BlueBuilt BBMAG1M Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille BlueBuilt BBMAG1M (10 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/10
Monito
Monitorar
Bras d’Écr
Monitorha
FLYING START.
934998 - BBMA V1.0
SET UP MONITOR ARM.
EN
Feed-through mount (B)
Drill a hole in your desk and feed the clamp through it.
Clamp mount (A)
Mount your monitor arm to your desk with the clamp.
2
STEP 3B.
Feed-through mount.
Place the mounting plate
7
around the
feed-through mount. en twist it into
the stand via the hole until it’s fastened
tightly.
STEP 3A.
Clamp mount.
STEP 1A.
Clamp mount.
STEP 1B.
Feed-through mount.
STEP 2A.
Clamp mount.
STEP 2B.
Feed-through mount.
Place the clamp on the desk and tighten
the screw upwards until the stand is
fastened tightly.
Suitable for desks with a thickness
between 10 and 50mm.
Take the lid off the stand
4
. Attach the
clamp attachment
6
to the stand and
tighten the bolts
8
.
Suitable for desks with a thickness
between 45 and 80mm.
Twist the disc from the clamp
5
and then
twist and remove the clamp
attachment
6
.
Determine the thickness of your desk.
Depending on that, place the desk
clamp
5
in the upper or lower notches
and tighten the bolts
8
.
Drill a 10mm hole through your desk.
CHECKLIST.
Does the tick.
Check the VESA size of your
monitor. at way, you can
be sure it fits on the monitor
arm. e screw holes of the
VESA plate and your
monitor have to match.
Do you have a question?
Coolblue.nl/en/
customer-service
Coolblue isn’t liable for any
injury, damage, or arguments
with your partner caused by a
wrong installation.
EN
44

Tuotetiedot

Merkki: BlueBuilt
Kategoria: Ei luokiteltu
Malli: BBMAG1M

Tarvitsetko apua?

Jos tarvitset apua merkille BlueBuilt BBMAG1M esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu BlueBuilt Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet