Scanstrut APT-GPS-01 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Scanstrut APT-GPS-01 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
28-11-19 Issue 3
Tools Required
4mm Hex Wrench
APT-GPS-01
M6 Nylon Insulator Large Grommet
Parts List
x1x1x4 x1
Small Grommet
101832 101829 1026564021
Bondloc 243
Installation Instructions
Antenna Bar
®
101829
4x M6x16mm
(Supplied with PowerTower)
Apply Bondloc to 4 x holes
Cable routing 4x 64021
101832
CAUTION!
CA
CA
CA
CAUTION!
UTION!
UTION!
UTION!
Do not let Bondloc contact
nylon washers (64021)
IMPORTANT
Use of the APT-GPS-01 with unapproved products, or overloading, invalidates any product warranty.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
Product has been designed specically for the mounting of approved marine electronics under normal boating conditions.
IMPORTANT
L’usage des Supports APT-GPS-01 avec des produits non validés, ou la surcharge de ces supports, annulent toute garantie.
Scanstrut déclinent toute responsabilité pour les dégats résultant d’une installation incorrecte.
Linstallation et l’assemblage doivent être inspecs régulièrement an de déceler des dégats ou des pièces désserrées
Ce produit a été spéciquement conçu pour le montage d’appareils d’électronique marine approuvés dans des conditions de navigation normales.
WICHTIG
Durch die Verwendung mit nicht genehmigten Produkten bzw. durch Überlastung wird jegliche Garantie ungültig.
Für Schäden aufgrund unsachgemäßen Einbaus wird keine Haftung übernommen.
Der Anbau und die Baueinheit müssen regelmäßig auf Anzeichen von Schäden oder lockere Teile geprüft werden.
Dieses Produkt wurde spezisch für die Befestigung genehmigter Elektronikgeräte für die Schifahrt unter normalen Bootsfahrtsbedingungen entwickelt.
IMPORTANTE
L’uso di APT-GPS-01 con prodotti non approvati, o un loro sovraccarico, invalida qualsiasi garanzia.
Si declina qualsiasi responsabilità per danni causati da un’installazione erronea.
Linstallazione e il montaggio devono essere ispezionati con regolarità per vericare la presenza di danni o di pezzi allentati.
Questo prodotto è stato studiato appositamente per il supporto di apparecchiature elettroniche navali approvate in normali condizioni di navigazione.
IMPORTANTE
El uso de los APT-GPS-01 con productos no aprobados, o bajo exceso de carga, invalidará cualquier garantía.
No se aceptará ninguna responsabilidad por los daños causados por una instalación incorrecta.
La instalación y ensamblaje deberá inspeccionarse regularmente, comprobando cualquier evidencia de daños o piezas aojadas.
Este producto ha sido especícamente diseñado para el montaje de equipos electrónicos marinos aprobados bajo condiciones normales de navegación.
E-mail: E-mail: sales@scanstrut.com usasales@scanstrut.com

Tuotetiedot

Merkki: Scanstrut
Kategoria: Ei luokiteltu
Malli: APT-GPS-01

Tarvitsetko apua?

Jos tarvitset apua merkille Scanstrut APT-GPS-01 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Scanstrut Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet