Soundstream Bass Xtreme BXW-124 Käyttöohje

Soundstream Subwoofer Bass Xtreme BXW-124

Lue alta 📖 käyttöohje suomeksi merkille Soundstream Bass Xtreme BXW-124 (4 sivua) kategoriassa Subwoofer. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
OWNERS MANUAL
Thank you for choosing Soundstream subwoofers, designed & engineered in the
U.S.A. This product combines innovative technology with the finest materials
to consistently deliver absolutely state of the art performance, sound quality,
reliability, and value. This Bass Xtreme subwoofer reflects our commitment to
offer you unparalleled performance and quality for years of dependable service
and listening enjoyment.
Complimenting Bass Xtreme amplifiers, 2019’s BXW-12 woofers combine extreme
performance and affordability. Each 12” woofer has a 4-layer 2” dual 4-ohm voice
coil, with spruce paper cones attached to foam surrounds to keep the momentum
in check. Double-stack 114oz magnet motor structure provide the energy to
get’em jumpin’. Each woofer can handle 800w RMS, and 2,400w peak.
FEATURES, PARAMETERS, & SPECIFICATIONS
Specification BXW-124
Fs (Hz) 31.5
Qms 4.22
Vas (ft3) 2.68
Cms (mm/N) .21
Mms (g) 121.1
Xmax (mm) 8
Xmech (mm) 18
Qes .677
Re (Ω) 7.0
Z (Ω) 8
BL (Tm) 16.1
MAX Power 2,400w
RMS Power 800w
Qts .56
NO (%) .35
Efficiency (1w/1m) 87.5dB
Impedance DVC 4 Ω
Overcompensating Motor Sturcture for Increased Magnetic Strength
10mm T-Yoke & Top Plate Improve Low Frequency Dynamics
Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
2” 4-Layer Voice Coil w/ Spring Loaded Compression Wire Terminals
High-Temperature Tollerance Adhesives Resist Thermal Failure
Spruce Pulp Cone w/ UV & Chemical Protection
Sitched and Glued Surround/Cone Joints for Strongest Bond
Extended Excursion Polyether Foam Surround w/ UV & Chemical Protection
Poly-Cotton Suspension Dampen Violent Accelerations
1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included
OWNERS MANUAL
Vehicle conditions, amplifier, music preferences, & other variables make it
difficult to give you exact dimensions for an enclosure deisgn. For enclosure
designs tailored to your specific needs, please contact us at tech-support@
soundstream.com, or 1-800-724-1377.
All enclosures should be made of .75” (3/4”) material only. When possible, make
the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth of the enclosure to
compensate. All volumes INCLUDE vent/port and subwoofer displacements.
DO NOT change the volume unless you plan on adding a substantial amount
of bracing. For added performance, applying a coat of fiberglass resin to
the interior walls will greatly improve sealing the enclosure. Adding a thin
layer of poly-fill will improve response by smoothing out reflections within
the enclosure.
Below are recommended enclsoure designs and their expected performance:
Volume (ft3) QTC Tuning (Hz)
Min. 1.25 .884 52.5
Opt. 1.50 .785 50.3
Max. 1.75 .725 49.5
Volume (ft3) Round Port Tuning (Hz)
Min. 2.25 3” x 12”L 33.3
Opt. 2.50 4” x 12”L 31.1
Max. 2.75 4” x 14”L 29.3
BXW-124 Recommended Sealed Enclosures
BXW-124 Recommended Ported Enclosures

Tuotetiedot

Merkki: Soundstream
Kategoria: Subwoofer
Malli: Bass Xtreme BXW-124

Tarvitsetko apua?

Jos tarvitset apua merkille Soundstream Bass Xtreme BXW-124 esitä kysymys alla ja muut käyttäjät vastaavat sinulle