Hilti PD-CS Käyttöohje
Hilti
laserosoitin
PD-CS
Lue alta 📖 käyttöohje suomeksi merkille Hilti PD-CS (73 sivua) kategoriassa laserosoitin. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/73
PD-C
PD-CS
English 1
עברית 44
Printed: 29.11.2017 | Doc-Nr: PUB / 5328331 / 000 / 01
PD-C
PD-CS
en Original operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
he הוראותהפעלהמקוריות . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Printed: 29.11.2017 | Doc-Nr: PUB / 5328331 / 000 / 01
English 1
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe,
trouble-free handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the
product.
• Always keep the operating instructions with the product and make sure that the
operating instructions are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that may occur when handling or using the product.
The following signal words are used in combination with a symbol:
DANGER! Draws attention to an imminent hazard that will lead to serious per-
sonal injury or fatality.
WARNING! Draws attention to a potential hazard that could lead to serious
personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead
to minor personal injury or material damage.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use
Instructions for use and other useful information
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of
these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations
and may deviate from the steps described in the text.
Item reference numbers are used in the and refer to theoverview illustration
numbers used in the key in the section.product overview
This symbol is intended to draw special attention to certain points when han-
dling the product.
Printed: 29.11.2017 | Doc-Nr: PUB / 5328331 / 000 / 01
Tuotetiedot
| Merkki: | Hilti |
| Kategoria: | laserosoitin |
| Malli: | PD-CS |
Tarvitsetko apua?
Jos tarvitset apua merkille Hilti PD-CS esitä kysymys alla ja muut käyttäjät vastaavat sinulle
laserosoitin Hilti Käyttöohjeet
16 Helmikuuta 2025
laserosoitin Käyttöohjeet
Viimeisimmät laserosoitin Käyttöohjeet
10 Helmikuuta 2025