SMK-Link VP3600 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille SMK-Link VP3600 (6 sivua) kategoriassa Projektorin lisävaruste. Tämä opas oli hyödyllinen 5 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/6
Page 1
User’s Manual
Projector Ergo Stand
Page 2
Package Contents
Projector stand
Large plate (preinstalled on the stand)
Users manual
Set-up and operating the stand
Remove the projector stand from the packaging box
The large platform converter is already snapped on
to the stand.
If a compact size projector (footprint
smaller than 9.6 x 7.4-inch) is used and a
smaller platform is preferred, lift up the top
plate to reveal the built-in small platform
underneath.
Large Plate
Small Plate
Platform Converter
Page 3
If a larger projector (footprint larger than
9.6 x 7.4-inch) is used or a larger platform is
desired, snap the large platform converter on
to the top of the projector stand to convert it
to a larger platform.
Place the projector on top of the stand. Make sure
the feet of the projector are placed rmly on the top
plate.
Adjust the projector stand top plate to ensure best
projected image result.
Use both hands, grab on the 2 opposite
edges of the projector stand top plate with
the projector on top.
Rotate the top plate to nd the correct angle
of the projected image.
Tilt the top plate to adjust the height of the
projected image.
Always carry the projector stand by holding on to
the bottom of the stand. Do not grab the top plate
as the projector stand may separate from the large
platform adapter and fall off.

Tuotetiedot

Merkki: SMK-Link
Kategoria: Projektorin lisävaruste
Malli: VP3600

Tarvitsetko apua?

Jos tarvitset apua merkille SMK-Link VP3600 esitä kysymys alla ja muut käyttäjät vastaavat sinulle