- 3 -
HOW TO USE
1. Please ensure that all red lights and metal parts are covered by clothes before turning it on.
Note: Do not use on bare skin. Make sure the red lights don’t come in direct contact with the skin.
2. Instructions for how to wear the device are below. Adjust the tightness to your waist.
3. Connect the power plug to the power port on the controller (device’s body).
4. Press the (HEATING) button on the control pad to start the heat radiation and infrared lighting.
-Each press of the button will switch between ON/OFF.
5. Adjust to a comfortable temperature by pressing the Up and Down buttons.
-The device will start at the lowest temperature. You can increase the temperature to your comfort
level.
-Increase temperature between 104°F (40°C) - 131°F (55°C). It will increase in increments of 9°F
(5°C).
-Increase temperature between 132.8°F (56°C) - 149°F (65°C) . It will increase in increments of
1.8°F (1°C).
6. When you’re ready to stop the device, press the [HEATING] button to automatically stop the heating
function.
7. There is a built-in auto timer in the control, which will automatically turn power off after 30 minutes.
-The auto shut off timer will reset itself after an adjustment is made to the temperature or
messaging mode.
8. Press the (VIBRATION] button to turn the vibration massage ON/OFF.
-Press one time, to start the vibration massage. All the motors will vibrate at the same time.
-Press a second time to stop the lower vibration massage and keep the upper vibration massage.
-Press a third time to stop the upper vibration massage and keep the lower vibration massage.
-Press a fourth time to stop the vibration massage.
PLEASE NOTE: The thermostat control system automatically adjusts based on the heat level. The device
will stop warming up when it reaches the preset temperature and restart when it falls below your preset
temperature. (The warming lights will turn on and off during heating.)
1. STANDING USE 2. LYING DOWN USE