Khind FPC900 Käyttöohje
Khind
Leikkuukone
FPC900
Lue alta 📖 käyttöohje suomeksi merkille Khind FPC900 (12 sivua) kategoriassa Leikkuukone. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/12
Model / 型号 FPC900
Mini Chopper / / 迷你切碎机 Pemotong Mini
Instruction Manual / / 说明指示书 Buku Panduan
Important / / 重要 Mustahak
Please read this manual carefully before operating this product. Keep this manual handy for further reference.
请在使用此产品前,详读此说明书。并将之收藏以作日后参考。
Sila baca buku panduan ini dengan teliti sebelum menggunakan produk ini. Simpanlah
untuk rujukan masa depan.
P/N: 40-50775-00
This manual is also available online.
EN
2
Parts Identication
Specications
1Power Button
5Chopper Glass Cup
6Non-slip Pad
7Power Cord
3Cup Cover
* Pictures are for illustration purpose only.
* Specications are subject to change without prior notice.
2Motor Body
4Chopper Blade
Model
Voltage
Power
Gross Capacity
Rotational Speed
Rated Working Time
Rated Interval Time
Product Dimension (LxWxH)
Net Weight
FPC900
220-240V~ 50-60Hz
220W
0.6 Litres
17000r/min
<1min
>2min
118 x 118 x 236mm
1.3kg
:
:
:
:
:
:
:
:
:
1 7
2
6
5
4
3
EN
3
Caution
1. Read all instructions carefully before using.
2. Keep hands and utensils away from moving blades while processing food to reduce the risk of
severe injury to persons or damage to this appliance. A scraper may be used only when the
appliance is not running.
3. Blades are sharp. Be careful when handling the sharp cutting blades, emptying the Chopper
Glass Cup and during cleaning.
4. Always remove the Cutting Blade rst before removing the food stu inside the Chopper
Glass Cup.
5. Never attempt to deactivate the interlock microswitch.
6. Do not touch surfaces that may be hot.
7. To protect against electrical shock, do not immerse cord, plugs, Motor Body in water or other
liquids.
8. Unplug from mains when the appliance is not in use, before putting on or taking o parts,
and before cleaning. Allow appliance to cool before handing.
9. Do not use this appliance at outdoors. This appliance is intended for household use only. Do
not use the appliance for other than its intended use.
10. Do not let cord hang over edge of table or counter or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner or in a heated oven.
12. Do not use without any load in the Chopper Glass Cup.
13. Never attempt to take food or liquid out from the Chopper Glass Cup when the blade is still
moving.
14. Do not overload the appliance with food at any time or use it for too long period of time.
This appliance is tted with a resettable thermal link to protect the motor from overheating.
Should the motor overheat, the thermal link will disconnect the power supply and will
automatically re-connect the power supply after the motor cools down.
15. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
16. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance.
17. Never leave the appliance unattended when it is switched on.
18. The water temperature should not over 60˚C when cleaning the appliance.
19. Do not switch on the appliance if it appears to be faulty in anyway. Please contact and send
to nearby Khind service center.
Tuotetiedot
| Merkki: | Khind |
| Kategoria: | Leikkuukone |
| Malli: | FPC900 |
Tarvitsetko apua?
Jos tarvitset apua merkille Khind FPC900 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Leikkuukone Khind Käyttöohjeet
16 Lokakuuta 2024
Leikkuukone Käyttöohjeet
- Leikkuukone Kogan
- Leikkuukone RGV
- Leikkuukone Brandson
- Leikkuukone Eldom
- Leikkuukone Weston
- Leikkuukone Wolfcraft
- Leikkuukone Maruyama
- Leikkuukone Ade
Viimeisimmät Leikkuukone Käyttöohjeet
26 Lokakuuta 2024
26 Lokakuuta 2024
26 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
17 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024