SoundTube Teatro TSB3.0 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille SoundTube Teatro TSB3.0 (5 sivua) kategoriassa Soundbar. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/5
Thank you for purchasing the Phase Technology TEATRO® TSB3.0 soundbar.
This high-denition LCR soundbar incorporates PhaseTech’s exclusive
Enhanced Voice Technology (EVT™) circuitry and Spatial Field Expanders
(SFE™) to provide outstanding dialogue clarity along with an open, wide sound
stage.
The TEATRO® TSB-3.0 soundbar speaker is a an ultra thin design made to
t seamlessly under a at panel TV. Both table top and wall mounting options
are included with the product. For on-wall applications, the mounting bracket
has adjustments for lining up and vertically leveling the speaker with the TV.
The soundbar cabinet also has threaded inserts for mounting the TSB3.0 to a
display wall bracket mechanism.
Note: please check with the display mount manufacturer for compatibility and
ensure the display mount will support a 12 pound soundbar.
Regardless of application, serious audiophile listening or home theater, we
recommend that you take the time to read this manual thoroughly before
connecting speakers to your amplier or receiver. In the highly unlikely event
that you should experience a problem with set-up or operation, please contact
one of our authorized dealers for assistance, or contact us directly.
Phase Technology Corporation
8005 W. 110th St., Suite 208
Overland Park, KS 66210
855.663.5600 (Domestic)
+1.913.663.5600 (International)
Fax: 913.663.3200
SAFETY INSTRUCTIONS 2
MOUNTING INSTRUCTIONS 3
WALL MOUNTING 3
TABLE TOP MOUNTING 4
CARING FOR YOUR SPEAKERS 5
MAINTENANCE AND SERVICE 5
TROUBLESHOOTING 5
WARRANTY 5
SPECIFICATIONS 5
CAUTION: BE VERY CAREFUL NOT TO DAMAGE THE MIDRANGE DOMES OR SFE [SPATIAL FIELD EXPANDERS™] DRIVERS LOCATED
ON THE SIDE OF THE CABINET WHILE HANDLING THE SOUNDBAR.
2. Mounting Bracket x2
1. TEATRO® TSB3.0
3. Mounting Pin x2
4. Leveling Screw x2
5. Table Top Mounting Feet x2
6. Table Top Mounting Feet Screws x4
7. Table Top Mounting Screws x2
8. Euroblock Connectors x3
[INCLUDED IN THE BOX]
OFF O N
EVT
TEATRO®
OWNER’S MANUAL: TSB3.0
2
1. Read Instructions - All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and other instructions should be
followed.
5. Water and Moisture - The appliance should not be used near water -
for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
PORTABLE CART WARNING
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall
or ceiling only as recommended by the manufacturer.
[SAFETY INSTRUCTIONS] 8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the ow of air through the
ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as
radiators, stoves, or other appliances that produce heat.
10. Power Source - The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on the
appliance.
11. Power Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed up or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
12. Cleaning - The appliance should be cleaned only as recommended by
the manufacturer.
13. Nonuse Periods - The power cord of the appliance should be unplugged
from the outlet when left unused for a long period of time.
14. Object and Liquid Entry - Care should be taken so that neither objects
fall nor liquids spill into the inside of the appliance.
15. Damage Requiring Service - The application should be serviced by
qualied service personnel when:
a. the power supply cord or the plug has been damaged,
b. objects have fallen onto or liquid has been spilled into the appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or exhibits a marked
change in performance, or
e. the appliance has been dropped or the cabinet damaged.
16. Servicing - The user should not attempt to service the appliance
beyond those means described in the operating instructions. All other
servicing should be referred to qualied service personnel.
17. Grounding or Polarization - Precautions should be taken so that the
grounding or polarization means of an appliance is not defeated.
Explanation of Graphical Symbols
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of un-insulated “dangerous voltage: within the product’s
enclosure that may be off sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR
USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.
CAUTION: To reduce the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer servicing to qualied
service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Copyright © 2016 MS Electronics, LLC. All rights reserved. MSE Audio, Phase Technology and PhaseTech are registered trademarks and
“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio
®. www.phasetech.com.
3
[MOUNTING INSTRUCTIONS]
When selecting the speaker mounting location, it is prudent to take a few
extra minutes to carefully inspect and measure the wall where you intend to
mount the TSB3.0 speaker and your at panel display. An inspection of the
room, or rooms, that back up to the wall you have selected for mounting the
TSB3.0 can often alert you to potential obstacles. An electronic stud-nder
is a useful tool to assist you in selecting the speaker placement, but be
cautious as they often give false readings. For example, if the wall you want
to mount to happens to be the common wall for a bathroom or kitchen,
there is a good chance you will encounter water or sewer pipes in the wall
that will not be detected by a stud-nder. It is recommended, that wherever
possible, you try to fasten these mounting brackets to a vertical stud with
the appropriate wood screws. If it is not possible to mount the brackets over
the studs then it is recommended that the appropriate hollow wall anchors
or toggle bolts be used to mount the TSB3.0.
Note: In order for the Spatial Field Expanders to operate correctly, the sides
of the soundbar must not be obstructed.
STEP 1
Determine that the desired mounting location is safe and clear of any
physical obstructions that might hinder the proper installation of the
speakers. If the at panel monitor is already installed on the wall you can
use it as a guide for the installation of the speaker. For the best appearance,
it is recommended that the speaker be installed symmetrically beneath the
monitor. The Soundbar’s response characteristics will be best if you mount
it within a few inches of the at panel display.
Special consideration must be taken to run three (3) sets of speaker leads
to the TSB3.0 speakers. One pair each will be connected to the left and
right channel on your amplier and the other pair will be used for the center
channel. Be certain that you can get the speaker wire to the locations
where you plan to mount the speaker systems.
Please note that the TSB3.0 speakers are designed to mount very close to
the wall and the brackets only allow about .5” of clearance so be certain to
make allowances for this with your speaker connectors and wire clearances.
We suggest that you use a minimum of AWG 16 wire. Pre-run your speaker
wire to the determined locations and be certain to leave about two feet
of extra wire for the nal speaker installation. If the at panel monitor is
not yet mounted to the wall, mount the display rst before mounting the
speakers.
sure this mark is also 2.5” below the TV. Repeat this process on the right
side of the display – making sure that this mark is level with the mark on
the left side. This will create two marks that are 16” apart and 2.5” below
the bottom of your display . You have now identied the location (Figure 1)
for the two wall brackets for the TSB3.0 speaker.
Using a 1/16” drill bit, drill a pilot hole at each of your two marks above.
Place one of the wall brackets on the wall and align the pilot hole with the
bottom slot on the bracket and drill a second pilot hole in the center of the
upper slot on the bracket . This hole will be 7/8” above the rst (Figure 2)
pilot hole. Repeat this process for the bracket on the other side. These pilot
holes will let you know if your mounting bracket location is over a wall stud
or not. If it is over a stud then that bracket can be installed with a suitable
screw (for mounting on sheetrock walls, we recommend at least a #10 x
1.5” pan head screw and a at washer between the screw and the bracket).
If the location for the bracket is not over a wall stud, then suitable drywall
anchors that can support 15 lbs each must be used.
STEP 2.1 – WALL MOUNTING
For the best audio experience, the TSB3.0 speaker should be centrally
aligned and mounted directly below the TV display. Each speaker comes
with two identical Mounting Brackets and these should be mounted to the
wall 16 inches apart and centrally located under the TV.
First, locate the center line of your TV display and make a light pencil mark
on the wall that is 2.5” below the bottom of your display. Next, measure to
the left of this mark exactly 8” and make another mark at that point. Make
[FIGURE 2]
Following the guidelines above, mount the two brackets to the wall. Once
they are installed check that the center distance between the vertical
mounting slots on the two brackets is exactly 16”. Adjust the brackets with
the horizontal slots until on they are 16” apart.
Locate the two holes on the back of the speaker that are 8” apart from the
center hole and install the two Mounting Pins in these holes (Figure 3).
Your TSB3.0 speaker is now ready to be mounted to the wall.
Connect the Left Center and Right inputs from your surround receiver
to the Male Euroblock connectors included with the speaker. Be careful
to observe proper polarity; + (red) on your receiver to + on the speaker
Euroblock connector. Connect the appropriate Euroblock connector to
the left/center/right inputs on the back of the speaker before placing your
speaker on the Mounting Brackets.
[FIGURE 1]
16”
2.5”
Flat Panel Display
Flat Panel Display
[FIGURE 3]
Tuotetiedot
| Merkki: | SoundTube |
| Kategoria: | Soundbar |
| Malli: | Teatro TSB3.0 |
Tarvitsetko apua?
Jos tarvitset apua merkille SoundTube Teatro TSB3.0 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Soundbar SoundTube Käyttöohjeet
10 Joulukuuta 2024
10 Joulukuuta 2024
10 Joulukuuta 2024
10 Joulukuuta 2024
Soundbar Käyttöohjeet
- Soundbar Thomson
- Soundbar Insignia
- Soundbar LG
- Soundbar TCL
- Soundbar Samsung
- Soundbar Kogan
- Soundbar Sony
- Soundbar Schneider
- Soundbar JBL
- Soundbar Majority
- Soundbar Muse
- Soundbar Sven
- Soundbar Vizio
- Soundbar Aconatic
- Soundbar Boston Acoustics
Viimeisimmät Soundbar Käyttöohjeet
17 Joulukuuta 2024
10 Joulukuuta 2024
9 Joulukuuta 2024
8 Joulukuuta 2024
8 Joulukuuta 2024
6 Joulukuuta 2024
25 Lokakuuta 2024
24 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024