Joy-it RB-Heatsink5 Käyttöohje

Joy-it Ei luokiteltu RB-Heatsink5

Lue alta 📖 käyttöohje suomeksi merkille Joy-it RB-Heatsink5 (5 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/5
ACTIVE COOLING UNIT FOR RASPBERRY PI 5
RB-Heatsink5
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - D-47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer
Thank you for choosing our product. In the following, we will show you
what you need to bear in mind during commissioning and use. Should you
encounter any unexpected problems during use, please do not hesitate to
contact us.
First insert the fan unit into the heat sink and mount it using the four screws
provided.
Now completely remove the protective lm from the thermal pads and place
them on your Raspberry Pi.
ATTENTION! There is a protective lm on both the front and back of the heat
conducting pads. Both must be removed before tting.
1. GENERAL INFORMATION
2. ASSEMBLY
Now place the heat sink on your Raspberry Pi.
Now mount it from the underside of your Raspberry Pi using the two
enclosed screws and washers.
Now insert the fan cable into the fan connection of your Raspberry Pi.
The fan is now ready for use. A separate installation and/or conguration is
not required.

Tuotetiedot

Merkki: Joy-it
Kategoria: Ei luokiteltu
Malli: RB-Heatsink5

Tarvitsetko apua?

Jos tarvitset apua merkille Joy-it RB-Heatsink5 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Joy-it Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet