Yamaha VC4NW Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Yamaha VC4NW (2 sivua) kategoriassa Kaiutin. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/2
1
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
This product is a speaker system designed for background music and public address
applications in places such as stores, restaurants and other commercial spaces.
Do not use for any purposes other than the one intended. Those who are
unfamiliar with handling or those who can not handle according to this manual,
should be supervised by responsible persons to ensure safety.
Always consult a professional installer if the product installation requires
construction work.
WARNING
Always follow the basic precautions listed
below to avoid the possibility of serious
injury or even death from electrical shock,
short-circuiting, damages, fire or other
hazards. These precautions include, but
are not limited to, the following:
If you notice any abnormality
• If any of the following problems occur,
immediately turn off the power of the amplifier.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped
into the product.
- There is a sudden loss of sound during use
of the product.
- Cracks or other visible damage appear on
the product.
Then have the product inspected or repaired
by qualified Yamaha service personnel.
Do not open
• This product contains no user-serviceable
parts. Do not attempt to disassemble the
internal parts or modify them in any way.
Water warning
• Do not expose the product to rain, use it near
water or in damp or wet conditions.
Fire warning
• Do not place any burning items or open flames
near the product, since they may cause a fire.
Hearing loss
• Before turning the power of all devices on or off,
make sure that all volume levels are set to the
minimum. Failing to do so may result in hearing
loss, electric shock, or device damage.
• When turning on the AC power in your audio
system, always turn on the power amplifier
LAST, to avoid hearing loss and speaker
damage. When turning the power off, the
power amplifier should be turned off FIRST for
the same reason.
Location and connection
• Always consult a professional installer if the
product installation requires construction work, and
make sure to observe the following precautions.
- Choose mounting hardware and an
installation location that can support the
weight of the product.
- Avoid locations that are exposed to constant
vibration.
- Use the required tools to install the product.
- Inspect the product periodically.
• Do not place the product in an unstable position
or a location with excessive vibration, where it
might accidentally fall down and cause injury.
CAUTION
Always follow the basic precautions listed
below to avoid the possibility of physical
injury to you or others. These precautions
include, but are not limited to, the following:
Location and connection
• Keep this product out of reach of children. This
product is not suitable for use in locations
where children are likely to be present.
• Do not place the product in a location where it
may come into contact with corrosive gases or
salt air. Doing so may result in malfunction.
• Do not place the product in a location where it
may be exposed to smoke or oil vapors, or
where any of its parts might deteriorate and
cause malfunction.
• Before moving the product, remove all
connected cables.
• Use only speaker cables for connecting
speakers to the speaker jacks. Use of other
types of cables may result in fire.
Handling caution
• Do not insert your fingers in any gaps or
openings on the product (clamps or moving
parts on the rails).
• Do not rest your weight on the product or place
heavy objects on it.
• When choosing a power amplifier for use with
this product, make sure that the output power
of the amplifier meets the following conditions:
- When using a low-impedance connection,
make sure that the output power of the
amplifier is lower than the power capacity of
this product.
- When using a high-impedance connection,
be sure that the total rating of the transformer
taps of the speakers does not exceed the
output power of the amplifier.
If the output power is not appropriate,
malfunction or fire may occur.
• Do not input excessively loud signals that may result
in clipping in the amplifier or cause the following:
- Feedback, when using a microphone
- Continuous and extremely loud sound from a
musical instrument, etc.
- Continuous and excessively loud distorted
sound
- Noise caused by plugging/unplugging the
cable while the amplifier is turned on
Even if the output power of the amplifier is
lower than the power capacity of this product
(program), damage to the product,
malfunction or fire may occur.
PA_en_12
General Specifications
Unpacking
Unpack the contents and confirm that
all the following items are included.
• Speaker × 1
• Grille × 1
• Safety wire × 1
• Cutout template × 1
• Owner’s Manual (this manual)
* Speaker cable is not included.
The following Reinforcing Bracket
Kit is included only with VC8NB,
VC8NW, VC6NB, VC6NW.
• Tile rails × 2
• C-ring × 1
• Screws (S-TITE M4, 8 mm) × 2
Optional Items (sold separately; VC4NB and VC4NW only)
Reinforcing Bracket Kit (AB-C2)
Bundled Items
• Tile rails × 2
• C-ring × 1
• Screws (S-TITE M4, 8 mm) × 2
* In this manual, the installation method using the AB-C2 Reinforcing Bracket Kit
is also explained.
Material and weight of the Reinforcing Bracket Kit (AB-C2): steel, 1.0 kg
*1 : Half-space (2π)
*2 : Calculated based on power rating and sensitivity
The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download
the manual file.
The dimensions are shown in “Dimensions” on the back side of the manual.
VC4NB VC4NW VC6NB VC6NW VC8NB VC8NW
System Type 2-way coaxial type (without back can)
Components HF 0.8" film dome 0.8" soft dome 1" soft dome
LF 4" (10 cm) cone 6.5" (16 cm) cone 8" (20 cm) cone
Nominal Impedance 16 Ω
Frequency Range *1 (-10 dB) 85 Hz - 20 kHz 63 Hz - 20 kHz 52 Hz - 20 kHz
Coverage Angle *1 160° conical 120° conical 110° conical
Power Rating NOISE 15 W 25 W 25 W
PGM 30 W 50 W 50 W
MAX 60 W 100 W 100 W
Sensitivity *1 (1 W, 1 m) 88 dB SPL 89 dB SPL 91 dB SPL
Maximum SPL *2 (Calculated, 1 m,
Peak) 106 dB SPL 109 dB SPL 111 dB SPL
Transformer Taps 100 V 1.5/3/6 W 3/6/12 W 3/6/12 W
70 V 0.8/1.5/3/6 W 1.5/3/6/12 W 1.5/3/6/12 W
Overload Protection Full-range power limiting to protect network and transducers
Connector Push terminal (WAGO 294 /2 pin) × 1
Wire size: Solid conductor min. AWG18 (0.75 sq), max. AWG12 (3.5 sq)
Standard conductor min. AWG18 (0.75 sq), max. AWG14 (2 sq)
Baffle PP, black
Grille Metal Grille Punching metal, Powder coating
black (Munsell N3) / white (Munsell N9.3)
Trim Ring ABS, black (Munsell N3) / white (N9.3)
Dust-proof bag Artificial fiber, black
Dimensions (Including grille) Ø225 × D103 mm Ø286 × D114 mm Ø325 × D131 mm
Weight (Including grille) 1.4 kg 2.3 kg 2.8 kg
Cutout size Ø186 mm Ø247 mm Ø285 mm
Required ceiling board thickness 2 mm - 37 mm
Conduit tube Ø15.4 mm - Ø21.3 mm
Packaging 1 pc
Included in the
package
Grille, Safety wire, Cutout template, Owner's Manual
Reinforcing
Bracket Kit – C-Ring, Tile Rails × 2 C-Ring, Tile Rails × 2
Optional accessories AB-C2 – –
Installing the Speaker
Before installing the speaker onto the ceiling, ensure that the strength of the
ceiling rail is sufficient.
Pre-installation (Preparation of the Cable)
• For cables attached to the spring type connector, strip the insulation as
shown in the figure and connect them.
1.
Put the supplied cutout template to the ceiling and draw a circle by tracing it.
Make sure to use the cutout template so that hole is the correct diameter.
If you use a circular cutter, set the diameter using the cutout template.
2. Cut the hole by tracing the circle.
1.
Pull the wiring from the power amplifier through the cut hole of the ceiling.
2. Insert the cable into each terminal.
Insert the cable while holding the lever, and when fully inserted, release
your finger from the lever to securely connect.
(Lever operation is not required for solid core wire.)
Make sure that the cables cannot be pulled out.
NOTE
The example illustrations in this manual are of the VC4NB.
CAUTION
Be careful not to hurt your hands when handling this product.
NOTICE
When installing the speakers, turn off the power amplifier.
NOTE
Do not plate core wires by soldering if the cable uses stranded wire.
Doing so will cause the wire to break.
Cut Out a Hole in the Ceiling
CAUTION
Wear goggles to prevent chips or powder entering your eyes
while cutting the hole.
When the included Reinforcing Bracket Kit or AB-C2 (sold
separately) is used
For the VC8NB, VC8NW, VC6NB, and VC6NW, the included
Reinforcing Bracket Kit must be used.
For the VC4NB and VC4NW, follow the instructions when using the AB-
C2.
1. Insert the two tile rails through the cut hole and place them on the
ceiling surface within your reach. Adjust their length and be sure that
each of the tile rails are oriented as shown below.
2. Use the opening in the C-ring to slide one section of the C-Ring into
the cut hole, continuing to slide it around until the C-ring is
completely inside the ceiling.
3. Secure the C-ring and tile rails with the supplied two screws through
either slot of both C-ring brackets.
About 8-9 mm
Compatible cable:
Min. AWG18 (0.75 sq)
Max. AWG12 (3.5 sq) for solid core wire/
AWG14 (2 sq) for stranded wire
1
C-ring
C-ring
Tile rail
Connect the Wiring to the Connector
2
Cable
Spring type
terminal
Safety wire
The dust-proof bag has notches at the
spring type terminal and a safety wire so
that you can work with the dust-proof
cover attached.
From amplifier or
previous speakers
To subsequent speakers
Spring type terminal
While holding down lever...
Insert cables Release lever
1. From the hole on the top of the dust-proof cover, attach the safety wire
to the safety wire ring, and connect the wire to an independent support
point, such as a joist.
2. Push the speaker slowly up into the ceiling, taking care not to trap the
speaker cable or safety wire.
3. While lifting up the speaker, turn the screwdriver clockwise to tighten the
attachment screw.
The first turn of the attachment screw opens the clamp. Further turns
move the clamp down the channel to pull the speaker up into the ceiling.
When the clamp is difficult to open, turning the screwdriver halfway
counterclockwise once will make it easier to open the clamp.
Select the line voltage/impedance (100 V, 70 V, 16 Ω) and power tap for a
100 V, 70 V line distributed system, by rotating the tap selector switch on
the front side of the speaker with a flat-blade screwdriver.
When using the speaker with high-impedance connection, select the
position where wattage is indicated by the line (100 V, 70 V). Do not select
the “ × ” setting when connecting to a 100 V line.
When using it with low impedance connection, select the 16 Ω position.
1. Align the grille with the cabinet’s
face and fit them together.
2. Turn clockwise (approx. 30°) to
secure the grille.
Fix the Speaker onto the Ceiling
CAUTION
Always take measures to prevent the speaker from falling
down.
If the safety wire is too short, prepare another wire appropri-
ate for the speaker weight and installation conditions.
NOTICE
Do not over-tighten the attachment screws. Otherwise, the attachment
screws and clamps will break.
3
Safty wire ring
Safety wire
Safety wire
Speaker cable
Safety wire
Speaker cable
(VC4NB, VC4NW, VC6NB,
VC6NW, VC8NB, VC8NW)
When the included Reinforcing
Bracket Kit or AB-C2 (sold
separately; VC4NB and
VC4NW only) is used.
(VC4NB, VC4NW)
When the AB-C2 Reinforcing
Bracket Kit (sold separately)
is not used.
Attachment
screw
Clamp
Removing from the Ceiling
1. While pressing the speaker against the ceiling, loosen the
attachment screws by turning them counterclockwise.
Loosen the screw and the clamp goes up, and as it reaches the top,
the clamp closes as shown in figure below.
2. Remove the safety wire from the speaker that is detached from the
ceiling.
Set the Line Voltage/Impedance and Power
NOTICE
• Make sure the amplifier is switched off before operating the tap selector
switch.
• If the setting is incorrect, it may cause malfunction of the speaker and
amplifier.
Attach the Grille
CAUTION
• If the grille is not sufficiently turned, it may fall off. Sufficiently
turn the grille, until the fastening sections of the grille and
speaker are securely engaged.
• If the ceiling material is soft, the baffle surface may sink into
the ceiling material due to overtightening of the attachment
screws, and the grill may not fit properly.
Clamp
4
The illustration indicates the setting at 6 W for a
100 V line and 3 W for a 70 V line.
100V
1.5
3
6
X
X
16
T
A
P
S
E
L
E
C
T
O
R
70V
0.8
1.5
3
6
X
5
SPEAKER SYSTEM
VC8NB VC8NW VC6NB VC6NW VC4NB VC4NW
Owner’s Manual
EN
English
VEY4250
NOTICE
To avoid the possibility of malfunction/damage to
the product or damage to other property, follow
the notices below.
Handling and maintenance
• Do not expose the product to excessive dust or
vibration, or extreme cold or heat, in order to
prevent the possibility of panel disfiguration,
unstable operation, or damage to the internal
components.
• Be sure to observe the amplifier’s rated load
impedance, particularly when connecting
speakers in parallel at low impedance.
Connecting an impedance load outside the
amplifier's rated range can damage the
amplifier.
• When using a high-impedance speaker
connection, make sure the audio signal is
passed through an 60 Hz or above high-pass
filter before being input to the speakers.
• Do not touch the speaker driver unit, since it
might cause malfunction.
• Do not place vinyl, plastic or rubber objects on
the product, since this might cause alteration
or discoloration of the panel.
• When cleaning the product, use a dry and soft
cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated
wiping cloths, since this might cause alteration
or discoloration.
• Protection Circuit
This speaker system has an internal protection
circuit that shuts off the speaker unit when an
excessive input signal is applied. If the
speaker unit emits no sound, reduce the
volume level of the amplifier immediately. (The
sound will return automatically in several
seconds.)
• Do not place the speaker face down with the
grille attached, as deformation of the grille may
result.
• When placing the baffle face down, always
place it on a flat surface.
Information
About this manual
• The illustrations as shown in this manual are for
instructional purposes only.
• The company names and product names in
this manual are the trademarks or registered
trademarks of their respective companies.
About disposal
• This product contains recyclable components.
When disposing of this product, please
contact the appropriate local authorities.
Yamaha cannot be held responsible for
damage caused by improper use or
modifications to the product.
2
Manual Development Group
© 2021 Yamaha Corporation
Published 08/2021
CROD-A2
Yamaha Pro Audio global website
http://www.yamahaproaudio.com/
Yamaha Downloads
https://download.yamaha.com/
ADDRESS LIST
Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan
Importer (European Union): Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany
Importer (United Kingdom): Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, United Kingdom
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Toronto, Ontario,
M1S 3R1, Canada
Tel: +1-416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, CA 90620,
U.S.A.
Tel: +1-714-522-9011
MEXICO
Yamaha de México, S.A. de C.V.
Av. Insurgentes Sur 1647 Piso 9, Col. San José
Insurgentes, Delegación Benito Juárez, CDMX,
C.P. 03900, México
Tel: +52-55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Praça Professor José Lannes, 40, Cjs 21 e 22, Brooklin
Paulista Novo CEP 04571-100 – São Paulo – SP, Brazil
Tel: +55-11-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.,
Sucursal Argentina
Olga Cossettini 1553, Piso 4 Norte,
Madero Este-C1107CEK,
Buenos Aires, Argentina
Tel: +54-11-4119-7000
PANAMA AND OTHER LATIN
AMERICAN/CARIBBEAN REGIONS
Yamaha Music Latin America, S.A.
Edif. Torre Banco General, Piso 7, Urbanización
Marbella, Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, República de Panamá
Tel: +507-269-5311
THE UNITED KINGDOM/IRELAND
Yamaha Music Europe GmbH (UK)
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, U.K.
Tel: +44-1908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH, Branch Switzerland
in Thalwil
Seestrasse 18a, 8800 Thalwil, Switzerland
Tel: +41-44-3878080
AUSTRIA/BULGARIA/
CZECH REPUBLIC/HUNGARY/
ROMANIA/SLOVAKIA/SLOVENIA
Yamaha Music Europe GmbH
Branch Austria
Schleiergasse 20, 1100 Wien, Austria
Tel: +43-1-60203900
POLAND
Yamaha Music Europe GmbH
Sp.z o.o. Oddział w Polsce
ul. Wielicka 52, 02-657 Warszawa, Poland
Tel: +48-22-880-08-88
MALTA
Olimpus Music Ltd.
Valletta Road, Mosta MST9010, Malta
Tel: +356-2133-2093
NETHERLANDS/BELGIUM/
LUXEMBOURG
Yamaha Music Europe Branch Benelux
Clarissenhof 5b, 4133 AB Vianen, The Netherlands
Tel: +31-347-358040
FRANCE
Yamaha Music Europe
7 rue Ambroise Croizat, Zone d'activités de Pariest,
77183 Croissy-Beaubourg, France
Tel: +33-1-6461-4000
ITALY
Yamaha Music Europe GmbH, Branch Italy
Via Tinelli N.67/69 20855 Gerno di Lesmo (MB), Italy
Tel: +39-039-9065-1
SPAIN/PORTUGAL
Yamaha Music Europe GmbH Ibérica, Sucursal en
España
Ctra. de la Coruña km. 17,200, 28231
Las Rozas de Madrid, Spain
Tel: +34-91-639-88-88
GREECE
Philippos Nakas S.A. The Music House
19th klm. Leof. Lavriou 190 02 Peania – Attiki,
Greece
Tel: +30-210-6686168
SWEDEN/FINLAND/ICELAND
Yamaha Music Europe GmbH Germany filial
Scandinavia
JA Wettergrensgata 1, 400 43 Göteborg, Sweden
Tel: +46-31-89-34-00
DENMARK
Yamaha Music Denmark,
Fillial of Yamaha Music Europe GmbH, Tyskland
Generatorvej 8C, ST. TH. , 2860 Søborg, Denmark
Tel: +45-44-92-49-00
NORWAY
Yamaha Music Europe GmbH Germany -
Norwegian Branch
Grini Næringspark 1, 1332 Østerås, Norway
Tel: +47-6716-7800
CYPRUS
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0
RUSSIA
Yamaha Music (Russia) LLC.
Room 37, entrance 7, bld. 7, Kievskaya street, Moscow,
121059, Russia
Tel: +7-495-626-5005
OTHER EUROPEAN REGIONS
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500
TURKEY
Yamaha Music Europe GmbH
Merkezi Almanya Türkiye İ Şstanbul ubesi
Mor Sumbul Sokak Varyap Meridian Business 1.Blok
No:1 113-114-115
Bati Atasehir Istanbul, Turkey
Tel: +90-216-275-7960
OTHER REGIONS
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: +86-400-051-7700
INDIA
Yamaha Music India Private Limited
P-401, JMD Megapolis, Sector-48, Sohna Road,
Gurugram-122018, Haryana, India
Tel: +91-124-485-3300
INDONESIA
PT Yamaha Musik Indonesia Distributor
Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto
Kav. 4, Jakarta 12930, Indonesia
Tel: +62-21-520-2577
KOREA
Yamaha Music Korea Ltd.
11F, Prudential Tower, 298, Gangnam-daero,
Gangnam-gu, Seoul, 06253, Korea
Tel: +82-2-3467-3300
MALAYSIA
Yamaha Music (Malaysia) Sdn. Bhd.
No.8, Jalan Perbandaran, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia
Tel: +60-3-78030900
SINGAPORE
Yamaha Music (Asia) Private Limited
Block 202 Hougang Street 21, #02-00,
Singapore 530202, Singapore
Tel: +65-6740-9200
TAIWAN
Yamaha Music & Electronics Taiwan Co.,Ltd.
2F., No.1, Yuandong Rd., Banqiao Dist.,
New Taipei City 22063, Taiwan (R.O.C.)
Tel: +886-2-7741-8888
THAILAND
Siam Music Yamaha Co., Ltd.
3, 4, 15, 16th Fl., Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: +66-2215-2622
VIETNAM
Yamaha Music Vietnam Company Limited
15th Floor, Nam A Bank Tower, 201-203 Cach Mang
Thang Tam St., Ward 4, Dist.3,
Ho Chi Minh City, Vietnam
Tel: +84-8-3818-1122
OTHER ASIAN REGIONS
http://asia.yamaha.com/
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 80 Market Street, South Melbourne,
VIC 3205, Australia
Tel: +61-3-9693-5111
REGIONS AND TRUST TERRITORIES
IN PACIFIC OCEAN
http://asia.yamaha.com/
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
PA57
Dimensions
Unit: mm
Reinforcing Bracket Kit
VC8NB VC8NW VC6NB VC6NW VC4NB VC4NW
VC8NB VC8NW VC6NB VC6NW
AB-C2
C-Ring
VC4NB VC4NW
Ø325
39
117
131
Ø279
39
99
114
Ø241
Ø286
39
89
103
Ø180
Ø225
Ø285
Ø335
608
644
32
28
39
31.8
608
644
32
28
39
608
644
41
40
48
31.8
Ø247
Ø297
30
Ø186
Ø243
C-Ring C-Ring
Tile Rail Tile Rail Tile Rail
Tuotetiedot
| Merkki: | Yamaha |
| Kategoria: | Kaiutin |
| Malli: | VC4NW |
Tarvitsetko apua?
Jos tarvitset apua merkille Yamaha VC4NW esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kaiutin Yamaha Käyttöohjeet
24 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
Kaiutin Käyttöohjeet
- Kaiutin Aiwa
- Kaiutin LG
- Kaiutin Vonyx
- Kaiutin Grundig
- Kaiutin Hama
- Kaiutin Philips
- Kaiutin IKEA
- Kaiutin Edifier
- Kaiutin Kogan
- Kaiutin Soundcore
- Kaiutin Turbosound
- Kaiutin GoGEN
- Kaiutin Morel
- Kaiutin Axis
- Kaiutin Extron
- Kaiutin Media-tech
- Kaiutin EarFun
- Kaiutin Ecler
- Kaiutin Audio-Technica
- Kaiutin Toa
- Kaiutin Pyle
- Kaiutin Sencor
- Kaiutin Bose
- Kaiutin Orava
- Kaiutin JVC
- Kaiutin Kicker
- Kaiutin Auna
- Kaiutin OSD Audio
- Kaiutin MB Quart
- Kaiutin Aplic
- Kaiutin Advance
- Kaiutin Sonance
- Kaiutin AXESS
- Kaiutin Artsound
- Kaiutin Denon
- Kaiutin Yorkville
- Kaiutin V-Tac
- Kaiutin Infinity
- Kaiutin Majority
- Kaiutin Helix
- Kaiutin Klipsch
- Kaiutin Muse
- Kaiutin Ground Zero
- Kaiutin Karma
- Kaiutin Glemm
- Kaiutin Match
- Kaiutin Definitive Technology
- Kaiutin QSC
- Kaiutin Q Acoustics
- Kaiutin Monitor Audio
- Kaiutin PSB
- Kaiutin Vizio
- Kaiutin Polk
- Kaiutin ESX
- Kaiutin Omnitronic
- Kaiutin MEE Audio
- Kaiutin Monacor
- Kaiutin ModeCom
- Kaiutin Hercules
- Kaiutin Electro-Voice
- Kaiutin Wharfedale
- Kaiutin Mount-It!
- Kaiutin GMB Audio
- Kaiutin Mad Dog
- Kaiutin Memphis Audio
- Kaiutin Focal
- Kaiutin Alpine
- Kaiutin Genelec
- Kaiutin Bazooka
- Kaiutin Lamax
- Kaiutin Aiaiai
- Kaiutin RCF
- Kaiutin N-Gear
- Kaiutin Phoenix Gold
- Kaiutin Aconatic
- Kaiutin Atlas
- Kaiutin PowerBass
- Kaiutin Harman Kardon
- Kaiutin Yamazen
- Kaiutin Lexibook
- Kaiutin Ibiza Sound
Viimeisimmät Kaiutin Käyttöohjeet
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
26 Lokakuuta 2024
26 Lokakuuta 2024
26 Lokakuuta 2024
26 Lokakuuta 2024
26 Lokakuuta 2024