StarTech.com USB31C2SAT3 Käyttöohje
StarTech.com
Muut tietokonetarvikkeet
USB31C2SAT3
Lue alta 📖 käyttöohje suomeksi merkille StarTech.com USB31C2SAT3 (2 sivua) kategoriassa Muut tietokonetarvikkeet. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/2
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 04/19/2017
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/USB31C2SAT3.
Package contents
• 1 x adapter cable
• 1 x universal power adapter (NA/JP, UK, EU, ANZ)
• 1 x quick-start guide
Requirements
• USB-enabled computer system with an available USB-C port
The USB31C2SAT3 is OS independent and doesn’t require any
additional drivers or software.
Note: To obtain the maximum USB throughput, you must use a
system with a USB 3.1 Gen 2 (10Gbps) port.
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/USB31C2SAT3.
USB31C2SAT3
USB 3.1 (10Gbps) Adapter Cable for 2.5/3.5” SATA Drives - USB-C
*actual product may vary from photos
Product diagram
Connect the adapter
Warning! Drives should be handled carefully, especially when they’re
transported. If you’re not careful with your drive, you may lose data
as a result. Make sure that you’re properly grounded by wearing an
anti-static strap when you install any computer component. If an
anti-static strap isn’t available, touch a large, grounded metal surface
for several seconds to discharge any built-up static electricity.
1. Connect a 2.5” or 3.5” SATA SSD or HDD to the SATA connector on
the adapter.
2. Connect the universal power adapter to the power adapter port
on the adapter and an electrical outlet.
Note: You can use most 2.5” drives without connecting the universal
power adapter, as enough power is provided through the USB
connection. If you use a 3.5” drive, you need to connect the universal
power adapter.
3. Connect the integrated USB-C connector to an available USB port
on your computer.
About driver installation
After you connect the adapter to your computer, the computer
detects the adapter and automatically installs the driver. You don’t
need to take any further action to install the driver.
Prepare a drive for use
Windows OS
If you connect a drive that already has data on it, after you connect
the adapter, it appears under My Computer Computer or with a
drive letter assigned to it.
If you install a brand-new drive that doesn’t contain any data, you
must prepare the drive for use.
Warning! When you complete the following steps, all of the data
on your drive will be deleted. If your drive has data on it that you
require, you should create a backup le or use a dierent drive.
SATA
connector
USB-C
connector
Power/activity
LED
Power adapter port
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
1. Depending on the version of OS that you’re running, do one of
the following:
• On your desktop, right-click and click .My Computer Manage
• On your desktop, right-click Computer Manage and click .
• Click the button or Start Windows icon. Type compmgmt.msc
and press .Enter
2. On the Computer Management Disk Management screen, click .
3. Locate the disk that is labeled . To conrm that the Unallocated
drive is the correct one, check the drive capacity.
4. Right-click the section of the window that says and Unallocated
click .New Partition
5. To initialize the drive in the format of your choice, complete the
on-screen instructions.
When the drive is successfully installed, it appears under My
Computer Computer or with a drive letter assigned to it.
macOS
If you install a brand-new drive that doesn’t contain any data, you
must prepare the drive for use.
Warning! When you complete the following steps, all of the data
on your drive will be deleted. If your drive has data on it that you
require, you should create a backup le or use a dierent drive.
1. Do one of the following:
• In , enter .Spotlight Disk Utility
• Open . Navigate to and click .Finder Applications Utilities
• Open .Disk Utility
2. Select the new drive and click the tab.Partition
3. Enter a name for the partition.
4. Click .Apply
The drive should now appear on your desktop and be accessible in
Finder.
Disconnect a drive
Windows
1. On the task bar on your desktop, click the Safely Remove
Hardware and Eject Media icon.
2. Click .Eject USB Device
3. When the Safe to Remove Hardware message appears,
disconnect the adapter from your computer.
Warning! If you disconnect the drive before you receive a
notication that says it’s safe to do so, you could experience lost or
corrupted data.
macOS
1. Close any of the windows that list the contents of the removable
drive.
2. On the desktop, click the icon and drag it onto the USB storage
trash can icon on your desktop.
3. Wait ve seconds and then disconnect the adapter from your
computer.
About the LED indicator
The USB31C2SAT3 features a power and activity LED (green).
LED behavior Signicance
LED is illuminated The adapter is receiving power.
LED is illuminated and blinking The drive is being accessed.
Tuotetiedot
| Merkki: | StarTech.com |
| Kategoria: | Muut tietokonetarvikkeet |
| Malli: | USB31C2SAT3 |
Tarvitsetko apua?
Jos tarvitset apua merkille StarTech.com USB31C2SAT3 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Muut tietokonetarvikkeet StarTech.com Käyttöohjeet
26 Lokakuuta 2024
26 Lokakuuta 2024
18 Lokakuuta 2024
Muut tietokonetarvikkeet Käyttöohjeet
- Muut tietokonetarvikkeet Gembird
- Muut tietokonetarvikkeet Lindy
- Muut tietokonetarvikkeet Lenovo
- Muut tietokonetarvikkeet Rocstor
- Muut tietokonetarvikkeet Vantec
- Muut tietokonetarvikkeet Techly
Viimeisimmät Muut tietokonetarvikkeet Käyttöohjeet
19 Lokakuuta 2024
19 Lokakuuta 2024
19 Lokakuuta 2024
19 Lokakuuta 2024
18 Lokakuuta 2024
17 Lokakuuta 2024
17 Lokakuuta 2024
17 Lokakuuta 2024
17 Lokakuuta 2024
16 Lokakuuta 2024