Whirlpool ARG 18411 A++ Käyttöohje

Whirlpool Ei luokiteltu ARG 18411 A++

Lue alta 📖 käyttöohje suomeksi merkille Whirlpool ARG 18411 A++ (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
CONTROL PANEL
6. 5. 4.
1. 2. 3. 1. On/Stand-by
2. Temperature display
3. Key lock
4. Turning o the sound alarm
5. Appliance temperature
6. Vacation (holiday mode)
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. In
Stand-by mode, the icon will light up and the light in the refrigerator
compartment does not turn on.
To turn the product on again, a brief press on the button is sucient.
Note: this procedure does not disconnect the appliance from the
electricity supply.
TEMPERATURE DISPLAY
The display shows the refrigerator compartment temperature
(between 2°C and C).
To avoid food waste, please refer to the recommended setting and storage
times found in the online user manual.
KEY LOCK
The key lock can be activated/deactivated by keeping the
button ressed for 3 seconds, until a conrmation sound is heard (the
icon lights up immediatly and into few seconds disappear). If you press
any button while the key lock is active, you will hear a sound and the
icon will ash.
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the button.
APPLIANCE TEMPERATURE
It is possible to set a dierent temperature with the °C button.
Fast Freeze/Cool Function (Fast Cooling)
To quickly cool the refrigerator compartment, or six hours before
putting a large quantity of food to be frozen in the freezer
compartment (if there is one), turn on the “Fast Cooling” function by
pressing the button for 3 seconds.
When the function is turned on, the icon will be displayed. The
function turns o automatically after 6 hours, or manually by pressing
the button for 3 seconds.
Note: do not put foods that are to be frozen in contact with others that are
already frozen.
Recommended setting: - 1C
VACATION HOLIDAY MODE
You can use this function in the event of your prolonged
absence.
Press the button for 3 seconds to turn the function n.
“Vacation”
The display will show the temperature of the refrigerator compartment
(12°C) and the icon will light up. After activating the function,
remove the food from the appliance and keep the door closed - the
appliance will maintain a suitable temperature to prevent odours from
forming.
To turn o the function, press briey the button or act on the °C button
.
* Available only on certain models
* Available only on certain models
HOW TO STORE FRESH FOOD AND BEVERAGES
**
c
** For models
with "0 ° ZONE"
COMPARTMENT
the "coolest
area" is the one
highlighted in
the legend
*
Legend
TEMPERATE ZONE
Suggested for storage of tropical fruit, cans, drink, eggs,
sauces, pickles, butter, jam
COOL ZONE
Suggested for storage of cheese, milk, daily food,
delicatessen, yoghurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
sh
FRUIT & VEGETABLE DRAWER
REFRIGERATOR COMPARTMENT
“0° Zone” compartment*
The “ ” compartment is specically designed to maintain a low
0°ZONE
temperature and the correct humidity to preserve fresh food for longer
(for example, meat, sh, fruits and winter vegetables).
Humidity control technology coupled with Active0 provides the best
food preservation when the food is not completely packed.
Turning on and turning o the compartment
The internal temperature of the compartment is approximately 0°
when the compartment is turned on.
To turn on the compartment, press the button (1) for more than one
second until the symbol (2) lights up. The lit symbol (2) means that the
compartment is working. Press the button (1) again for more than one
second to turn o the compartment. The temperature inside depends
on the general temperature of the refrigerator.
1
2
.
.
For the correct functioning of the ” compartment, it is 0°ZONE
necessary that:
the appliance is turned on;
the fridge temperature is between +2°C and +6°C;
the “0°ZONE compartment is turned on
Vacation Mode and Stand by are not selected
Note:
-if the symbol does not light up when you turn on the compartment,
check that the drawer is properly inserted; if the problem persists
contact the authorised Technical Assistance Service;
-when the 0°ZONE” compartment is inserted in the appliance you
may hear a faint noise, which you should consider as normal;
Important: be careful when positioning food and containers that are
small in size on the upper shelf of the “ compartment in order
0°ZONE
to prevent them accidentally falling between the shelf and the back
wall of the refrigerator compartment.
Removing the “0° zone“ compartment
Carry out the following steps:
1. To make it easier to remove the compartment, we recommend
that you empty (and possibly remove) the lower door shelves.
2. Remove the compartment by rotating it upwards.
3. Remove the white plastic shelf under the compartment.
Note: it is not possible to remove the upper shelf and side supports.
To use the “0° ZONE compartment again, carefully reposition the
white plastic shelf under the compartment before inserting the drawer
and turning the function back on.
To have a larger refrigerator volume and to reduce energy
consumption, it is recommended to remove the “
0°ZONE
compartment.
Clean the compartment and its components occasionally using a cloth
and a solution of warm water (taking care not to submerge the white
plastic shelf under the drawer) and neutral cleaning agents specically
for cleaning the inside of the refrigerator. Do not use abrasive cleaning
agents.
Before cleaning the compartment (also externally) it is necessary
to remove the drawer to disconnect the electrical supply.
Fan*
The fan is pre-set to ON.
You can turn the fan on/o by pressing the button at button and
the same time for 3 seconds.
The lit icon indicates that the fan is on and therefore the ProFresh
function is on. If the ambient temperature exceeds 27°C, or if drops of
water are present on the glass shelves, it is essential that the fan is on
to ensure the proper preservation of the food. Deactivation of the fan
allows energy consumption to be optimised.
Note: the fan restarts automatically after a power cut or after turning o the
appliance.
Antibacterial lter*
Remove it from the box placed in the Fruit and vegetable drawer and
insert into the cover of fan. The replacement procedure is included in
the lter box.
Light system (depending on model)
This product contains a light source of energy
eciency class G
This product contains 4 lateral light sources of
energy eciency class F
This product contains a light source of energy
eciency class G
This product contains 4 lateral light sources of
energy eciency class F and a top light source
of energy class G
This product contains a top light source of
energy eciency class G
FREEZER COMPARTMENT
Freezing fresh food
1. It is advisable to set the temperature colder or turn on the Fast Freeze/
Fast Cool* at least four hours before removing the food from the
freezer compartment, to prolong the preservation of the food during
the defrosting phase.
2. To defrost, unplug the appliance and remove the drawers. Leave
the door open to allow the frost to melt. To prevent the water from
escaping during the defrost, it is advised that you place an absorbent
cloth on the bottom of the freezer compartment and wring it out
regularly.
3. Clean the inside of the freezer compartment and dry it carefully.
4. Turn the appliance back on and put the food back inside. To remove
the frost on the STOP FROST* accessory, follow the CLEANING.
Ice cubes*
Fill 2/3 of the ice tray with water and put it back in the freezer
compartment. Do not, under any circumstances, use sharp or pointed
objects to remove the ice.
The quantity of fresh food that can be frozen in a specic time period is
indicated on the rating plate.
Load limits are determined by baskets, aps, drawers, shelves etc. Make
sure that these components can still close easily after loading.
GENERAL INFORMATION
The drawers, baskets and shelves should be kept in their current position
unless otherwise specied in this quick guide. The light system inside the
refrigerator compartment uses LED lights, allowing for better lighting than
with traditional light bulbs, as well as for very low energy consumption.
Doors and lids of the refrigeration appliance should be removed before
disposal in the landll, to avoid children or animals getting trapped inside.
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
The appliance may be in On / Stand-by
mode.
There may be an appliance power
supply problem.
Turn the appliance on pressing the On/Stand-by button. Check that:
there is not a power outage;
the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
the household electrical system protection devices are ecient;
the power cable is not damaged.
The inside light does not
work.
The light may need to be replace. Models with LED lights: contact the authorised Technical Assistance
Service.
The appliance may be in On / Stand-by
mode.
Turn the appliance on pressing the On/Stand-by button.
The temperature inside the
compartments is not low
enough.
There could be various causes (see
“Solutions”).
Check that:
the doors close properly;
the appliance is not installed near a heat source;
the set temperature is adequate;
the circulation of air through the ventilation of the appliance is
ensured.
* Available only on certain models

Tuotetiedot

Merkki: Whirlpool
Kategoria: Ei luokiteltu
Malli: ARG 18411 A++

Tarvitsetko apua?

Jos tarvitset apua merkille Whirlpool ARG 18411 A++ esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Whirlpool Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet