Sencor SLA 200 Käyttöohje
Sencor
Laminointijärjestelmä
SLA 200
Lue alta 📖 käyttöohje suomeksi merkille Sencor SLA 200 (6 sivua) kategoriassa Laminointijärjestelmä. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/6
User‘s manual
Návod k obsluze
Návod na obsluhu
Használati útmutató
Instrukcja obs ugił
A4 Laminator
Laminátor A4
Laminátor A4
A4-es felületbevonó
Laminator A4
SLA 200
EN-1
READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE LAMINATOR.
PLEASE KEEP FOR FUTURE REFERENCE.
Instruction Manual
Thank you for choosing a Sencor laminator. We aim to supply quality machines that
create excellent results. Before operating the laminator – please read and keep the user
instructions for reference.
When using electrical appliances, basic precautions should always be followed to reduce risk of
injury or electric shock, including the following:
1. Always unplug the appliance when not in use.
2. This appliance is not intended for use by persons, (including Children), with reduced physical,
sensory or mental capabilities or lack of experience or knowledge. They should be given
supervision and instruction in the use of the appliance, by a person responsible for their safety.
3. The laminator will become very hot in use and care should be taken when handling the machine.
4. Protect against the risk of electrical hazards. Do not immerse the power cord, plug or appliance
in water or other liquids, or use near water.
5. Do not insert any metal objects or other foreign objects such as jewellery, hair, fi ngers or clothing
into the appliance.
6. Remove paper clips and staples before laminating.
7. Do not operate the appliance with a damaged plug or power cord or after the appliance has
malfunctioned or become damaged in some manner.
8. If the Power Cord is damaged, it must be replaced by a qualifi ed Engineer in order to avoid
a hazard,
9. The appliance should be installed near the outlet socket and the socket should be easily
accessible.
10. Only laminate paper or board. Do not laminate unusual objects.
11. Do not use aerosol dusters or cleaners.
12. Do not spray anything into or lubricate the appliance.
Setup
1. Operate the machine on a fl at and stable surface.
2. Ensure there is enough clear space at the rear of the machine for the laminated pouch to exit the
machine.
3. The SLA 200 operates with laminating pouches 100 (2 × 50) micron – 160 (2 × 80) micron thick,
(Credit card size to A4 size).
Operating the laminator
The SLA 200 is operated by a rocker switch, located at the right hand side of the appliance.
There are 2 positions ON (l) and OFF (O).
1. Plug the machines cable into a convenient 13 Amp domestic supply outlet.
2. To Laminate select the ON (I) setting, laminating can begin when the Green “Ready” light comes
on, which indicates the Laminator is hot enough to laminate, (Allow approx 3-5 minutes for the
Laminator to warm up).
3 See “How to load a laminating . Prepare the laminating pouch for inserting into the machine.
pouch below”. Do not use pouches thicker than 160mic (2×80 mic per side).
Tuotetiedot
| Merkki: | Sencor |
| Kategoria: | Laminointijärjestelmä |
| Malli: | SLA 200 |
Tarvitsetko apua?
Jos tarvitset apua merkille Sencor SLA 200 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Laminointijärjestelmä Sencor Käyttöohjeet
24 Lokakuuta 2024
Laminointijärjestelmä Käyttöohjeet
Viimeisimmät Laminointijärjestelmä Käyttöohjeet
21 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024