Denon DJ SM50 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Denon DJ SM50 (32 sivua) kategoriassa Kaiutin. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/32
SM50
User Guide English ( 2 – 7 )
Guía del usuario Español ( 8 – 13 )
Guide d’utilisation Français ( 14 – 19 )
Guida per l’uso Italiano ( 20 – 25 )
Benutzerhandbuch Deutsch ( 26 – 30 )
Appendix English ( 31 )
2
User Guide ( )English
Box Contents
SM50 Studio Monitor (1) User Guide
IEC Power Cable (1) Safety & Warranty Manual
Isolation Pad (1)
Support
For complete system requirements, compatibility information, and product registration, visit the
Denon DJ website: denondj.com.
For additional product support, visit denondj.com/support.
Specifications
Frequency response 50 Hz – 20 kHz (+3 dB)
Crossover frequenc
y
2.6 kHz
Low-frequency amplifier power 50 W with 20-gauge wiring to this transducer
High-frequency amplifier power 40 W with 20-gauge wiring to this transducer
LF cutoff flat, 80 Hz, 100 Hz
MF boost In/Out of 2 dB centered at 2 kHz
HF trim +2 dB, 0 dB, -2 dB above 3 kHz
Acoustic space 0 dB, -2 dB, and -4 dB
Maximum signal-to-noise
(dynamic range) > 97 dB (typical A-weighted)
Polarit
y
Positive signal at + input produces outward LF cone displacement
Input impedance 20 k balanced, 10 k unbalanced
Input sensitivity 100 mV pink noise input produces 92 dBA output SPL at 1 meter with
volume control at maximum
Power factory-programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
Protection
RF interference, output current limiting; over-temperature; transient
on/off protection to prevent speaker "pops"; subsonic filter; external
mains fuse
Cabinet Front and rear baffle 1" MDF with 0.75" MDF wrap. Black lacquer
paint on enclosure with soft touch black paint on curved front plate.
Size (width x height x depth) 8" x 12.5" x 10.1"
191 mm x 318 mm x 257 mm
Weight (monitor + power cable) 17.2 lbs./unit
7.8 kg/unit
Above specifications subject to change without notice.
3
Connection Diagrams
Denon DJ SM50 monitors feature balanced XLR and 1/4" connectors, as well as unbalanced
RCA-type analog inputs. Connect the outputs of your audio interface, mixer, or other line-level
device to these inputs.
Note: The XLR/TRS and RCA inputs are summed (i.e., mixed together) before arriving at the
SM50 amplifier, so it is possible to have two sound sources connected to a speaker at the
same time. However, we recommend that not playing audio through both connectors
simultaneously, which may overload the inputs and result in clipping (distortion) at the inputs.
Tip: If your mixer, interface, or other audio source features both XLR/TRS and RCA-type
outputs, use the XLR or TRS connectors instead of the RCA connectors whenever possible.
XLR and TRS cables incorporate a "balanced" design that carries a signal over three
conductors ("hot," "cold," and "ground") instead of two conductors as found in RCA cables
("hot," and "ground"). This results in lower noise, higher rejection of radio-frequency (RF)
interference, and better overall fidelity. If XLR/TRS jacks are unavailable, use RCA-style cables
but try to keep the cables as short as possible.
Scenario 1
Audio Interface
(Balanced TRS
to Balanced TRS)
Scenario 2
Mixer
(Balanced XLR
to Balanced XLR)
Scenario 3
Preamplifier
(Unbalanced RCA
to Unbalanced RCA)
MI DI INVO L MI DI O UT R L R L US B
LR

Tuotetiedot

Merkki: Denon DJ
Kategoria: Kaiutin
Malli: SM50

Tarvitsetko apua?

Jos tarvitset apua merkille Denon DJ SM50 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Kaiutin Denon DJ Käyttöohjeet

Denon DJ

Denon DJ SM50 Käyttöohje

15 Joulukuuta 2024

Kaiutin Käyttöohjeet

Viimeisimmät Kaiutin Käyttöohjeet