IFi Audio ZEN Can Signature HD6XX Käyttöohje

IFi Audio Vastaanotin ZEN Can Signature HD6XX

Lue alta 📖 käyttöohje suomeksi merkille IFi Audio ZEN Can Signature HD6XX (1 sivua) kategoriassa Vastaanotin. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/1
Ver1.1
ifi-audio.com
CAN
6XX
2 4 61 953 7 8
INP UT
Powe rMatc h
3
2
1
0dB
6dB 12dB
18dB
DC 5V
LR
3
BAL ANCED
Technolo gy lic ensed f rom AMR- Audio, UK A ssem bled in C hina
BAL ANCED
Out put
Inp uts
2
SIN GLE
END ED
1
10 11 12 13 14
Des igned
for
CAN
6XX
10. Balanced 4.4mm analogue input
This is a balanced analogue input.
11. Single-ended 3.5mm analogue input
For connecting single -ended 3.5mm input.
12. RCA analogue input
This is an analogue input.
13. Balanced 4.4mm analogue output
This is an analogue output via 4.4mm > XLR or other balanced
interconnects. You could use this for an active speaker.
Tip: As the ZEN CAN 6XX is balanced, this is the recommended output.
Signature
14. DC 5V power
Please conne ct the ZEN CAN 6XX to the enclose d
Signature
power supply, the super-si len t iPower X. The ZEN C AN
Signature 6XX mus t ONLY be powered by 5 volts.
Specifications
Input voltage: DC 5V/2.5A
AC 100 -240V, 50/60Hz (iFi iPower X included)
Max Output:
Balanced: >15.1V/385 mW (@ 600 Ohm)
>11.0V/1890 mW (@ 64 Ohm)
>6.2V/1200 mW (@ 32 Ohm)
S-E: >7.6V/98 mW (@ 600 Ohm)
>7.4V/870 mW (@ 64 Ohm)
>7.2V/1600 mW (@ 32Ohm)
THD & N:
Balanced: <0.006% (@ 360 mW/2.4V 16 Ohm)
S-E: <0.005% (@ 100 mW/1.27V 16 Ohm)
SNR:
Balanced: >121dB A (@ 15.2V )
S-E: >120dB A (@ 7.6V)
Max. Input:
Balanced: 7.4V RMS
RCA: 3.8V RMS
3.5mm: 1.92V RMS
Gain: 0dB, 6dB, 12dB and 18dB
Frequency Response: 10Hz - 200kHz (-3dB)
Power consumption: No Signal ~5W
Max Signal ~12W
Dimensions: 158 x 117 x 35 mm
6.2" x 4.6" x 1.4"
Net weight: 550 g (1.21 Ibs)
Warranty period: 12 months
Specications are subject to change without notice.
9. Settings
This button chooses between:
- Off
- HD 6XX
- XSpace®
HD6X X XSp ace
Thank you for purchasing the CAN Signature 6XX from ZEN
series. The CAN Signature 6XX is a balanced headphone
amplifier optimized for Sennheiser HD 6XX headphones.
1. Power switch
2. Input channel switch
Input 1: R CA
Input 2: Single-ended 3.5mm
Input 3: Balanced 4.4mm
3. PowerMatch selection: 0dB/6dB/12dB/18dB
We recommend to star t from 0d B and then increase the
switchable gain level to attain an enjoyable and comfortable
level of volume from the headphones.
Warning: at the outset do not use excessive gain, otherwise damage to hearing
or connected headphones may ensue. AMR/iFi audio is not responsible for any
damage/injury from misuse.
4. Analogue Volume Control
At normal listening levels, the volume control should be around the 12
o'clock position. Increase the gain level to enjoy a higher listening level.
5. Single-ended 6.3mm output
For connecting single-ended 6.3mm headphones. With single-ended
3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.
6. Balanced 4.4mm analogue output
For connecting balanced 4.4mm headphones.
Tip: As the Sennheiser HD 6XX headphones use balanced design, we recommend
the 4.4mm balanced output.
7. HD 6XX LED
Headphone corrections optimized for Sennheiser HD 6XX headphones.
8. XSpace® Matrix LED
The XSpace® Matrix(on/off ) recreates a holographic sound
field. It is a pure analogue signal processing circuit designed for
listening to headphones as if one was listening to speakers. This
addresses the 'music inside the head' sensation, which makes
for unsettling listening.
Tip: Sonically-hindering DSP is NOT used for HD 6XX nor XSpace® Matrix systems.
They use the highest-quality discrete components and operate purely in the analogue
domain. Hence all the clarity and resolution of the original music is retained.

Tuotetiedot

Merkki: IFi Audio
Kategoria: Vastaanotin
Malli: ZEN Can Signature HD6XX

Tarvitsetko apua?

Jos tarvitset apua merkille IFi Audio ZEN Can Signature HD6XX esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Vastaanotin IFi Audio Käyttöohjeet

Vastaanotin Käyttöohjeet

Viimeisimmät Vastaanotin Käyttöohjeet