WilTec 50297 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille WilTec 50297 (9 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/9
Operation Manual
Pond and Fountain Pumps
CTF-2800, CTF-3800, CTF-4800, CTF-5800,
CTF-5000, CTF-6000, CTF-7000, CTF-8000,
CTF-10000, CTF-12000, CTF-14000, CTF-16000,
CTF-1000B CTF-1200B CTF-1400B CTF-1600B, , ,
50286–50297, 50353–50356
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
© by WilTec Wildanger Technik GmbH Item 50286–50297, 50353–50356 Page 2
http://www.WilTec.de
http://www.aoyue.eu -1 07 2022
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
© by WilTec Wildanger Technik GmbH Item 50286–50297, 50353–50356 Page 3
http://www.WilTec.de
http://www.aoyue.eu -1 07 2022
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Security notes
ATTENTION:
In stagnant waters, garden ponds and swimming ponds and the surrounding areas the device can only
be used with a residual current circuit breaker and a triggering nominal current up to 30 mA (according
VDE 0100 part 702 and 738).
The device is not for use in swimming pools, any kind of paddle ponds and the like that are used by
humans during the operation of the device. Operating the device during the stay of humans in the danger
zone is not permitted. Ask your electrician!
The device must not be used by persons (including children) with reduced physical, sensory, or mental
capabilities and/or lack of experience or knowledge, unless they are instructed by a person responsible
for their safety or given instruction how to use the device.
ATTENTION:
Perform a visual inspection before each use of the device. Do not use the device if the safety
equipment is damaged or worn. Never override the safety equipment.
Only use the device for the purpose as specified in this manual.
You are held responsible for the safety in the work area.
If the power cord or the plug is damaged by external influences, the cord must not be repaired!
The cord must be replaced with a new one. This operation must be carried out only by a qualified
electrician.
The voltage of 230 V AC volts as indicated on the device nameplate must be according to the
mains voltage.
Never lift, transport, or fix the device by using the power cord as a means for this purpose.
Make sure that the electrical connectors are in a flood-safe area and that they are protected
from moisture.
Pull the power plug before working on the device.
As for the compliance with local safety and installation regulations the user is held responsible
(as the case may be, ask an electrician).
Consequential damage due to flooding caused by faults of the device is to be prevented by the
user who takes the appropriate measures therefor.
In case of a failure, the device may only be repaired by a qualified electrician.
The device must never run dry or be operated with the suction tube fully closed.
The device must not be used for the operation of swimming pools.
The device must not be installed in the portable water cycle.
WARNING:
Read all safety warnings and instructions. Any failure due to disrespect of the safety instructions may
result in electric shock, fire, and/or serious injury.
Keep all warnings and instructions for the future.

Tuotetiedot

Merkki: WilTec
Kategoria: Ei luokiteltu
Malli: 50297

Tarvitsetko apua?

Jos tarvitset apua merkille WilTec 50297 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu WilTec Käyttöohjeet

WilTec

WilTec 51024 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50179 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50185 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50314 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50947 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50378 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50201 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50312 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 55560 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50297 Käyttöohje

19 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet