Hikmicro Pocket1 Käyttöohje

Hikmicro Mittauslaitteet Pocket1

Lue alta 📖 käyttöohje suomeksi merkille Hikmicro Pocket1 (49 sivua) kategoriassa Mittauslaitteet. Tämä opas oli hyödyllinen 13 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF

Sivu 1/49

Handheld Thermography Camera

HIKMICRO Pocket Series

User Manual

Handheld Thermography Camera User Manual

Legal Informaon

About this Manual

The Manual includes instrucons for using and managing the Product.

Pictures, charts, images and all other informaon hereinafter are for

descripon and explanaon only. The informaon contained in the

Manual is subject to change, without noce, due to rmware updates or

other reasons. Please nd the latest version of this Manual at the

HIKMICRO website ( hp://www.hikmicrotech.com).

Please use this Manual with the guidance and assistance of professionals

trained in supporng the Product.

Trademarks

and other HIKMICRO's trademarks and logos are

the properes of HIKMICRO in various jurisdicons.

Other trademarks and logos menoned are the properties of their

respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS

MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL

FAULTS AND ERRORS". HIKMICRO MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL

HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,

INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR

LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING

Handheld Thermography Camera User Manual

NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION

WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR

INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR

OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL

APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING

THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU

ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES

NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR

DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE

THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL

WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR

EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF

HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATTER PREVAILS.

Handheld Thermography Camera User Manual

iii

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modication not expressly

approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protecon against

harmful interference in a residenal installaon. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instrucons, may cause harmful

interference to radio communicaons. However, there is no guarantee

that interference will not occur in a parcular installaon. If this

equipment does cause harmful interference to radio or television

recepon, which can be determined by turning the equipment o and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

This equipment should be installed and operated with a minimum

distance 20cm between the radiator and your body.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to

the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operaon.

Handheld Thermography Camera User Manual

Note: Due to the device size limit, the above statement may not be

disclaimed on the device.

This equipment complies with FCC radiaon exposure limits set forth for

an uncontrolled environment.

EU Conformity Statement

This product and - if applicable - the supplied accessories too

are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the

Direcve 2014/30/EU (EMCD), Direcve 2014/35/EU (LVD),

Direcve 2011/65/EU (RoHS).

Restricons in the 5 GHz band:

According to Arcle 10 (10) of Direcve 2014/53/EU, when

operang in the 5150 to 5350 MHz frequency range, this

device is restricted to indoor use in: Austria (AT), Belgium (BE),

Bulgaria (BG), Croatia (HR), Cyprus (CY), the Czech Republic

(CZ), Denmark (DK), Estonia (EE), Finland (FI), France (FR),

Germany (DE), Greece (EL), Hungary (HU), Iceland (IS), Ireland

(IE), Italy (IT), Latvia (LV), Liechtenstein (LI), Lithuania (LT),

Luxembourg (LU), Malta (MT), Netherlands (NL), Northern

Ireland (UK(NI)), Norway (NO), Poland (PL), Portugal (PT),

Romania (RO), Slovakia (SK), Slovenia (SI), Spain (ES), Sweden

(SE), Switzerland (CH), and Turkey (TR).

The frequency bands and the nominal limits of transmied

power (radiated and/or conducted) applicable to this radio

device are the following:

2.4 G Wi-Fi (2.4 GHz to 2.4835 GHz)

20 dBm

Bluetooth (2.4 GHz to 2.4835 GHz)

20 dBm

5 G Wi-Fi (5.15 to 5.25 GHz)

23 dBm

5 G Wi-Fi (5.25 to 5.35 GHz)

23 dBm

Handheld Thermography Camera User Manual

5 G Wi-Fi (5.47 to 5.725 GHz)

23 dBm

5 G Wi-Fi (5.725 to 5.85 GHz)

14 dBm

Direcve 2012/19/EU (WEEE Direcve): Products marked with

this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return this

product to your local supplier upon the purchase of equivalent

new equipment, or dispose of it at designated collecon

points. For more informaon see: www.recyclethis.info

Direcve 2006/66/EC and its amendment 2013/56/EU

(Baery Direcve): This product contains a baery that

cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specic

baery informaon. The baery is marked with this symbol,

which may include leering to indicate cadmium (Cd), lead

(Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collecon point. For more

informaon see:www.recyclethis.info

Industry Canada ICES-003 Compliance

This device complies with Industry Canada licence-exempt RSS

standard(s). Operaon is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that

may cause undesired operaon of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radioexempts de licence. L'exploitation est autorisée aux

deux condions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est suscepble d'en compromere le

fonconnement.

Handheld Thermography Camera User Manual

This equipment complies with IC RSS-102 radiaon exposure limits set

forth for an uncontrolled environment.

ce matériel est conforme aux limites de dose d'exposion aux

rayonnements, CNR-102 énoncée dans un autre environnement.

(i) The device for operaon in the band 5150-5250 MHz is only for indoor

use to reduce the potenal for harmful interference to co-channel mobile

satellite systems;

(ii) The maximum antenna gain permied for devices in the bands

5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit;

and

(iii) The maximum antenna gain permied for devices in the band

5725-5825 MHz shall comply with the e.i.r.p. limits specied for

point- -point and non point- -point operaon as appropriate. to to

(i)Les disposifs fonconnant dans la bande 5150-5250 MHz sont

réservés uniquement pour une ulisaon à l'intérieur an de réduire les

risques de brouillage préjudiciable aux systèmes de satellites mobiles

ulisant les mêmes canaux.

(ii) Le gain d'antenne maximal autorisé pour les appareils dans les bandes

5250-5350 MHz et 5470-5725 MHz doivent respecter le pire limiter; et

(iii) Le gain d'antenne maximal autorisé pour les appareils dans la bande

5725-5825 MHz doivent respecter le pire limites spéciées pour le

point-à-point et l'exploitaon non point à point, le cas échéant.

Users should also be advised that high-power radars are allocated as

primary users (i.e. priority users) of the bands 5250-5350 MHz and

5650-5850 MHz and that these radars could cause interference and/or

damage to LE-LAN devices.

Les ulisateurs de radars de haute puissance sont désignés ulisateurs

principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz

Handheld Thermography Camera User Manual

vii

et 5650-5850 MHz et que ces radars pourraient causer du brouillage

et/ou des dommages aux disposifs LAN- EL.

B급 기기: 이 기기는 가정용(B급) 전자파적합기기로써 주로 가정에서

사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.

Handheld Thermography Camera User Manual

viii

Symbol Convenons

The symbols that may be found in this document are dened as follows.

Symbol

Descripon

Danger

Indicates a hazardous situaon which, if not

avoided, will or could result in death or serious

injury.

Cauon

Indicates a potenally hazardous situation which, if

not avoided, could result in equipment damage,

data loss, performance degradaon, or unexpected

results.

Note

Provides addional informaon to emphasize or

supplement important points of the main text.

Handheld Thermography Camera User Manual

Safety Instrucon

These instrucons are intended to ensure that user can use the product

correctly to avoid danger or property loss.

Laws and Regulaons

●

Use of the product must be in strict compliance with the local electrical

safety regulaons.

Transportaon

●

Keep the device in original or similar packaging while transporng it.

●

Keep all wrappers aer unpacking them for future use. In case of any

failure occurred, you need to return the device to the factory with the

original wrapper. Transportaon without the original wrapper may

result in damage on the device and the company shall not take any

responsibilies.

●

DO NOT drop the product or subject it to physical shock. Keep the

device away from magnec interference.

Power Supply

●

Input voltage should meet the Limited Power Source (3.85 VDC, 570 mA)

according to the IEC62368 standard. Please refer to technical

specicaons for detailed informaon.

●

Make sure the plug is properly connected to the power socket.

●

DO NOT connect multiple devices to one power adapter, to avoid

over-heang or re hazards caused by overload.

●

Use the power adapter provided by a qualied manufacturer. Refer to

the product specicaon for detailed power requirements.

Baery

●

Improper use or replacement of the baery may result in explosion

hazard. Replace with the same or equivalent type only. Dispose of used

baeries in conformance with the instrucons provided by the baery

Handheld Thermography Camera User Manual

manufacturer.

●

The built-in baery cannot be dismantled. Please contact the

manufacture for repair if necessary.

●

For long-term storage of the baery, make sure it is fully charged every

half year to ensure the baery quality. Otherwise, damage may occur.

●

Use the baery provided by a qualied manufacturer. Refer to the

product specicaon for detailed baery requirements.

●

DO NOT charge other baery types with the supplied charger. Conrm

there is no ammable material within 2 m of the charger during

charging.

●

DO NOT place the baery near heang or re source. Avoid direct

sunlight.

●

DO NOT swallow the battery to avoid chemical burns.

●

DO NOT place the baery in the reach of children.

●

When the device is powered o and the RTC battery is full, the me

sengs can be kept for 6 months.

●

In the rst use, charge the device for more than 2.5 hours in the

power-o status.

●

The lithium baery voltage is 3.85 V, and the battery capacity is 00 21

mAh.

●

The baery is cerfied by UL2054.

Maintenance

●

If the product does not work properly, please contact your dealer or the

nearest service center. We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.

●

A few device components (e.g., electrolyc capacitor) require regular

replacement. The average lifespan varies, so periodic checking is

recommended. Contact your dealer for details.

●

Wipe the device gently with a clean cloth and a small quantity of

ethanol, if necessary.

●

If the equipment is used in a manner not specified by the manufacturer,

the protecon provided by the device may be impaired.

Handheld Thermography Camera Pocket Series User Manual

Chapter 6 Connect Bluetooth

You can record and hear the sound contained in the videos via bluetooth

headsets aer pairing the device with bluetooth headsets successfully.

Steps

1. Select from the main menu.

2. Go to . Local Seings → Connect Bluetooth→

3. Tap to enable the bluetooth.

Note

You can also press to quit pairing.

The device will search the nearby enabled bluetooth headsets and pair

them automacally.

Result

Aer pairing you can record and hear the sound via the headsets while

recording and playing the video or image.

Handheld Thermography Camera Pocket Series User Manual

Chapter 7 Set LED Light

Tap the ashlight buon on the swipe-down menu to enable the LED

light.

Handheld Thermography Camera Pocket Series User Manual

Chapter 8 Cast Screen

You can connect the device to your PC via a type-C cable, and cast the

real-me live view of the device to your PC through the UVC alarm client.

Then you can synchronously view the live view and parameters such as

the maximum temperature, the distance, and the emissivity on your PC.

Before You Start

Download the UVC Alarm Client from HIKMICRO oicial website, and

install the client on your PC. Refer to the user manual of the client for

detailed operaon.

Steps

1. Select from the main menu.

2. Go to Local Sengs → Connect Cast Screen→ .

3. Tap to enable the funcon.

4. Open UVC Alarm Client on your PC.

4. Connect the device to your PC via a type-C cable.

Result

The live view interface and parameters the current image will be of

synchronously displayed on your PC.

Handheld Thermography Camera Pocket Series User Manual

Chapter 9 Set Macro Mode

In the macro mode, you can focus extremely close on a very small object,

and the object appears much larger in the view (and in the nal image)

compared to the standard lens.

Before You Start

 Install the macro lens before using this funcon. Refer to the quick start

guide of the macro lens for detailed operaon.

 The macro lens is not included in the package. Please purchase it

separately. The recommended model is HM-P201- MACRO.

Steps

1. Select from the main menu.

2. Go to Local Sengs → Capture Sengs Macro Mode→ .

3. Tap to enable the funcon.

Note

●

Aer the macro mode is enabled only the emissivity can be modied. ,

Parameters such as distance, image mode, parallax correcon, and

measurement range cannot be modied.

●

Aer this funcon is disabled, the parameters will be restored to the

previous set values and the measurement range will be set to auto

switch.

Handheld Thermography Camera Pocket Series User Manual

Chapter Thermal View APP Connecon 10

The device supports both Wi-Fi connecon and hotspot. Connect the

device to HIKMICRO Viewer, and you can control the device via mobile

client.

10.1 Connect via Wi- Fi

Before You Start

Download and install HIKMICRO Viewer on your phone.

Steps

1. Select from the main menu.

2. Go to . Local Sengs → Connect → WLAN

3. Tap to enable Wi-Fi, and the searched Wi-Fi will be listed .

Figure 9-1 Wi-Fi List

4. Select the - connect . A so keyboard is displayed. Wi Fi to to

5. Enter the password by touching the screen.

Note

DO NOT tap or , or the password may be incorrect. enter space

6. Tap to save.

Handheld Thermography Camera Pocket Series User Manual

7. Launch the App and follow the startup wizard to create, and register an

account.

8 Add the device to online devices. .

Result

You can view the live view, capture snapshots, and record videos via the

App.

10.2 Connect via Hotspot

Before You Start

Download and install HIKMICRO Viewer on your phone.

Steps

1. Select from the main menu.

2. Go to . Local Seings → Connect → Hotspot

2. Tap to enable the hotspot function. The hotspot name is the last

9 digits of the device serial No.

3. Tap . A so keyboard is displayed. Set Hot Spot

Figure 9-2 Set Hotspot

4. Set the password for the hotspot.

Note

●

DO NOT tap or , or the password may be incorrect. enter space

Tuotetiedot

Merkki:	Hikmicro
Kategoria:	Mittauslaitteet
Malli:	Pocket1

Tarvitsetko apua?

Jos tarvitset apua merkille Hikmicro Pocket1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle

Nimesi*

Sähköpostisi*

Kirjoita kysymyksesi tähän

Mittauslaitteet Hikmicro Käyttöohjeet

Hikmicro Falcon FQ25 Käyttöohje

11 Tammikuuta 2025

Hikmicro B1L Käyttöohje

11 Tammikuuta 2025

Hikmicro Pocket1 Käyttöohje

11 Tammikuuta 2025

Hikmicro E1L Käyttöohje

11 Tammikuuta 2025

Hikmicro Eco-V Käyttöohje

1 Tammikuuta 2025

Mittauslaitteet Käyttöohjeet

Viimeisimmät Mittauslaitteet Käyttöohjeet

Uni-T UT220 Käyttöohje

3 Huhtikuuta 2025

Uni-T UT681C Käyttöohje

3 Huhtikuuta 2025

Uni-T UT216C Käyttöohje

3 Huhtikuuta 2025

Uni-T UT611 Käyttöohje

3 Huhtikuuta 2025

Uni-T UT210D Käyttöohje

3 Huhtikuuta 2025

Uni-T UT210C Käyttöohje

3 Huhtikuuta 2025

Uni-T UT210B Käyttöohje

3 Huhtikuuta 2025

Uni-T UT682 Käyttöohje

3 Huhtikuuta 2025

Uni-T UT275 Käyttöohje

3 Huhtikuuta 2025

Uni-T UT08A Käyttöohje

3 Huhtikuuta 2025