Vaddio Twin Mono AMP Käyttöohje

Vaddio Vastaanotin Twin Mono AMP

Lue alta 📖 käyttöohje suomeksi merkille Vaddio Twin Mono AMP (6 sivua) kategoriassa Vastaanotin. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/6
Document Number 411-0059-31 Rev C – May 2022
Installation Guide for the
Twin Mono AMP Single-Input Two-Channel Amplifier
The Twin Mono AMP is an 8 ohm, 30 watt mono power audio amplifier with a single differential input
feeding two amplified outputs, each capable of driving into loads as low as 4 ohms. The Twin Mono AMP
drives two analog speakers such as the Vaddio Ceiling Speaker, EasyTalk Sound Bar, or third-party
speakers.
Overview
This guide covers:
Twin Mono AMP single-input two-channel amplifier:
n999-9995-330 (North America)
n999-9995-331 (Europe/UK)
n999-9995-339 (Australia/New Zealand)
Features
nSimple mounting
nPower indicator light
nConnects to ConferenceSHOT AV camera using the camera’s speaker cable
nAdditional connectors provided for making custom cables
Specifications
Power requirements 9 to 20 VDC, 30 W
(Ships with 15 V 2A power supply)
Input Balanced audio, one channel
Input impedance > 100K ohms
Output Two channels (monophonic)
Output power 15 W per channel
Minimum output impedance 4 ohms per channel
Dimensions Height 3.6 in. (9.1 cm)
Width 4.48 in. (11.4 cm)
Depth 1.25 in. (3.2 cm)
Weight 1.1 lbs. (0.5 kg, or 211 standard 2x4 LEGO ®blocks)
What's Included
nTwin Mono AMP
n15 V, 2A power supply
nConferenceSHOT AV-compatible audio cable, 8 in. (20 cm)
n2-conductor 5 mm Phoenix style plugs, qty. 2, for use in making cables for your installation
A Quick Look at the Twin Mono AMP
Here it is: The art of easy.
Front
nPower indicator
nMounting flange
Input side
n4-conductor Phoenix-style plug, 5 mm pitch
nConvenient labeling to assist in making cables correctly
nCable connector included
Output side
nTwo output channels, 2-conductor Phoenix-style plug, 5 mm pitch
nCable connectors included
Installation Guide for the Twin Mono AMP Single-Input Two-Channel Amplifier
2
Installation
This section covers:
nCabling information
nConnection diagrams
nMounting information
Don’t Void Your Warranty!
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Caution
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of
these things happen, return it to Vaddio for safety and functional testing.
Cabling Notes
Use the connectors provided with the Twin Mono AMP to make cables for your installation.
We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or routed near
sources of electromagnetic interference such as power lines or fluorescent light fixtures.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in
equipment damage and will void the warranty.
Pro Tip
Label all cables at both ends.
Connector Pin-Outs
Input connector:
Pin 1 Audio +
Pin 2 Audio –
Pin 3 Ground
Pin 4 +12 VDC
Output connectors:
Pin 1 Audio –
Pin 2 Audio +
3
Installation Guide for the Twin Mono AMP Single-Input Two-Channel Amplifier

Tuotetiedot

Merkki: Vaddio
Kategoria: Vastaanotin
Malli: Twin Mono AMP

Tarvitsetko apua?

Jos tarvitset apua merkille Vaddio Twin Mono AMP esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Vastaanotin Vaddio Käyttöohjeet

Vastaanotin Käyttöohjeet

Viimeisimmät Vastaanotin Käyttöohjeet