Imarflex IFP-450M Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Imarflex IFP-450M (8 sivua) kategoriassa Monitoimikone. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/8
SPECIFICATION
MODEL NO. : IFP-450M
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 0 Watts 45
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions should always be followed, including
the following:
1. Read all instructions thoroughly.
2. Before using the unit, check if the voltage indicated corresponds with the convenience outlet
(230Va.c.).
3. Do not use a two-way socket with another appliance.
4. Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be
replaced with the same type and size or bring the unit to the nearest Imarex Authorized
Service Center.
5. Do not place the unit near a gas stove, an electric burner or in a heated oven.
6. Place the unit on stable surface; keep it away from the edge of counter to avoid accident.
7. Children should be supervised to ensure that they do not play with the appliance.
8. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliances by a person responsible
for their safety.
9. The maximum continuous operating time of the food processor is one minute only. Do not
exceed with the maximum operating time. It may cause damage to the unit.
10. To protect against electric shock, do not immerse the appliance in water or any other liquids.
11. Extreme caution must be exercised when using an appliance containing hot liquid in the
food processor when mixing as it can be ejected out of the appliance due to sudden
steaming.
12. Use of accessories or equipment not supplied by the manufacturer may cause damage or
malfunctioning of your appliance or result in injuries.
13. Use on a hard, at level surface only, to avoid interruption of air ow underneath the
appliance.
14. Blade is sharp, handle it carefully.
15. The maximum continuous operating time of the chopping is three minutes only. Do not
exceed with the maximum operating time. It may cause damage to the unit.
16. Do not exceed into the maximum capacity if food processor is overlled, it may cause
damage to the unit.
17. Do not put the blade assembly on the base without the bowl.
18. Do not use the appliance if the bowl has a crack or damage.
19. This appliance is not intended for outdoor use.
20. Never place the appliance near hot surfaces.
21. In case of malfunctions, please bring the appliance to the nearest Authorized Imarex
Service Center.
22. Avoid water spillage into the socket, connector, cord and alike.
23. Switch o the appliance before removing the bowl into the motor base.
24. Do not use this unit other than its intended use.
25. For household use only; not intended for any business purposes
26. Save this instruction manual for future reference.
27. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and o by the utility.
DESCRIPTION OF PARTS
1. Motor Base
2. Drive Shaft
3. Bowl
4. Blade Adapter
5. Bowl Cover w/ Chute
6. Food
Pusher
7. Disc Holder
8. Slicing Disc
9. Dough Blade
10. Chopper
11. Large Shredding Blade
12. Fine Shredding Blade
13. French Fries Shredder
14. Blender Jug
15. Center Lid
16. Strainer
17. Cone Reamer
18. Blade Assembly
19. Speed Selector
NOTE: Disc holder (7) is for slicing and shredding blade attachment.
HOW TO ASSEMBLE:
FOOD PROCESSOR
IMPORTANT: Your Plastic Jug, Bowls and Blades are subject to wear and tear during normal
use. Always inspect the jar for nicks, chips or cracks. Always inspect blades for broken, bent or
loose blades. Avoid using the jar or blades if damaged.
Contact Authorized Imarex Service Center to obtain evaluation and repair. any
Make sure that the unit is unplugged. Place motor base on clean, dry surface to keep foreign
particles from being pulled up into motor during operation.
1. Fit the Drive Shaft on the Motor Base. (See pic.1)
2. Put the Bowl into the Drive Shaft and turn counter-clockwise to lock. (See pic.2)
3. Insert the Bla hole. de Adapter on the Bowl’s (See pic.3)
4. Select the desired attachment; chopper dough blade whipping disc(see pic.4), (see pic. 5),
(see pic 6) (see pic. , slicing, shredding disc assembly 7).
NOTE: If Slicing and Shredding Disc will be used, do not use the Adapter anymore.
6. Align the Bowl Cover into Bowl Slot then slightl turn it counter-clockwise to lock. y (See pic.8)
NOTE: Make sure that the bowl and cover is properly tted otherwise the unit will not
function Please refer to lock and unlock icon. .

Tuotetiedot

Merkki: Imarflex
Kategoria: Monitoimikone
Malli: IFP-450M

Tarvitsetko apua?

Jos tarvitset apua merkille Imarflex IFP-450M esitä kysymys alla ja muut käyttäjät vastaavat sinulle