Aiaiai UNIT-4 Wireless+ Käyttöohje

Aiaiai Kaiutin UNIT-4 Wireless+

Lue alta 📖 käyttöohje suomeksi merkille Aiaiai UNIT-4 Wireless+ (2 sivua) kategoriassa Kaiutin. Tämä opas oli hyödyllinen 5 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
©AIAIAI
UNIT-4 WIRELESS+
Scan for Product Manual +
Mobile App Download
Connect your monitors
1. Unpack X02 (available when UNIT-4 purchased as a stereo pair)
2. Connect X02 to your device
3. Turn monitors on
Tune the sound to your environment
Set up your sound. UNIT-4 is tuned for studio use straight out of the box.
Tune the frequency response to your space using the UNIT-4 mobile app.
Quick Start Guide
If you have 2 speakers, follow these steps on both.
Regulatory Info
Manufacturer information:
Company name: AIAIAI ApS
Address:Studiestrade 31,Copenhagen K, 1455
Denmark
Battery mode Operation temperature: -20-55°C
Adaptor mode Charging temperature: 0-40°C
Operation frequency Max power)
Bluetooth: 2402-2480 MHz (4.0dBm
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This device contains licence-exempt transmitter(s)/re-
ceiv- er(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Lémetteur/récepteur exempt de licence contenu dans
le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence.
Lexploitation est autorisée aux deux conditions
suivantes : (1) L' appareil ne doit pas produire de
brouillage;
(2) L' appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d' en compromettre le fonctionnement.
Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery that can
result in an explosion.
Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas. A
battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable
liquid or gas. Do not used in high or low extreme
temperatures.
Do not used in low air pressure at high altitude
condition. UNIT-4 cannot be installed on a bracket
more than 2 meters above floor level.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian
ICES-003. (Cet appareil numérique de la Classe B
conforme à la norme NMB-003 du Canada)
FCC ID: 2AKSOUNIT-4
IC: 23880-UNIT4
AIAIAI US Agent Address
946 Yale St., #39F
Los Angeles, CA 90012
WARNING: Risk of reproductive harm from exposure
to Lead and Cadmium.
www.P65Warnings.ca.gov
Version: 2.2
Instructions UNIT-4 W+
Power on/off
Press and hold the middle button for 2 seconds.
Choose connection mode
Press the Mode button to choose between W+ Link
and Bluetooth or insert an audio cable.©
Pairing - Bluetooth© and W+ Link
Press and hold the Mode button for 2 seconds.
Bluetooth© - find AIAIAI UNIT-4 on your device
and pair.
W+ Link - put your transmitter into pairing mode
using it’s quick start guide.
Choose Left, Right or Mono
Press the Stereo/Mono button to switch between
Left (L), Right (R), or Mono (both L and R) settings.
Playback Controls
Volume up/down - Single press +/- buttons.
Mute - Single press the middle button.
Adjust EQ
Follow the QR code to the UNIT-4 product page and
instructions to set up the AIAIAI app.
Adjust LED ring brightness
Triple press the middle button to turn the LED ring
on or off.
Use the AIAIAI app to adjust the LED ring
brightness.
Charging
Check battery level - double press the middle
button.
To charge UNIT-4, connect the power supply to the
UNIT-4 charging socket, and to your mains power
socket.
Right button
Middle button
Left button
LED ring
STEREO/MONO button
MODE button
AUX 3.5mm mini-jack
DC power
BAL 6.3mm jack

Tuotetiedot

Merkki: Aiaiai
Kategoria: Kaiutin
Malli: UNIT-4 Wireless+

Tarvitsetko apua?

Jos tarvitset apua merkille Aiaiai UNIT-4 Wireless+ esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Kaiutin Aiaiai Käyttöohjeet

Kaiutin Käyttöohjeet

Viimeisimmät Kaiutin Käyttöohjeet