Luxul AMS-2600 Käyttöohje

Luxul Kytkin AMS-2600

Lue alta 📖 käyttöohje suomeksi merkille Luxul AMS-2600 (8 sivua) kategoriassa Kytkin. Tämä opas oli hyödyllinen 11 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/8
READ ME FIRST
QUICK INSTALL GUIDE
AV Series 26-Port Gigabit
Managed Switch
AMS-2600
Includes:
AMS-2600 26-Port Gigabit Managed Switch
Rack Mount Kit
Rubber Feet
Power Cable
SETUP AND CONFIGURATION
1
Physical Installation
The AMS-2600 can be rack-mounted or used as a desktop switch. Install the
AMS-2600 in a stable/safe place to avoid any possible damage. Avoid place-
ment in direct sunlight. Do not place heavy articles on the AMS-2600 and verify
the ground connection of the outlet is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the AMS-2600, then place the switch horizontally
on a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
audio/video rack. Use four screws to attach the L-shaped brackets on both
sides of the AMS-2600 as shown below, then install the switch horizontally in
the rack. Use your desired hardware to ax the switch brackets to the rack.
Attach Feet for Desktop Installation Install Brackets for Rack-Mounting
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the AMS-2600 to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The AMS-2600 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode.
nNote: Luxul recommends at least Cat-5e unshielded twisted pair
(CAT5e UTP) cabling. To ensure best performance and stable data
transmission at 1000 Mbps, use Category-6 unshielded twisted pair
(CAT6 UTP).
Use the included power cable to connect the AMS-2600 to a surge protect-
ed outlet. The AC input socket and a power switch are on the rear panel.
The built-in power supply supports 100~240VAC at 50/60Hz.
cCAUTION: Use only the correct power cord for your environment.
Any voltage other than standard 100/240 will result in
damage to the AMS-2600.

Tuotetiedot

Merkki: Luxul
Kategoria: Kytkin
Malli: AMS-2600

Tarvitsetko apua?

Jos tarvitset apua merkille Luxul AMS-2600 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Kytkin Luxul Käyttöohjeet

Luxul

Luxul XMS-5248P Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul AMS-2624P Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul XGS-1005 Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul AGS-1008M Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul XMS-1208P Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul XMS-7048P Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul AMS-2600 Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul AGS-1016 Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul XMS-2624P Käyttöohje

14 Tammikuuta 2025
Luxul

Luxul AMS-1816P Käyttöohje

14 Tammikuuta 2025

Kytkin Käyttöohjeet

Viimeisimmät Kytkin Käyttöohjeet

Cudy

Cudy FS1024 Käyttöohje

9 Huhtikuuta 2025
Lancom

Lancom GS-2426P Käyttöohje

5 Huhtikuuta 2025
Lancom

Lancom GS-2412 Käyttöohje

4 Huhtikuuta 2025
Lancom

Lancom GS-2412P Käyttöohje

4 Huhtikuuta 2025
Lancom

Lancom GS-2426 Käyttöohje

4 Huhtikuuta 2025
Hager

Hager ARF970D Käyttöohje

3 Huhtikuuta 2025
Hager

Hager ARF920D Käyttöohje

3 Huhtikuuta 2025
Roline

Roline 14.01.3579 Käyttöohje

2 Huhtikuuta 2025