Rikon 61-200 Käyttöohje
Rikon
Ilmanpuhdistin
61-200
Lue alta 📖 käyttöohje suomeksi merkille Rikon 61-200 (16 sivua) kategoriassa Ilmanpuhdistin. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/16
Air Filtration System
Model: 61-200
Owner’s Manual
For more information:
www.rikontools.com info@rikontools.com or
For Parts or Questions:
techsupport@rikontools.com 877-884-5167or
Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
Part # 61-200M1
Safety Warning
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times.
7KHUHDUHFHUWDLQDSSOLFDWLRQVIRUZKLFKWKLVWRROZDVGHVLJQHG:HVWURQJO\UHFRPPHQGWKDWWKLVWRROQRWEHPRGL¿HGDQG
or used for any other application other than that for which it was designed. If you have any questions about its application,
do not use the tool until you have contacted us and we have advised you.
General Safety Warnings
KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s applications, work
FDSDELOLWLHVDQGLWVVSHFL¿FSRWHQWLDOKD]DUGV
ALWAYS KEEP VISITORS AWAY FROM RUNNING MACHINES.
All visitors should be kept a safe distance from the work area.
ALWAYS MAKE THE WORKSHOP CHILDPROOF.
Childproof with padlocks, master switches, or by removing starter keys.
NEVER OPERATE A TOOL WHILE UNDER THE INFLUENCE OF DRUGS,
MEDICATION, OR ALCOHOL.
ALWAYS WEAR PROPER APPAREL.
Never wear loose clothing or jewelry that might get caught in moving parts. Rubber-soled footwear is
recommended for the best footing.
ALWAYS USE SAFETY GLASSES AND WEAR HEARING PROTECTION.
Also use a face or dust mask if the cutting operation is dusty.
NEVER OVERREACH.
Keep your proper footing and balance at all times.
ALWAYS GROUND ALL TOOLS.
If your tool is equipped with a three-pronged plug, you must plug it into a three-hole electric receptacle.
If you use an adapter to accommodate a two-pronged receptacle, you must attach the adapter plug to a
known ground. Never remove the third prong of the plug.
ALWAYS AVOID DANGEROUS ENVIRONMENTS.
Never use power tools in damp or wet locations. Keep your work area well lighted and clear of clutter.
ALWAYS REMOVE THE ADJUSTING KEYS AND WRENCHES FROM TOOLS AFTER USE.
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on.
ALWAYS KEEP YOUR WORK AREA CLEAN. Cluttered areas and benches invite accidents.
NEVER STAND ON TOOLS.
Serious injury could occur if the tool is tipped or if the cutting tool is accidentally
2
SAVE THESE INSTRUCTIONS.
Refer to them often.
3
California Proposition 65 Warning
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.Your risk from
exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in
DZHOOYHQWLODWHGDUHDDQGZLWKDSSURYHGVDIHW\HTXLSPHQWVXFKDVGXVWPDVNVWKDWDUHVSHFLDOO\GHVLJQHGWR¿OWHURXW
microscopic particles.
For more detailed information about California Propostion 65 log onto rikontools.com.
ALWAYS CHECK FOR DAMAGED PARTS.
Before initial or continual use of the tool, a guard or other part that is damaged should be checked to
assure that it will operate properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation. A guard or other damaged parts should immediately be properly repaired or replaced.
ALWAYS DISCONNECT TOOLS.
Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters.
ALWAYS AVOID ACCIDENTAL STARTING.
Make sure switch is in “OFF” position before plugging in cord.
NEVER LEAVE TOOLS RUNNING UNATTENDED.
Special Safety Rules For Dust Collection
1.Do not operate this machine until you have read all of the following instructions.
2.Do not attempt to operate this machine until it is completely assembled.
3. Do not turn ON this machine if any pieces are missing.
,I\RXDUHQRWIDPLOLDUZLWKWKHRSHUDWLRQRIWKHPDFKLQHREWDLQDVVLVWDQFHIURPDTXDOL¿HG
person.
5.It is highly recommended that this machine be placed on a level surface.
6.Always wear protective eyewear prior to operating this machine.
'RQRWRSHUDWHWKLVPDFKLQHLI\RXDUHXQGHUWKHLQÀXHQFHRIGUXJVDQGRUDOFRKRO
8.Remove all jewelry prior to operating this machine.
9.Do not wear any gloves while operating this machine.
10.Always make sure the power switch is in the OFF position prior to plugging in the machine.
11. Always make sure the power switch is in the OFF position when doing any assembly or setup
operation.
12.Always wear a dust mask when cleaning or working near a dust collector.
13.The use of any accessories or attachments not recommended may cause injury to you and
damage your machine.
14.This machine must be properly grounded.
15.Always keep your face and hands clear of moving parts such as impellors and fans.
16.Keep these instructions for future reference.
Tuotetiedot
| Merkki: | Rikon |
| Kategoria: | Ilmanpuhdistin |
| Malli: | 61-200 |
Tarvitsetko apua?
Jos tarvitset apua merkille Rikon 61-200 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ilmanpuhdistin Rikon Käyttöohjeet
5 Joulukuuta 2024
Ilmanpuhdistin Käyttöohjeet
- Ilmanpuhdistin Sharp
- Ilmanpuhdistin TCL
- Ilmanpuhdistin IKEA
- Ilmanpuhdistin Samsung
- Ilmanpuhdistin Imarflex
- Ilmanpuhdistin Kogan
- Ilmanpuhdistin Panasonic
- Ilmanpuhdistin Olimpia Splendid
- Ilmanpuhdistin Breville
- Ilmanpuhdistin MSR
- Ilmanpuhdistin E.ziclean
- Ilmanpuhdistin GermGuardian
- Ilmanpuhdistin Eldom
- Ilmanpuhdistin Philco
- Ilmanpuhdistin Shark
- Ilmanpuhdistin Bionaire
- Ilmanpuhdistin Homedics
- Ilmanpuhdistin Beghelli
- Ilmanpuhdistin Perfect Aire
- Ilmanpuhdistin Aconatic
- Ilmanpuhdistin Arovec
- Ilmanpuhdistin Sôlt
- Ilmanpuhdistin Vicks
Viimeisimmät Ilmanpuhdistin Käyttöohjeet
14 Joulukuuta 2024
10 Joulukuuta 2024
9 Joulukuuta 2024
9 Joulukuuta 2024
9 Joulukuuta 2024
9 Joulukuuta 2024
9 Joulukuuta 2024
9 Joulukuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024