Pioneer VREC-200CH Käyttöohje

Pioneer Dashcam VREC-200CH

Lue alta 📖 käyttöohje suomeksi merkille Pioneer VREC-200CH (2 sivua) kategoriassa Dashcam. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
VREC-200CH Battery Replacement
1. Using a Phillips screwdriver, remove the screws in the screw holes
2. Use a sharp but low hardness disassembly blade and disassemble the product along the
frame gap shown in the picture above
3. In order to prevent the glass lens and screen from being damaged during the battery
removal process, remove the glass lens and screen first;
2
2
2
22
3
3
3
33
4. Find the location of the battery show in the picture above, use a constant temperature
soldering iron, and remove the battery;
5. The process of removing the battery: first remove the black wire with a constant
temperature soldering iron, then remove the red wire, and finally remove the battery.
6. The above is the entire process of battery removal. The installation steps after battery
replacement are the same as the removal steps, but the order needs to be reversed.
Contact Information
Pioneer Customer Support Center
http://www.pioneer. eu
------------------------------------------------------------
Copyright(c) 20 Pioneer Corporation 21

Tuotetiedot

Merkki: Pioneer
Kategoria: Dashcam
Malli: VREC-200CH

Tarvitsetko apua?

Jos tarvitset apua merkille Pioneer VREC-200CH esitä kysymys alla ja muut käyttäjät vastaavat sinulle