Imarflex PR-1000D Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Imarflex PR-1000D (7 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/7
IMPORTANT SAFEGUARDS
This manual contains important safety instruction that should be followed during the
installation and maintenanc of the AVR. Please read this manual thoroughly before e
attempting to install or operate in this AVR .
1. Read all instructions carefully.
2. This equipment is available for 0Va.c. supply voltage and loads. 22
Please verify that this model matches your AC main /load voltage requirements.
3. This equipment is designed for normal use only. The manufacturer neither
recommends nor knowingly sells this product for use in critical life support
application. Connect if possible to main supply socket outlet with an earth
connector. A means of disconnection of the main supply should be within 2 meters
of the AVR.
4. The AVR relies on your building wiring over-current protection, which must be rated
between 30 amperes.
5. This unit is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the AVR.
7. Although your AVR has been designed and manufactured to assure personal
safety, improper use can result in electrical shock of re. To insure safety, please
observe the following rules:
Turn o and unplug your AVR before cleaning. Do not use liquid or aerosol
cleaners. A dry cloth is recommended to remove dust from the surface of your
AVR.
Do not install or operate your AVR near water.
Do not place the AVR on an unstable cart, stand or table.
Do not place the AVR under direct sunlight or close to heat emitting sources.
Do not place the AVR power cord in any area where it may get damaged by
heavy objects.
Do not overload or short circuit the AVR.
Follow all warnings and instructions marked on the AVR.
When connected to any appliance with the built-in motor compressor, the
starting power is generally several times of the appliances listed power rating.
Make sure that the total starting power capacity of all connected appliance does
not exceed the listed maximum output power capacity of the regulator. For color
TV, calculate it twice as its listed capacity.
Make sure that the regulator is of the same output voltage and frequency as the
appliance’s it connected.
Make sure that the voltage of electrical source is within the listed range of input
voltage of the regulator.
8. ATTENTION:
Turn o and unplug the your AVR from the convenience outlet and contact or bring
the AVR to Imarex Authorized Service Center if;
The power cord or plug damaged.
quid has been spilled on the AVR or it emits a strange smell from inside. Li
The fuse blows frequently or the circuit breaker trips frequently.
The AVR does not operate even when user follows the operating instruction.
9. Save this instruction manual for reference.

Tuotetiedot

Merkki: Imarflex
Kategoria: Ei luokiteltu
Malli: PR-1000D

Tarvitsetko apua?

Jos tarvitset apua merkille Imarflex PR-1000D esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Imarflex Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet