WilTec 50947 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille WilTec 50947 (9 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/9
Operation Manual
3- -1 Filter -2500, CUF-5000, CUF-6000in CUF
50945, 50946, 50947
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
© by WilTec Wildanger Technik GmbH Item 50945–50947 Page 2
http://www.WilTec.de
http://www.aoyue.eu -1 08 2022
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
© by WilTec Wildanger Technik GmbH Item 50945–50947 Page 3
http://www.WilTec.de
http://www.aoyue.eu -1 08 2022
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
CAUTION:
On standing water, garden and swimming ponds and in their vicinity, the device may only be used with
a residual current circuit breaker with a rated current of up to (according to VDE 0100 parts 702 30 mA
and 738).
This device is not intended to be used by persons (including children) with limited physical, sensory, or
mental capabilities or lack of experience and/or knowledge, unless they are supervised or obtained from
a person responsible for their safety her instructions on how to use the device.
Children should be supervised to ensure that they do not play with the device.
ATTENTION:
Perform a visual inspection of the device before each use. Do not use the device if safety de-
vices are damaged or worn. Never override safety devices.
Only use the device in accordance with the intended use specified in these operating instruc-
tions.
You are responsible for the safety in the work area.
If the cable or the plug is damaged due to external influences, the cable must not be repaired!
It must be exchanged for a new one. This work may only be carried out by a qualified electrician.
The voltage of 230 V AC specified on the nameplate of the device must correspond to the ex-
isting mains voltage.
Never lift, transport, or fasten the device by the power cord.
Make sure that the electrical plug connections are protected from flood or moisture.
Pull the power plug before working on the device.
Avoid exposing the device to direct water jets.
The operator is responsible for compliance with location-specific safety and installation regula-
tions. If necessary, ask a qualified electrician.
The user must take appropriate measures to prevent consequential damage from flooding of
rooms in the event of malfunctions on the device (e.g., installation of an alarm system, standby
pump, etc.).
If the device fails, repairs may only be carried out by a qualified electrician.
The device must never run dry or be operated with the suction line fully closed. The manufac-
turer’s guarantee is void for damage to the device caused by running dry.
The device must not be used to operate swimming pools.
The device must not be installed in the drinking water circuit.
Set up the device so that it is not exposed to direct sunlight
Only operate the UV tube in a closed, unbroken housing.
WARNING:
Read all safety warnings and instructions. Failure to follow the safety instructions and instructions
could result in electric shock, fire, and/or serious injury.
Keep all safety notices and instructions for future use.

Tuotetiedot

Merkki: WilTec
Kategoria: Ei luokiteltu
Malli: 50947

Tarvitsetko apua?

Jos tarvitset apua merkille WilTec 50947 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu WilTec Käyttöohjeet

WilTec

WilTec 51024 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50179 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50185 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50314 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50947 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50378 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50201 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50312 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 55560 Käyttöohje

19 Lokakuuta 2024
WilTec

WilTec 50297 Käyttöohje

19 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet