Prime3 GCS41 Käyttöohje
Prime3
Sahauskone
GCS41
Lue alta 📖 käyttöohje suomeksi merkille Prime3 GCS41 (41 sivua) kategoriassa Sahauskone. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/41
Electric chainsaw
Elektrische Kettensäge
Piła łańcuchowa elektryczna
GCS41
Owner’s manual
Bedienungsanleitung
Instrukcja obsługi
2
IMPORTANT INFORMATION
To achieve the highest satisfaction, enjoy the performance of the
product and learn all its features and functions, please read this
manual before using this product.
Before using the device, read the operating instructions and follow
the instructions contained therein. The manufacturer is not liable for
damages caused by the use of the device contrary to its intended use
or improper operation.
The operating manual should be kept so that it can also be used
during later use of the product.
Safety rules for machinery and electrical equipment.
The device is considered suitable for use in countries with a
moderate, evenly humid climate. It can also be used in other countries.
NOTE! Before installation or using the device, it is absolutely
necessary to read the instruction manual and, in particular, the
recommendations concerning the safety of use. Keep the manual for
inspection and pass it on to the next users of the device.
Failure to follow these safety instructions and warnings can result in
electric shock, fire or serious personal injury.
Do not allow children and adolescents to operate the device. Do not
attempt to install, maintain or use the device if you are not familiar
with the operating instructions.
This equipment is not intended to be operated by individuals with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge of the equipment, unless they have been given
supervision or instruction concerning the use of the equipment by
individuals responsible for their safety.
GCS41
Explanation of warning symbols:
1. Hazard warning. Use extreme caution.
2. Important, read the instructions and observe the warnings.
3. Use safety glasses.
4. Wear safety ear muffs.
5. Always disconnect from the power source before repair or
maintenance. Unplug the device immediately if damaged.
6. Do not use the saw in rain or high humidity conditions.
7. Hold the saw securely and operate it with both hands.
8. Observe the safety rules for kickback. Avoid cutting with the top of
the chain guide bar. If so, the saw is can rotate and may move
towards the operator in an uncontrolled manner causing a risk of
injury.
Workplace safety
Keep the work area clean and well lit. Clutter and poor lighting
contribute to accidents.
Before starting work, prepare and clean the area, remove all stones,
branches, wires, and other foreign objects that pose the risk of
tripping.
Take particular care when working on inclined terrain or slopes.
Do not use the electrically powered device in explosive
environments created by flammable liquids, gases or dusts. The may
generate sparks that can ignite dust or vapours.
Do not use the electric saw in places with an extreme risk of fire or
explosion.
The saw is not waterproof. Operating it in rain or humid
environments may result in electric shock.
3
1 2 3 4
5 6 7 8
GCS41
Tuotetiedot
| Merkki: | Prime3 |
| Kategoria: | Sahauskone |
| Malli: | GCS41 |
Tarvitsetko apua?
Jos tarvitset apua merkille Prime3 GCS41 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Sahauskone Prime3 Käyttöohjeet
21 Lokakuuta 2024
Sahauskone Käyttöohjeet
- Sahauskone DeWalt
- Sahauskone Einhell
- Sahauskone Vonroc
- Sahauskone Worx
- Sahauskone Powerplus
- Sahauskone Ozito
- Sahauskone Craftsman
- Sahauskone Maruyama
- Sahauskone Solo
- Sahauskone Triton
- Sahauskone Stalco
Viimeisimmät Sahauskone Käyttöohjeet
26 Lokakuuta 2024
26 Lokakuuta 2024
22 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
20 Lokakuuta 2024
20 Lokakuuta 2024
20 Lokakuuta 2024
20 Lokakuuta 2024
20 Lokakuuta 2024