
9 USB Input
Connects the UP 7BMW to your PC.
10 Control pushbutton
Use this button to either switch between the
setups or initiate a reset of the device.
11 Status LED
This LED indicates the operating mode of
the amplier and the setup that has been
chosen.
12 Control Input
Multifunction interface for e.g. an optional
remote control or other MATCH UP 7BMW
accessory.
13 Optical Input
Optical input for digital stereo signals (SPDIF
format).
14 Gain
Control for adjusting the input sensitivity.
15 Remote Out
The remote output has to be used to turn on /
off external ampliers that are connected to
the .Line Out
16 Line Out
Mono line output for connecting external am-
pliers. Make sure that the remote output is
used to turn on these devices.
10 119 16151312 14

Tuotetiedot

Merkki: Helix
Kategoria: Ei luokiteltu
Malli: Match UP 7BMW

Tarvitsetko apua?

Jos tarvitset apua merkille Helix Match UP 7BMW esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Helix Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet