Marmitek WPR 400 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Marmitek WPR 400 (26 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/26
WPR 400
Wireless presentation
remote
Easily navigate through your slides
and highlight details on the screen
- air mouse
- magnify function
- built-in battery
- Windows/Mac
user guide
Set content
1 x WPR 400 remote
1 x WPR 400 receiver
1 x sleeve
1 x USB-C power cable
Professional
Safety Instructions
Please read these instructions thoroughly before you use the device and
keep them for future reference.
Only for indoor use.
Do not use the product in a damp environment or near water.
Do not expose the product to extremely high or low temperatures,
strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
The built-in rechargeable battery is not replaceable. Do not remove or
replace the battery. Dispose of unit properly. Do not dispose unit in
trash or fire.
Never open the product: the device may contain parts with deadly
voltage.
Repairs or service should only be performed by qualified personnel.
Improper use, self installed modifications or repairs will void any and all -
warranties.
Marmitek does not accept any product responsibility for incorrect use of
the product or use other than for which the product is intended.
Marmitek does not accept liability for any consequential damage other
than the legal product responsibility.
Setup
Before using the , please charge the device for 1 WPR 400 for the first time
hour with the included USB C charging cable.-
1. Plug one end of the USB cable into charger (or into the USB port of a a
computer).
2. Plug the other end of the cable into the USB port on your -C WPR . 400
Note: The LED indicator will slowly blink red while charging. When the
battery is full, the LED indicator . will turn off
After charging, remove the charging cable and insert either the USB-A or
USB-C side of the receiver into an available USB port of your PC.-
The WPR 400 requires software in order to use the highlight, magnify and
digital pointer functionality on screen Download the. software from
www.marmitek.com/pages/software and install on your windows or
macOS PC. The ‘Marmitek presenter’ software does not gather or save
any information regarding you or the device it is installed on.
Starting the WPR400
To start switch the mode switchusing the device, (1) vto either ideo (VID)
or presentation ( ) PPT mode. While starting, the indicator will blink green
for a time. After the indicator goes off the connection made to the , is
receiver.
Presentation m ode
Presentation mode (PPT) should be enabled when you are presenting a
slideshow. Beside some buttons that will only work during a presentation,
there are also buttons that work outside the presentation.
1. Mode switch: Switch between ‘OFF’, ‘VID’ and ‘PPT’ for the mode you
want to use.
2. Highlight pointer button: /magnify/digital Press and hold the button
to have the highlight, magnify or on screen. After digital point er
releasing the button, the effect will freeze on screen until the button is
pressed again. Double press the button to switch between highlight,
magnif and digital pointerier . This button works during and outside of
your presentation.
3. Previous button: slide Sends you to the previous in your presentation.
4. Next button: Sends you to the next slide in your presentation.
5. Start/stop and black screen button: While in the presentation edit
screen, press once to start the presentation. During the presentation,
press once to turn the screen black. Press again to show the
presentation again. Double press the button to stop presenting.
6. Air mouse and annotation button: The WPR 400 supports air mouse.
Press the button once to start air mouse mode and move the presenter
to move the cursor on screen. In this mode, the previous(3) and next(4)
button changes function to left and right click respectively. Press the
button once again to quit air mouse mode.
In a presentation, you can start annotation mode by double pressing
the button. This will change the cursor in a dot. In annotation mode, to
press and hold the button to make notes on screen ouble press the . D
button in annotation mode to remove all notes. To quit out of annotation
mode, deactivate air mouse mode by single pressing the air mouse
button.*
7. Volume +: Increases the volume of the PC. holding the highlight e Whil
button, this button also enlarges the circle on screen. This button works
during and outside of your presentation.
8. Volume - : Lowers the volume of the PC. holding the highlight e Whil
button, this button also shrinks the circle on screen. This button works
during and outside of your presentation.
*note: not all presentation programs support s annotation mode Check the .
user guide of your software to see if annotation is supported.
Video mode
Video mode (VID) should be enabled when you are playing media on the
screen. Beside some buttons that will only work , there while watching media
are also buttons that work outside the media player.
1. Mode switch: Switch between ‘OFF’, ‘VID’ and ‘PPT’ for the
mode you want to use.
2. Highlight/ pointer button: magnify/digital Press and hold the button
to have the highlight, magnify or digital point er on screen. After
releasing the button, the effect will freeze on screen until the button is
pressed again. Double press the button to switch between highlight,
magnif and digital pointerier . This button works while in a media player
and outside of the program.
3. Previous button: Skips backwards media playlist.through your
4. Next button: Skips forward through your playlist.media
5. Start/stop and mute button: Single press the button to start or stop
your video. Double press the button to mute or unmute the audio of the
PC.

Tuotetiedot

Merkki: Marmitek
Kategoria: Ei luokiteltu
Malli: WPR 400

Tarvitsetko apua?

Jos tarvitset apua merkille Marmitek WPR 400 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Marmitek Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet