Synco P2S Käyttöohje

Synco Mikrofoni P2S

Lue alta 📖 käyttöohje suomeksi merkille Synco P2S (2 sivua) kategoriassa Mikrofoni. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF
Sivu 1/2
Microphone P2 Series
User Manual
Thank you for choosing SYNCO product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Transmitter x2 Wireless Charging
Storage x1
Charging cable x1Mic Windshield x2
1. TX Transmitter
2. RX Receiver
3. Wireless Charging Case
① Power Key
② Working Indicator
③ Built-in Microphone
④ Contacts
⑤ Back Clip
Lightning Connector
Type-C Connector
① Volume Button
② Type-C Port
③ Working Indicator
④ Connector
⑤ Contacts
① Pairing Key /
Power Indicator Key
② Type-C port
③ Working Indicator
④ Contacts
Caring For Your SYNCO Product
Package List
Product Introduction
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, impact of external force.
· Do not attempt to disassemble the product. Doing so voids
warranty.
· Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
· Failure to follow all the instructions may result in mechanics
damage.
· Warranty does not apply to human errors.
Receiver (Type-C or
Lightning Connector) x1
4.Indicator
① Transmitter
② Receiver
③ Wireless Charging Case
Fast Flash
Left Right
Fast Flash
1~5 indicators on
Single indicator keeps on
(In the case)
Slow Flash
Slow Flash
Illuminate sequentially
1~5 indicators on
Single indicator keeps on
Single indicator 󽗊ashed
slowly
Pairing
Pairing
The number of lights on indicates the
current volume
Charging, and turns o󽗈 when fully
charged
Unpaired
Unpaired
Paired, normal working
Connected and working normally.
The number of lights on indicates the
current volume
Noise cancellation on
Mute on
Working Indicators (White Light) On： Flash：
Working Indicators (White Light) On： Flash：
Working Indicators (White Light) On： Flash：
Working Indicators (Red Light) On： Flash：
Left Right
1. Basic operations
2. Turn it on/o󽗈
Operations
Tap the drawer to the right of the charging box and take out the
transmitter and receiver.
Transmitter:
The transmitter(s) automatically turn(s) on after be taken out, and
automatically shut down when be put back into the charging box;
(Force switch on and o󽗈: long press the power button of the
transmitter for 3 seconds)
*Note: The transmitter will shut down automatically if it unpaired or
disconnected for 5 minutes.
3. Charge
Receiver:
Insert the mobile phone device to switch on automatically, and the
indicator 󽗊ashes.
*Note: You can check whether the mobile phone OTG is on when he
receiver indicator is not on after be inserted to the mobile phone.
Transmitter:
Connect the contact of transmitter to the charging box when put the
transmitter back into the charging box.
Charging case:
Connected the charging box to the power supply through the
charging cable, and the charging box water lamp circulates during
charging.
Short press the power indicator button, the number of indicator
lights shows the power condition.
Charging Mobile phone :
Insert your phone's charging cable into the Type-C port of the
receiver when in use, and the charging current is adjusted according
to the phone's battery max up to 800mA。
*Note: The receiver does not need to be charged and can be used
directly when plugged in the phone.
Guangzhou Zhiying Technology Co., Ltd
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue,
Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.cn
Warranty Period
Warranty Exclusions and Limitations
Warranty Claim Procedure
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case
of quality defect(s) found in the product under normal use within 30
days upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty
service. The warranty period begins on the date of purchase of brand
new, unused products by the 󽗉rst end-user.
Faults resulted from inappropriate use of a product without
following its operation speci󽗉cation
1. Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
2. Modi󽗉cations to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit,
label alteration
3. The code on product is inconsistent with that of warranty
certi󽗉cate, or the code on the product or warranty certi󽗉cate is
altered or torn o󽗈
4. All consumable accessory attached to a product, like cable, wind
mu󽗈, battery
5. Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
1. If failure or any problem occurs to your product after
purchase, please contact a local agent for assistance, or you can
always contact SYNCO’s customer service through email at
support@syncoaudio.com.
2. Please retain your sales receipt and warranty certi󽗉cate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
3. If the SYNCO product is out of the warranty coverage, the service
and the parts cost will be charged.
Warranty
Within the warranty period, if product defect or failure is attributable
to material defection or technological problem, the defective product
or defective part will be repaired or replaced without charge (service
and materials fee).
*Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
support@syncoaudio.com
WARRANTY CERTIFICATE
Wireless Transmission
RF Frequency Band
Frequency Response
Working Distance
Sampling Rate
Bit Depth
Sensitivity
SNR
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
Connector
Power Input
Dimensions
Material
Weight
Battery Type
Battery Charging Time
Charging Port
Power Requirements
Dimensions
Weight
Digital 2.4GHz
2400-2483.5MHz
20Hz-20KHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
-36dB
＞ 75dB
Built-in Lithium Battery, 120mAh
1.5H
5H
49x19x19 (mm)
ABS
10g
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
Type-C or Lightning Output
Type-C
49x30x9 (mm)
ABS
5g
Built-in Lithium Battery, 700mAh
2H
Type-C Port
5V 2A
70x68x38(mm)
87.5g
5. Adjust the volume
TX Transmitter
RX Receiver
Wireless Charging Case
6. Noise reduction
Click the receiver volume button to adjust the volume and the
number of indicators shows the current volume level.
Double click the volume button to enable or disable mute and single
indicator keeps on when mute is on.
Click the power button of the transmitter to turn on the noise
reduction, and single indicator keeps on.
* Double click the power button of the transmitter to turn o󽗈/on the
light e󽗈ect.
Speci󽗉cations
4. Paring
Pairing in the charging box:
① Place the transmitter and receiver in the charging box, and
connect the contact with the contact of the charging box;
② Open the charging box, press and hold the matching button on
the box for 3 seconds;
③ The indicator lights of the transmitter and receiver cycle, and the
pairing is successful.
Pairing in use:
① The receiver has been inserted into the mobile phone and is
switched on;
② Turn o󽗈 the transmitter, press and hold for 8 seconds when it is
turned o󽗈, and wait for 󽗉ve indicator lights to 󽗊ash quickly to enter
the frequency alignment state.
③ The working indicator light of transmitter and receiver is broken,
and the matching is successful.
Product Model:
Date of Purchase:
Serial Number:
Malfunction Description :
Buyer Name:
Buyer Telephone :
Buyer Mail :
Buyer Address :
Dealer :
Dealer Telephone :
Delivery Date :
Cause of Malfunction :
Maintenance Personnel :
Malfunction Processing :

Tuotetiedot

Merkki: Synco
Kategoria: Mikrofoni
Malli: P2S

Tarvitsetko apua?

Jos tarvitset apua merkille Synco P2S esitä kysymys alla ja muut käyttäjät vastaavat sinulle


Mikrofoni Synco Käyttöohjeet

Synco

Synco LAV-S6P Käyttöohje

29 Maaliskuuta 2025
Synco

Synco MA30 Käyttöohje

27 Maaliskuuta 2025
Synco

Synco P2S Käyttöohje

27 Maaliskuuta 2025
Synco

Synco WAir-G2-A1 Käyttöohje

26 Helmikuuta 2025
Synco

Synco WAir-G2-A2 Käyttöohje

26 Joulukuuta 2024

Mikrofoni Käyttöohjeet

Viimeisimmät Mikrofoni Käyttöohjeet

Samson

Samson Concert XD2 Käyttöohje

30 Maaliskuuta 2025
TC Helicon

TC Helicon GoXLR MIC Käyttöohje

27 Maaliskuuta 2025
Astatic

Astatic 827A Käyttöohje

27 Maaliskuuta 2025
MXL

MXL Forge Käyttöohje

22 Maaliskuuta 2025
Austrian Audio

Austrian Audio OC16 Käyttöohje

19 Maaliskuuta 2025
Kenwood

Kenwood KMC-66 Käyttöohje

18 Maaliskuuta 2025
Kenwood

Kenwood KMC-70 Käyttöohje

18 Maaliskuuta 2025
Kenwood

Kenwood KMC-32 Käyttöohje

18 Maaliskuuta 2025
Comica

Comica Vimo C2 Käyttöohje

12 Maaliskuuta 2025
Louroe Electronics

Louroe Electronics Verifact B Käyttöohje

10 Maaliskuuta 2025