Toolland WHORW2T Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Toolland WHORW2T (16 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/16
WHORW2T/WHORW4T
EN
HORIZONTAL WINCH
NL
HANDLIER HORIZONTAAL
FR
TREUIL HORIZONTAL
ES
CABRESTANTE HORIZONT AL
DE
HANDSEILWINDE
PL
WYCIĄGARKA POZIOMA
PT
POLIA DE MÃO HORIZONTAL
USER MANUAL 2
GEBRUIKERSHANDLEIDING 4
MODE D’EMPLOI 6
MANUAL DEL USUARIO 8
BEDIENUNGSANLEITUNG 10
INSTRUKCJA OBSŁUGI 12
MANUAL DO UTILIZADOR 14
WHORW2T/WHORW4T
V. 02 07/02/2017 2 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Always inspect the cable throughout its length for kinks, frays or any damage before each use.
Do not pull the cable around a corner.
Fix load securely; do not wrap winch cable around load.
Do not pull more than rated load. Never overload the winch.
Never lengthen the lever using a pipe for additional leverage. This can cause the winch lever to bend or
break.
Operate winch with at least 3 wraps of cable on spindle.
Always use an adequate sling, eyebolt or other accessory attached to the load to be pulled. Make sure there
is positive engagement of the winch hook to the load.
Do not lift any loads with this winch.
3. Description
4. Extending the Cable
Secure the winch to a rigid anchor point. Pull the drive pawl spring in the direction of the arrow (see fig. 2,
detail A). Raise the handle and hold it firmly into position (see fig. 2, detail C). Press the stop pawl in the
direction of the arrow (see fig. 2, detail D) and pull until the desired slack is obtained.
WHORW2T/WHORW4T
V. 02 07/02/2017 3 ©Velleman nv
5. Pulling a Load or Applying Tension
Engage the drive pawl and ratchet wheel by pushing the pawl in the direction of the arrow (see fig. 2, detail B).
Each stroke of the handle will wind the cable and pull the load.
6. Slackening the Cable
Pull the pawl spring in the direction of the arrow (see fig. 2, detail A). Steadily push the handle until the drive
pawl pushes and disengages the stop pawl to clear the ratchet teeth. This will release the load one notch.
Repeat this motion as required until the cable is sufficiently slackened.
CAUTION! When releasing the load, avoid abrupt movements. Apply a steady pressure to the handle.
7. Technical Specifications
max. cable length
WHORW2T ...................................................................................................... 3.6 m
WHORW4T ......................................................................................................... 3 m
cable Ø
WHORW2T ...................................................................................................... 5 mm
WHORW4T ................................................................................................... 5.7 mm
working capacity
WHORW2T ................................................................................................... 1000 kg
WHORW4T ................................................................................................... 1500 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.

Tuotetiedot

Merkki: Toolland
Kategoria: Ei luokiteltu
Malli: WHORW2T

Tarvitsetko apua?

Jos tarvitset apua merkille Toolland WHORW2T esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Toolland Käyttöohjeet

Toolland

Toolland 2002-200 Käyttöohje

8 Joulukuuta 2024
Toolland

Toolland WHORW2T Käyttöohje

8 Joulukuuta 2024
Toolland

Toolland WEH300 Käyttöohje

8 Joulukuuta 2024
Toolland

Toolland QT113 Käyttöohje

8 Joulukuuta 2024
Toolland

Toolland QT123 Käyttöohje

8 Joulukuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet