VTech VC2105 Käyttöohje
VTech
Itkuhälytin
VC2105
Lue alta 📖 käyttöohje suomeksi merkille VTech VC2105 (2 sivua) kategoriassa Itkuhälytin. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/2
Transmit frequency Baby unit: 2412 - 2472 MHz
Parent unit: 2412 - 2472 MHz
Channels 13
LCD 5’’ Color LCD
(IPS 1280x720 pixels)
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may
vary according to environmental conditions at the time of use.
Power requirement Baby unit power adapter: Output: 5V DC, 1.5A
Parent unit power adapter: Output: 5V DC, 2A
Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery
Specifications are subject to change without notice.
© 2023 VTech Technologies Canada Ltd.
All rights reserved. 03/23. VC2105_CA_QSG_V1
Technical specications
UL STD.
62368-1
CERTIFIED TO
CSA STD.
C22.2 NO.62368-1
CO ORMS TO NF
Android TM and Google Play TM are trademarks of Google Inc.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Congratulations
on purchasing your new VTech product.
Before using this baby monitor, please read the Important safety instructions.
VC2105
5” Smart Nursery
Over-the-Crib Mount Monitor
What does HD Video Monitor do?
VTech 5” Smart Nursery Over-the-Crib Mount Monitor allows you to stay close to your
baby when you are on the move or away. This monitor is Wi-Fi enabled, using your home
wireless network to stream live video and audio through the 1080p baby unit and 5-inch
color screen parent unit. It allows you to maintain a constant connection to your baby.
You can also monitor from your smartphone or mobile tablet.
VTech 5” Smart Wi-Fi 1080p Video Monitor uses MyVTech Baby Plus app to let you
instantly see and hear what’s happening with your baby from anywhere in the world. The
app can be downloaded from the App Store or the Google Play TM Store.
Go to www.vtechcanada.com for
the latest VTech product news.
ore support information
(Canada version)
Our products are NOT medical devices. They are not intended for use as medical devices or to replace
medical devices. They shall not be relied upon for any type of clinical monitoring. They are not designed
to and are not intended to diagnose, treat, cure, mitigate, alleviate or prevent any disease or other condi-
tion, including but not limited to, sudden infant death syndrome (SIDS).
Our products are only intended to assist you in tracking your baby’s general sleep patterns. False positive
or false negative readings about your baby’s sleep patterns are a potential risk of our products. Our prod-
ucts are not a substitute for medical consultation and treatment or adult supervision and care.
Disclaimer
The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above 6.5
feet (2 meters).
4. This product is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not be
used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to a
bath, sink, swimming pool or shower.
7. CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during
use, storage or transportation. Disposal of battery in fire or
a hot oven, mechanically crushing or cutting the battery can
result in an explosion. Leaving the battery in an extremely
high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas. Dispose
of used battery according to the information in . The RBRC seal
8. Use only the power adapters included with this product.
Incorrect power adapter polarity or voltage can seriously
damage the product.
Power adapter information:
Baby Unit Output: 5V DC 1.5A
VTech Telecommunications Ltd.
Model: VT07EUS05150
Parent Unit Output: 5V DC 2A
VTech Telecommunications Ltd.
Model: VT07EUS05200
Rechargeable battery information:
3.7V 5000mAh, 18.5Wh Lithium-ion battery
Zhuhai Great Power Energy Co., Ltd.
Model: GSP806090-5Ah-3.7V-1S1P
9. The power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet (power adapter)
should be installed near the equipment and should be easily
accessible.
11. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
12. Do not modify the power adapters or replace with other
adapters, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
14. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply in your home, consult your dealer or
electricity supply provider.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf, stand or
other unstable surfaces.
17. This product should not be placed in any area where proper
ventilation is not provided. Slots and openings in the back or
bottom of this product are provided for ventilation. To protect
them from overheating, these openings must not be blocked
by placing the product on a soft surface such as a bed, sofa
or rug. This product should never be placed near or over a
radiator or heat source.
18. Never push objects of any kind into this product through the slots
because they may touch dangerous voltage points or create a
short circuit. Never spill liquid of any kind on the product.
19. To reduce the risk of electric shock, do not disassemble
this product, but take it to an authorized service facility.
Disassembling or removing parts of the product other than
via the battery door may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock
when the product is subsequently used.
20. You should test the sound reception every time you turn on
the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset the baby
monitor periodically by powering off and then powering
on the units, and power off the baby monitor if you are not
intending to use it for some time.
23. Children should be supervised to ensure that they do not play
with the product.
24. The small parts of this monitor can be swallowed by babies or
small children. Keep these parts out of reach of children.
25. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
• Use and store the product at a temperature between 32 oF
(0oC and 104)oF (40oC).
• Mishandling batteries can cause burn, fire or explosion
hazards.
• Batteries should not be exposed to excessive heat such as
bright sunshine or fire.
• Do not expose the product to extreme cold, heat or direct
sunlight. Do not put the product close to a heating source.
• Warning—Strangulation Hazard—Children
have STRANGLED in cords. Keep this cord out of
the reach of children (more than 3 ft (0.9m) away).
Do not remove warning label on the adapter cord.
• Never place the camera unit(s) inside the baby’s crib or
playpen. Never cover the camera unit(s) or parent unit with
anything such as a towel or a blanket.
• Other electronic products may cause interference with your
camera unit. Try installing your camera unit as far away from
these electronic devices as possible: wireless routers, radios,
cellular telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless
telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and implanted
cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the
pacemaker.
• Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using wireless devices.
Electromagnetic elds (EMF)
This VTech product complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according
to the instructions in this user’s manual, the product is safe to be
used based on scientific evidence available today.
Important safety instructions What’s in the box
Quick start guide
Your baby monitor package contains the following items. Save your sales receipt and original
packaging in the event warranty service is necessary.
For mobile access:
MyVTech Baby Plus mobile app
Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload
bandwidth per baby unit
Requirements
Str angu lat io n
Haz ar d
Keep this cord out of reach of children. The cord nee ds to be at lea s t three feet
away from the child at all times . Do not
use with an extens ion cord. Do not
remov e this ta g.
Éloignez ce cordon de s e nfants. Le
cordon doit se trouve r à a u moin s tr ois
pieds d’un enfant et ce, en tout temps. N’utilisez pa s de rallonge. Ne retirez pas
cette ét iquette.
Mantenga es te cable fuera de la alcance de los niños . Est e cable de be es ta r por
lo menos tr es pies fuera de la alcance del niño en todo m om ento . No lo use
con una extens ión ina lámbr ica. No quite
es ta et iqueta .
Ri s qu e
d’é tra n gl em e n t
Ri es g o d e
e str a ng u la ci ón
Parent Unit
Parent Unit adapter
(Output: 5V 2A)
Baby Unit
Baby Unit adapter
(Output: 5V 1.5A)
Extension cable
Mounting template
mount the baby unit
Install the Baby Unit onto the First extension, and connect the adapter to the end of the cable
and the power supply to power up the Baby Unit.
Install and power on the baby unit
Slide the switch to to power ON
your Baby Unit on.
• When powering up, the Baby Unit’s
status LED turns on. It will turn off
after a while and remains off.
• The status LED is set to off by default.
NOTE:
Camera lens and surface
may get warm during
normal operation.
WARM
WARM
WARM
WARM
WARM
Connect, charge and power on the parent unit
Connect the baby monitor
• The rechargeable battery in the parent unit is built-in.
• Use only the power adapters supplied with this product.
• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.
• Connect the power adapters in a vertical or floor mount position only. The adapter prongs are not
designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,
under-the-table, or cabinet outlets. Otherwise, the adapter may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
Charge the parent unit battery before use
The parent unit runs on an internal rechargeable battery or AC power. To continuously monitor
your baby, keep the parent unit connected to AC power.
• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the
parent unit battery is fully charged, the battery icon segments are solid .
• The standby time varies depending on your actual use.
The parent unit turns on automatically after connecting to the power socket, and the welcome screen
appears. You can press Power to turn the parent unit on or press and hold to turn it off.
Raise the parent unit
antenna for better
reception
A
Mounting: second extension Extension cover
Mounting cover
Cable cover
End cable cover Cable cover screws
and anchors (wall plugs)
x 3 x 3 x 6 x 6
Wall mount screws
and anchors (wall plugs)
(inside bag with label) (inside bag with label)
H I
Mounting bracket
( )attach to wall part
C
B
D
E
F
G
x 6
1. Insert the First extension (A) onto the Second
extension (B), aligning the slot in between. Make
sure the DC socket is out on opening of the
Second extension and ready for connection.
Cautions:
• Wall mount should be 1m above the bed sheet level or baby, and 1.7m
above the floor. You can use the mounting template (a paper ruler) for
measurement.
• Wall mount should install on the long side of the bed.
A
B
2. Insert the Second extension (B) onto
the Mounting cover (D).
B
D
3. Let the cable jack of the Extension cable pass through from the back of
the Mounting cover (D), to the opening of the Second extension (B).
B
D
Install the wall mount
Scan QR code to
watch wall mount
installation video.
6. Insert 3 plastic screw anchors (H) into the
pre-drilled holes, then insert the screws
(H) into the wall anchors. Tighten the
screws until only 1/4 inch of the screws are
exposed.
Then, attach the Mounting bracket (E) onto
the wall.
C
4. Connect the cable jack with the DC socket, then secure the cable with the Extension
cover (C).
5. Use Mounting template to measure the
location of the wall mount, and to mark the 3
holes for the screws.
Then, drill three holes on the wall (7/32 inch
drill bit).
3ft ( )1m
Center of the crib (long side)
E
H
Up side, to attach the
Mounting cover
8. Install the Cable covers (F) to prevent baby
from touching the cable.
Utilize the adhesive tape on the back of
the cable cover to stick the covers onto the
wall, or alternatively screw (I) the covers
onto the wall.
7. Place the Mounting cover (D) on the Mounting
bracket (E), and then slide it downward until it
locks into place.
E
D
1
2
F
I
G
F
9. Install the End cable cover (G to F) at last.
The wall mount setup
is completed!
OR
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
and are displayed on
the screen;
The LED light flashes.
The battery has very little
charge and may be used
for only a short time.
Charge
without interruption
(about 30 minutes).
The battery icon segments are
solid .
The battery is fully
charged.
To keep the battery charged,
connect it to AC power
when in use.
Quick start guide
Install MyVTech Baby Plus mobile app
1. Browse the App Store or the Google Play store .
2. Search for the mobile app with the keyword “myvtech baby plus“.
3. Download and install the MyVTech Baby Plus mobile app to your mobile device.
OR
Scan the QR codes on the right to get the app.
• Make sure your mobile device meets the minimum
requirement for the mobile app.
Minimum requirement
The mobile app is compatible with:
• AndroidTM 6.0 or later; and
• iOS 12 or later.
Download the free MyVTech Baby Plus mobile app and install it to a
mobile device, then use your mobile device and the mobile app to
monitor your baby remotely.
1. Press MENU/SELECT when the parent unit is idle.
2. Go to > Connect Mobile Phone.
3. Scan the QR code in the parent unit to download the app into your
mobile device if you have not installed the app yet.
4. Follow the instructions in the mobile app to set up and pair your baby
unit to the mobile app.
Alternatively, you can download the mobile app from the App Store or
Google Play store.
1
Download app for mobile access
After installing the mobile app, follow the instructions in the mobile app and parent
unit to set up and pair your baby unit.
In your mobile device:
1. Tap
P
L
U
S
to run the mobile app in your mobile device, and then create a user account.
2. We recommend that you use common webmail services, such as Google Gmail for
registration of your user account. Check your email (and Spam folder), and activate
your new camera account via the email link, then sign in to your account.
3. Follow the instructions in the mobile app to pair the camera. Tap , then Add Camera
in the mobile app to get started.
2
P
L
U
S
• To keep this product working well and looking good, follow these guidelines:
• Avoid placing it near heating appliances and devices that generate electrical noise (for example,
motors or fluorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft damp cloth.
• DO NOT immerse the parent unit and the baby unit in water and do not clean under running water.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the parent unit and the baby unit are dry before you connect them to the mains again.
When you are not going to use the video monitor for some time, store the parent unit, the baby unit
and the power adapters in a cool, dry location.
Below are the questions most frequently asked about the video monitor.
Can I turn the parent
unit display screen
off but keep hearing
sounds from the baby
unit?
Yes, press | LCD ON/OFF on the parent unit to turn off the screen. The parent
unit display will also dim automatically after being inactive for some time. In both
instances, you will still be able to hear all sounds from the baby unit.
Press any key to turn the screen back on.
Why is the baby
unit not responding
normally?
Try the following (in the order listed) for a common cure:
1. Disconnect the power to the baby unit.
2. Wait a few minutes before connecting power back to the baby unit.
3. Reboot the parent unit.
Why is my screen in
black and white?
The baby unit has a light sensor that measures ambient light. When the
ambient light is dim, such as during night time or in a dark room, the baby unit
activates its infrared LEDs, and displays the camera images in black and white
night vision.
Why does my baby unit
show offline? Why is the
connection lost every
now and then?
The baby unit may have lost connection to the Wi-Fi router. Check your
network and router settings.
Other electronic products may cause interference with your baby unit. Try
installing your baby unit as far away from these electronic devices as possible.
Why can’t I hear a
sound/Why can’t I hear
my baby crying?
The parent unit speaker volume may be too low. Press on the parent unit
to increase the volume.
You may have set a low sound sensitivity level. Set the sound sensitivity to a
higher level.
Frequently asked questions
General product care
Storage
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the
holder of a valid proof of purchase (“Consumer” or “you”)
that the Product and all accessories provided in the sales
package (“Product”) are free from defects in material
and workmanship, pursuant to the following terms and
conditions, when installed and used normally and in
accordance with the Product operating instructions. This
limited warranty extends only to the Consumer for Products
purchased and used in the United States of America and
Canada.
What will VTech do if the Product is not free from defects
in materials and workmanship during the limited warranty
period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service
representative will replace at VTech’s option, without charge,
a Materially Defective Product. If we choose to replace
the Product, we may replace it with a new or refurbished
Product of the same or similar design. We will retain
defective parts, modules, or equipment. Replacement of the
Product, at VTech’s option, is your exclusive remedy. VTech
will return the replacement Products to you in working
condition. You should expect the replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE
(1) YEAR from the date of purchase (90 days on products
purchased as Refurbished*). This limited warranty also
applies to the replacement Product for a period of either (a)
90 days from the date the replacement Product is shipped
to you or (b) the time remaining on the original one-year
warranty (90-day limited warranty on products that are
purchased as Refurbished*); whichever is longer.
*Refurbished products purchased from our online store
carry a 90-day replacement warranty.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident,
shipping or other physical damage, improper installation,
abnormal operation or handling, neglect, inundation, fire,
water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration
or modification by anyone other than an authorized
service representative of VTech; or
3. Product to the extent that the problem experienced is
caused by signal conditions, network reliability, or cable or
antenna systems; or
4. Product to the extent that the problem is caused by use
with non-VTech accessories; or
5. Product whose warranty/quality stickers, product serial
number plates or electronic serial numbers have been
removed, altered or rendered illegible; or
6. Product purchased, used, serviced, or shipped for repair
from outside the United States of America or Canada, or
used for commercial or institutional purposes (including
but not limited to Products used for rental purposes); or
7. Product returned without a valid proof of purchase (see
item 2 below); or
8. Charges for installation or set up, adjustment of customer
controls, and installation or repair of systems outside the
unit.
How do you get warranty service?
To obtain warranty service in the USA, please visit our
website at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s
manual - a check of the Product’s controls and features may
save you a service call.
Except as provided by applicable law, you assume the risk
of loss or damage during transit and transportation and are
responsible for delivery or handling charges incurred in the
transport of the Product(s) to the service location. VTech
will return replaced Product under this limited warranty.
Transportation, delivery or handling charges are prepaid.
VTech assumes no risk for damage or loss of the Product in
transit.
What must you return with the Product to get warranty
service?
1. Return the entire original package and contents including
the Product to the VTech service location along with a
description of the malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales receipt)
identifying the Product purchased (Product model) and
the date of purchase or receipt; and
3. Provide your name, complete and correct mailing
address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement
between you and VTech. It supersedes all other written or
oral communications related to this Product. VTech provides
no other warranties for this Product. The warranty exclusively
describes all of VTech’s responsibilities regarding the Product.
There are no other express warranties. No one is authorized
to make modifications to this limited warranty and you should
not rely on any such modification. State/Provincial Law Rights:
This warranty gives you specific legal rights, and you may also
have other rights, which vary from state to state or province
to province.
Limitations: Implied warranties, including those of fitness
for a particular purpose and merchantability (an unwritten
warranty that the Product is fit for ordinary use) are limited
to one year from the date of purchase. Some states/
provinces do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
In no event shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages (including,
but not limited to lost profits or revenue, inability to use
the Product or other associated equipment, the cost of
substitute equipment, and claims by third parties) resulting
from the use of this Product. Some states/provinces
do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion
may not apply to you.
Please retain your original sales receipt as proof
of purchase.
Limited warranty
FCC and IC regulations
FCC Part 15
NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of
the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a
user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC
criteria. The baby unit shall be installed and used such that parts of all persons’ body are maintained at a distance of approximately 8 in
(20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face.
This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
Industry Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must
accept any interference, including interference that may cause undesired operation of the device.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
RF radiation exposure statement
The product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The baby unit should be
installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons’ body. Use of other accessories
may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect
to Canada’s Health Code 6 for Exposure of Humans to RF Fields.
The RBRC seal on the lithium-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an
industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within
the United States and Canada. The program provides a convenient alternative to placing used lithium-ion batteries into
the trash or municipal waste, which may be illegal in your area.
VTech’s participation makes it easy for you to drop off the spent product at local retailers participating in the program
or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information on Li-ion battery recycling and disposal
bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and
conserving natural resources.
The RBRC Seal and 1 (800) 8 BATTERY
® are registered trademarks of Call2recycle, Inc.
The RBRC seal
To ensure that your HD video monitor is always at its best performance, the Parent Unit
will prompt a message and ask you to update its software and the Baby Unit’s firmware
when there are new versions available. Select “Now” to reboot the system, or switch off
and on the Parent Unit later to reboot the system into the latest software.
• To check if your device is running on the latest software, or to update your device
software, go to:
> > Software Update.
Connect your HD video monitor with home Wi-Fi network
You must connect your video monitor to your secured home Wi-Fi network in order to
receive the latest software and firmware updates. To set the Wi-Fi up, go to:
> > Congure Wi-Fi.
• Make sure the Baby Unit is on when you set up the Wi-Fi network.
Auto software and rmware update
Basic operation
Talk to your baby via the baby unit
1. Press and hold the TALK key.
2. When the icon displays on
screen, speak to your parent unit.
Your voice is transmitted to the
baby unit.
3. When finished talking, release
the key to hear your baby TALK
again.
Zoom
Press to zoom in or out in a fixed zoom
sequence. indicates the image is
magnified 2 times.
Adjust speaker volume
Press | to adjust the parent unit
speaker volume level received from the
baby unit.
After powering up your baby monitor, the parent unit streams live video in direct mode.
We recommend you follow the instructions on-screen to set up home Wi-Fi network
with your monitor for functionality enhancements and mobile access. See Auto software
and rmware update and Download app for mobile access in this Quick Start Guide.
Use the menu
Press on the parent unit to enter the MENU
main menu, choose a menu item, or save a
setting. You can use the parent unit menu
for advanced settings or operations, such
as to play or stop the baby unit lullaby, or
adjust the baby unit sound sensitivity.
While in the menu:
• Press | | | to scroll through the
menu options.
• Press SELECT to select an item.
• Press TALK to return to the live video.
• Press page. to go to the Help & info
To restore to the default settings or reset the
Wi-Fi connection, you can reset the parent unit
by pressing the RESET key at the back of the unit.
Insert a pin into the hole on the back of RESET
the parent unit, and then gently press the button
inside.
Turn on/off the parent unit screen
You can turn on or turn off the parent unit
screen without powering off the unit. You
will still hear sounds from the baby unit.
• Press | LCD ON/OFF on the parent unit
to turn off the screen.
• Press any key on the parent unit to turn
the screen on again.
Muted
Press and hold
VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-
recommended best practices to help keep your wireless connection private and your devices protected when
online. We recommend you carefully review and consider complying with the following tips.
Ensure your wireless connection is secure.
• Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK
with AES” setting in your router’s wireless security menu.
Change default settings.
• Change your wireless router’s default wireless network name (SSID) to something unique.
• Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.
Keep your devices up to date.
• Download security patches from manufacturers as soon as they become available. This will ensure you
always have the latest security updates.
• If the feature is available, enable automatic updates for future releases.
Disable Universal Plug and Play (UPnP) on your router.
• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices
to open inbound ports without any intervention or approval from you. A virus or other malware program
could use this function to compromise security for the entire network.
For more information on wireless connections and protecting your data, please review the following
resources from industry experts:
1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips –
www.fcc.gov/consumers/guides/how-protect-yourself-online.
2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet –
www.us-cert.gov/ncas/tips/ST15-003.
3. Federal Trade Commission: Using IP Cameras Safely –
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.
4. Wi-Fi Alliance: Discover Wi-Fi Security –
http://www.wi-fi.org/discover-wi-fi/security.
Protect your privacy and online security
Need help?
Use your smartphone or mobile device to access our online help.
• Go to https://phones.vtechcanada.com/manuals; OR
• Scan the QR code on the right. Launch the camera app or
QR code scanner app on your smartphone or tablet. Hold
the device’s camera up to the QR code and frame it. Tap the
notification to be redirected to the online help page.
- If the QR code is not clearly displayed, adjust your
camera’s focus by moving your device closer or
further away until it is clear.
• Search for the model - VC2105
You can also call our Customer Support at 1 (800) 267-7377 for help.
For operations and guides to help you use your video monitor, and for the
latest information and support, check out our online help topics and online
FAQs.
CABLE MANAGEMENT
1 2 3
Overview
Baby unit overview
1Light sensor
2Camera lens
3Microphone
4Infrared LEDs
• Allow you to see clearly in a dark environment.
5Speaker
6LED indicator
• Steadily on, then off, when the Baby Unit is
connected to the Parent Unit.
7 ON/OFF switch
• Power it on or off.
8Night light
9 Link
• Reserve for pairing the Parent Unit.
10 Night light switch
• Press to turn the night light on or off.
11 Power connector
Parent unit overview
1LINK LED light
• On when the parent unit is linked to the
baby unit.
• Flashes when the link to the baby unit
is lost.
2 LED light
• On when the parent unit is connected to
AC power, and the battery is charging.
• Flashes when the parent unit battery is
low and needs to be charged.
33- level sound indicator light
• Green: low sound level is detected by
the baby unit.
• Green and amber: moderate sound
level is detected by the baby unit.
• Green, amber and red: high sound level
is detected by the baby unit.
4TALK /
• Press and hold to talk to the baby unit.
• While in a sub-menu, press to return to
the previous menu.
5MENU | SELECT
• Press to enter the main menu.
• While in a menu, press to choose an
item, or save a setting.
6 | | | Arrow keys
• Press to navigate left, right, up and
down within the main and sub-menus.
• While viewing a zoomed image, press
to move the viewed image left, right,
up and down.
7Microphone
8 |
• Increase or decrease parent unit
volume.
9 Zoom
• Press to zoom in/out.
• While in a sub-menu, press to view the
help menu.
10 Power | LCD ON/OFF
11 Antenna
12 Speaker
13 Power jack
14 RESET
• Force reboot the parent unit.
15 Stand
2
1
3
4
5
6
7
8
9
10
14
15
13
12
11
3
4
1
2
11
6
7
5
89
10
Direct mode
Your baby monitor parent unit and baby unit connect to each other in Direct mode by default,
which allows you to immediately stream video out of the box.
It is NOT recommended to continue using Direct Mode connection after initial installation.
You may experience reduced signal
strength if your parent unit and baby unit
are far apart, or there are obstructing
factors, such as internal walls, between
them. Move the parent unit closer to the
baby unit to improve the signal strength.
Router mode
You are required to set up your
monitor in Router mode to enjoy live
video streaming via your parent unit
with an enhanced connection. Router
mode is the recommended mode for
stable connectivity.
Router mode uses your home Wi-
Fi network to connect your video
monitor. It supports live video
streaming through the parent unit and
smartphone app.
If you want to stream live video
remotely with your mobile device,
download and install the MyVTech
Baby Plus mobile app. With the
mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video
monitor system. It serves as a communicating channel between your baby unit and mobile
device, allowing you to monitor and/or control your baby unit wherever you are. For more
details, see Download app for mobile access section in this quick start guide.
• When both parent unit and app are viewing the camera simultaneously,
the video quality will be optimised to deliver the best possible viewing result.
How the system works
For better security and more stable connectivity, this baby monitor requires
connecting to a Wi-Fi network and operating in Router mode connection.
Local access, for
start up quick view
and setup stage.
Mobile access
Connecting Wi-Fi to
enhance local access
P
L
U
S
Parent unit icons
Main
Menu
Sub-
menu Options
Night light
• Turn on or turn off night
light.
• Select a night light color.
• Adjust night light
brightness.
• Set the brightness to
Auto adaptive ambience.
• Set the timer to turn off
night light after 15, 30 or
60 minutes, or remain on
always.
Melodies and soothing sounds
• Play or stop.
• Select to play all
melodies, or play one of
the five melodies or five
soothing sounds.
• Set the timer to stop
playing after 15, 30 or 60
minutes, or play non-stop.
• Adjust the play volume
level.
General settings
• Connect to home Wi-Fi
network.
• Connect mobile phone.
• Adjust Baby Unit speaker
volume.
• Adjust Parent Unit screen
brightness.
• Turn the screen off timer
on/off, set to screen off
after 1, 3 or 5 minutes,
or auto screen on when
sound detected.
• Set Sound Sensitivity
Level for auto screen on.
Main
Menu
Sub-
menu Options
• Change temperature
display format.
• Mute or adjust
notifications volume
level.
• Turn on/off low battery
notification.
• Turn on/off no link
notification.
• Reset settings, software
update.
Alerts Settings
• Adjust alerts volume
level.
• Select maximum and
minimum temperature
for alert range;
• Turn on/off temperature
detection alert.
• Adjust Motion Sensitivity
Level to activate parent
unit screen and speaker.
• Turn on/off motion
detection alert.
• Turn on/off cry alert.
• Turn on/off face covered
alert.
Help and info
• Support Information
• System Information
Status icons
Direct mode
The parent unit and baby unit
connect to each other directly.
Red bars indicate no connection.
Router mode
The parent unit and baby unit
connect via the home Wi-Fi network.
The red icon(s) on the baby unit or
parent unit, indicates no connection
between the respective unit(s) and
the router.
Night vision is turned on.
Motion detection alert is turned on.
Cry alert is turned on.
Face covered alert is turned on.
Melodies and soothing sounds are
playing.
Night light is turned on.
Auto night light brightness is activated.
Temperature alert is turned on.
Parent unit is muted.
Humidity
Temperature
Battery level indicator
Low battery indicator
Tuotetiedot
| Merkki: | VTech |
| Kategoria: | Itkuhälytin |
| Malli: | VC2105 |
Tarvitsetko apua?
Jos tarvitset apua merkille VTech VC2105 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Itkuhälytin VTech Käyttöohjeet
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
Itkuhälytin Käyttöohjeet
- Itkuhälytin Denver
- Itkuhälytin D-Link
- Itkuhälytin Kogan
- Itkuhälytin Uniden
- Itkuhälytin Lionelo
- Itkuhälytin Alecto
- Itkuhälytin Oricom
- Itkuhälytin Neonate
Viimeisimmät Itkuhälytin Käyttöohjeet
5 Joulukuuta 2024
23 Lokakuuta 2024
22 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
20 Lokakuuta 2024
17 Lokakuuta 2024
17 Lokakuuta 2024
17 Lokakuuta 2024