Megger MLM50 Käyttöohje
Megger
Etäisyysmittari
MLM50
Lue alta 📖 käyttöohje suomeksi merkille Megger MLM50 (12 sivua) kategoriassa Etäisyysmittari. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/12
MLM50
Laser Distance Meter
USER MANUAL
1. Introduction
The Megger MLM50 Laser Distance Meter is a compact, easy to use meter designed for indoor and outdoor use. It
allows the user to make fast, reliable distance measurements, as well as add and subtract measured values and make
automatic calculations for area and volume.
For your own safety and to get the maximum benefit from your instrument, please ensure that you read and
understand the following safety warnings and instructions before using the instrument.
This user guide describes the operation and functions of the MLM50 Laser Distance Meter.
The meter should only be used for the purpose intended: measuring distance and computing values of area and
volume.
2. Safety Warnings
Safety Warnings and Precautions must be read and understood before the instrument is used. They must be observed
during use.
THE INSTRUMENT MUST BE USED ONLY BY SUITABLY TRAINED AND COMPETENT PERSONS.
Laser Classification:
This product produces a visible laser beam from the front of the instrument.
Laser Class 2 products:
Do not stare into the laser beam or direct it towards other people. Looking into the laser beam may be hazardous and
cause permanent damage to the eyes. Measurement should be made either above or below eye level.
The spirit level contains a mineral oil. Should the glass be broken, ensure any glass and oil is carefully cleaned up using
an absorbent towel and disposed of appropriately.
Ensure you are using the latest edition of the MLM50 manual, available to download from the Megger website: www.
megger.com
Symbols as marked on the instrument
c Conforms to EU directives
Conforms to UKCA directives
Do not discard this product or throw away
3. The Meter Description
Keypad
1 - ON/MEAS button
2 - CLR/OFF button
3 - MEM/Reference button
4 - Function/Unit Button
www.megger.com
2
MLM50 Laser Distance Meter
LCD Display
1 – Laser active
2 – Reference level (front)
3 – Reference level (rear)
4 – Battery Status
5 – Intermediate line 1
6 – Intermediate line 2
7 – Summary line
4. Operation and Settings
On/Off/Auto Measurement
Switches on the instrument and measurement laser.
Press and hold this button for 1 second to initiate automatic measurement mode.
Clear Button
The last action is cancelled, or the data display is cleared. If in History storage mode, by pressing the Storage and
Clear button simultaneously, you will clear all stored data in the memory. Press and hold this button to switch off the
instrument. The instrument switches off automatically after three minutes of inactivity to save battery life.
www.megger.com 3
MLM50 Laser Distance Meter
Tuotetiedot
| Merkki: | Megger |
| Kategoria: | Etäisyysmittari |
| Malli: | MLM50 |
Tarvitsetko apua?
Jos tarvitset apua merkille Megger MLM50 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Etäisyysmittari Megger Käyttöohjeet
27 Joulukuuta 2024
Etäisyysmittari Käyttöohjeet
Viimeisimmät Etäisyysmittari Käyttöohjeet
11 Tammikuuta 2025
29 Joulukuuta 2024
10 Joulukuuta 2024