Scansonic A200 Käyttöohje

Scansonic Vastaanotin A200

Lue alta 📖 käyttöohje suomeksi merkille Scansonic A200 (36 sivua) kategoriassa Vastaanotin. Tämä opas oli hyödyllinen 18 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF
Sivu 1/36
UK User Manual
DE Bedienungsanleitung
DK Brugervejledning
FR Guide d’instructions
IT Manuale di istruzioni
FI Käyttöohje
S Bruksanvisning
Introduction
Thank you for choosing A200, we hope our product
will bring you many years of enjoyment.
Please read this manual fully before unpacking
and installing the product.
Carton contents
During production and packing we have carefully
checked and inspected this amplier.
After unpacking please check for any damage
from transport. We recommend that you keep the
original cartonbox and packing material for any
future shipping.
In the cartonbox you will nd:
1 Input cable, RCA phono type, stereo
1 Input cable 3.5mm jack type, stereo
1 Mains cable
A200 installation
The amplier requires connection to the mains
power supply, so for your safety it is important that
you read this manual carefully.
A200 positioning
Place the amplier on a solid and plane surface,
avoid placement on carpets and other soft
surfaces.
Secure that there is plenty of ventilation around
the amplier, minimum 4” (100mm) free space
behind and above the amplier.
Do not cover the ventilation holes on the backside
of the amplier.
Connecting the A200
First switch off all equipment when connecting
your A200.
Connect the A200 line-in, optical or coaxial (2) with
your TV, smart phone, dockingstation, labtop etc.
Only connect one source.
Do not use use more than one input (line-in, optical
or coaxial) at the same time.
Connect the A200 SUBWOOFER LINE OUTPUT (4)
to a active subwoofer using a mono RCA phono
cable (optional).
Connect the A200 power cable (7) to the mains
voltage, and switch the POWER ON/OFF button (6)
to ON position.
Then turn the knob clockwise to turn on the A200.
For standby mode turn the knob counter clockwise
until you see the red ‘off’ text on the frontpanel of
your minimate.
The 5VDC CHARGE input (1) allow you to charge
your iPod, iPhone and other USB powered
products through the USB port – please note
that the port is only for charging, and not for
transmitting of data.
Connecting the A200 to you loudspeakers
First switch off the A200 on the POWER ON/OFF (6)
button on the rearpanel when connecting the A200
to your loudspeakers.
The binding posts on the output terminals
(5) accepts wire up to Ø 4mm or cables with
bananaplugs.
Make sure that positive terminal binding posts
on the A200 (marked + and coloured red) are
connected to the positive output terminal binding
posts on the loudspeaker and that the negative
terminals on the A200 (marked – and coloured
black) are connected to the negative output
terminal on the loudspeakers.
Operating the A200
The A200 is very easy to operate – after connection
of input source and loudspeakers switch on the
A200 on the POWER ON/OFF (6) button on the
rearpanel and turn the VOLUME knob on the front
panel clockwise to switch ON the amplier.
Adjust the volume by turning the VOLUME knob.
To switch OFF the A200 turn the VOLUME knob
counter clockwise.
Care and cleaning
We don’t recommend use of any solvents or
cleaners on A200 lacquered cabinets, the cabinet
surface usually only requires dusting or cleaning
with a soft cloth (do not use water).
Disconnect the unit from the mains supply if taken
out of use for a longer period.
Environmental information
The A200 comply with international directives
on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and
the disposal of Waste Electrical and Electronic
Equipment (WEEE) - the crossed bin symbol
indicates compliance and that the products
must be appropriately recycled or processed in
accordance with these directives.
Owner’s manual
Troubleshooting
Basic troubleshooting
If the red ’off’ indicator lamp does not light up, check...
• thatthepowercordisrmlypluggedintothewalloutlet
• that the POWER switch on the rear panel is ON
• thatthemainsvoltageiscorrectandmatchingtheamplier
If no sound, check...
• that the Minimate™ is turned on (blue glow around knob)
• that the VOLUME control on the front panel is not all the way down
• thatthelinein,opticalorcoaxialinputcableisrmlypluggedin
• that the loudspeaker cables has been connected properly
If sound is distorted, check...
• that speaker cables are not contacting each other
• that volume is too high
• that input cables are not damaged
• that speakers are not damaged – try switch left and right speaker

Tuotetiedot

Merkki: Scansonic
Kategoria: Vastaanotin
Malli: A200

Tarvitsetko apua?

Jos tarvitset apua merkille Scansonic A200 esitä kysymys alla ja muut käyttäjät vastaavat sinulle


Vastaanotin Scansonic Käyttöohjeet

Scansonic

Scansonic A200 Käyttöohje

15 Lokakuuta 2024

Vastaanotin Käyttöohjeet

Viimeisimmät Vastaanotin Käyttöohjeet

Yamaha

Yamaha Aventage RX-A4A Käyttöohje

9 Huhtikuuta 2025
Yamaha

Yamaha Aventage RX-A8A Käyttöohje

9 Huhtikuuta 2025
Phonocar

Phonocar PH544 Käyttöohje

5 Huhtikuuta 2025
DJI

DJI D-RTK 3 Käyttöohje

4 Huhtikuuta 2025
Harper

Harper HDT2-5010 Käyttöohje

2 Huhtikuuta 2025
Harper

Harper HDT2-2010 Käyttöohje

2 Huhtikuuta 2025
QSC

QSC SPA-Qf 60x2 Käyttöohje

1 Huhtikuuta 2025
Streacom

Streacom TL1 Käyttöohje

30 Maaliskuuta 2025
Graupner

Graupner GR-8 Käyttöohje

30 Maaliskuuta 2025
MB Quart

MB Quart FA2-2000.1 Käyttöohje

29 Maaliskuuta 2025