Livex Lighting Bennington 56454-91 Käyttöohje

Livex Lighting Helpotus Bennington 56454-91

Lue alta 📖 käyttöohje suomeksi merkille Livex Lighting Bennington 56454-91 (2 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
56454
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and all
hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area.
Take care not to lose any small parts necessary for installation.
3. Thread the pipe thread part way into the center hole of the single bar and
secure with hex nut.
4. Attach the single bar to the junction box using two box screws as shown.
The side of the single bar marked “GND” must face out . The junction
box is not included.
5. While holding the lamp body(A) towards the ceiling, connect the electrical
wires as Shown in Fig.2, making sure that all wire nuts are secured. You
may have to wrap the connections with electrical tape. If your junction
box has a ground wire (green or bare copper), connect the fixture ground
wire to it. Otherwise connect fixture’s ground wire directly to the Single
bar with the green screw provided. After wires are connected, tuck them
carefully inside the Junction Box.
6. Raise lamp body (A) onto the junction box, aligning pipe thread on single
bar with center hole in lamp body and lock it securely with the column
nut(D).
7. Raise the glass(B) to the lamp holder, using secure it with check ring(C).
8. Install the light bulbs(not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
Your installation is now complete. Return power to the junction
box and test the fixture.
WHITE
HOUSE
Black
WIRES
(
Hot
)
FIXTURE
WIRES
BLACK
WIRES
FIXTURE
Bare
FIXTURE
WIRES
(Ground)
HOUSE
(
Neutral
)
WIRES
White Green or
WIRES
HOUSE
Copper(Ground)
GREEN
Thread
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us online at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20221056454
FIG.2
FIG.1

Tuotetiedot

Merkki: Livex Lighting
Kategoria: Helpotus
Malli: Bennington 56454-91

Tarvitsetko apua?

Jos tarvitset apua merkille Livex Lighting Bennington 56454-91 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Helpotus Livex Lighting Käyttöohjeet

Helpotus Käyttöohjeet

Viimeisimmät Helpotus Käyttöohjeet