Holosun AEMS-CORE-120101 Käyttöohje

Holosun Ei luokiteltu AEMS-CORE-120101

Lue alta 📖 käyttöohje suomeksi merkille Holosun AEMS-CORE-120101 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
12
Fig 1 AEMS CORE Reflex Sight
Model
Important Notices
Features
Thank you for purchasing the Reflex Sight AEMS CORE
from HOLOSUN. The is an advanced enclosed AEMS CORE
micro sight with a 2MOA dot reticle housed in a Aluminum
body. It features a motion sensor and battery power.
Before operation, please read the User Manual carefully.
1. Advanced LED technology: Up to 50,000 hours
2. Parallax free with unlimited eye relief
3. 2MOA Dot
4. Shake Awake sensor
5. 10 Daylight & 2 Night Vision compatible brightness
settings
6. Rechargeable internal battery
7. Window Size: 0.87” x 1.1” (inches)
8. Solid 7075 aluminum Body
9.1.63” Center Dot Height (Lower 1/3 Co-witness)
10. Waterproof: IP67
1. Ensure the firearm is unloaded and cleared by removing all
ammunition and magazines from firearm and verifying an
empty chamber before installation or battery
replacement.DO NOT ATTEMPT TO INSTALL THIS SIGHT KIT
ON A LOADED FIREARM.
2. Please keep the packaging should you need to make a
warranty claim.
Objective Lens
A canted objective lens is part of the design of
reflex/reflective optical sights. In order to create a proper
reflection of the reticle/dot the objective lens must be
perpendicular to the LED. Because the LED is mounted off to
one side, the objective lens will be canted in that direction.
Fig2
Battery
Installation onto Firearm
1.The AEMS CORE is compatible
with any firearm with a Picatinny
mounting rail. If your firearm
does not have a Picatinny rail,
contact a qualified gunsmith.
U
U
U
UUs
s
s
sse
e
e
eer M
r M
r M
r Mr Ma
a
a
aan
n
n
nnu
u
u
uua
a
a
aal
l
l
ll
AEMS CORE
your purchase.
2. A high quality battery can power the2MOA dot for up to
50,000 hours at a mid setting.
Caution: Do not use a rechargeable battery.
3.Battery Replacement(Fig3):
a. Removing the battery :
I. Remove the battery tray screws.
ii. Use the included tool as a lever in the top battery tray slot
to remove the battery tray and battery.
b. Battery installation :
I. Insert the battery into the battery tray with the POSITIVE
side facing DOWN.
ii. Insert and press the tray into the battery compartment.
iii. Tighten the battery tray screw.
Caution:
The loss or damage of the seal ring may cause moisture to
enter into the compartment which could damage the
product.
Fig 3
Clamp
screw head Clamp
Fig 4
2. Using the included T10 Torx tool, loosen the cross bolt and
then attach the sight onto the Picatinny rail in an appropriate
position. Apply forward pressure towards the muzzle and
tighten the clamp screw to 20 inch/lbs using non-permanent
thread lock.(Fig4)
Advanced Enclosed
Micro Sight
AEMS CORE 110101 -
AEMS CORE 120101 -
RED Dot
Green Dot
Screw
Battery tray
Seal ring
Battery Slot
Battery
compartment
1. One high quality CR2032 Lithium battery is included with
Fig5
1) The sight has been zeroed at the factory. mechanically
2) The elevation adjust is of the sight ment on the right side
(battery side). The windage adjustment is the left side of on
the housing (button side). Adjustment can be performed
using the supplied tool (see Fig ).6
3) 0.5 MOA Windage & Elevation adjustments per click.
4) 0.5
Each adjustment click has a value of approximately
MOA or 1/2- inch at 100 yards (1/4" at 50y; 1/8" at 25y).
When zeroing at 50 yards, if your impacts are 2 inches low
and 1 inch right, you will need to adjust Elevation 8 clicks UP
(clockwise) and Windage 4 clicks LEFT (counterclockwise).
5) The maximum adjustment range is ±50MOA.
AEMS CORE- 11 01 01
AEMS CORE- 12 01 01
Holosun Technologies Inc.
www.holosun.com
C
C
C
CCu
u
u
uus
s
s
sst
t
t
tto
o
o
oom
m
m
mme
e
e
eer S
r S
r S
r Sr Se
e
e
eer
r
r
rrv
v
v
vvi
i
i
iic
c
c
cce
e
e
ee
We provide a limited lifetime warranty from the date of
purchase on parts and workmanship to the original
purchaser. At our sole discretion, we will repair or replace
products found to be defective under normal use without
charge, excluding any delivery costs, which will be born by
purchaser. We will not be liable for incidental,
consequential, or special damages arising out of or in any
connection with the use or performance of this product. This
warranty is void if the product has been misused, modified,
neglected, or disassembled prior to its return. Please refer to
www.holosun.com for current and complete warranty
information and other conditions.
This device is a precision instrument that deserves
reasonably cautious care. The following tips are provided to
ensure a long product life. The optical lenses are multicoated
optical glass. When cleaning the lenses, blow away any dust
on the surface, wet the lens with lens cleaner or clean water,
then wipe away smudges with lens tissue, soft cotton or a
microfiber cloth. Avoid touching the glass surface with dry
cloth or tissue paper. Do not use organic solvents such as
alcohol or acetone. No special maintenance is needed for the
housing surface. Do not try to dismantle the device as the
internal parts are specially cleaned and sealed and with an
anti-fog treatment. Any such attempt will void the warranty.
Phone: (909) 594-2888
Fax: (909) 598-4888
E-mail: warranty@holosun.com
Zero Setting
Maintenance & care
Limited warranty
Fig 6
Caution: If you feel the knobs can no longer be rotated, you
may have reached the mechanical limit of the adjustment
turret. Do not try to rotate the knobs further if you feel a
bind or you may cause damage.
Sight Operation
34
1.Switch on: Press and release either brightness button
("+"or"-") to turn on the sight, See Fig 5.
2.Power off: Press the"+"and"-" buttons simultaneously to
turn the power and motion sensor off (this will disable Shake
Awake).
3.Operation mode:
Brightness adjustment: There are 12 reticle brightness
setting levels in manual mode. Settings 1 and 2 are NV
compatible and setting 12 is the brightest. Press ”+” or ”-” to
increase or decrease the brightness.
4. Sleep timer setting:
1) Please note that your red dot will automatically enter into
sleep mode after 10 minutes of no movement.
2) The sight will instantaneously wake up and turn on with
any motion detected to the last saved settings.
3) The default sleep timer setting is 10 min, but can be
changed to one of four total settings.
i. Press and hold the “+ button for 10 seconds to enter time
adjustment mode. There are 4 options: 10 min, 1h, 12h or the
sleep mode is disabled.
ii. Press and release either “+” or “- button to set the time.
The LED will blink (1=10 min, 2=1h, 3=12h, or 4=disable sleep
mode).
iii. Press the +” and “-” buttons simultaneously to save the
time setting and power off the sight.
5. Note:
1) Memory function: The sight will remember the last saved
brightness setting when powered on and off.
2) Low battery Warning: If the battery voltage is below
2.2Vdc, the reticle will blink slowly.
Ver:A0
Brightness
Increase Brightness
Decrease
Windage
Adjustment
Elevation
Adjustment
Advanced Enclosed
Micro Sight
For more information about Holosun, our Terms of Use and
Sale, and our Privacy Policy, please visit holosun.com.
If you run out of adjustment range, contact your gunsmith or
Holosun for assistance.

Tuotetiedot

Merkki: Holosun
Kategoria: Ei luokiteltu
Malli: AEMS-CORE-120101

Tarvitsetko apua?

Jos tarvitset apua merkille Holosun AEMS-CORE-120101 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Holosun Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet