Quoizel Latitude LTT1628EK Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Quoizel Latitude LTT1628EK (2 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/2
1of2
Assembly Instruction Sheet #IS-LTT1628EK
For Style LTT1628EK
Please go to for product cleaning tips. Go to the selection.
(5) A19 Medium Base Bulbs 100W Maximum, Medium Base Vintage Bulbs are recommended, bulbs not included.
www.quoizel.com Care + Maintenance
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source:
Estimated Assembly Time:
Preparation:
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
2018 QuoizelInc. ReleasedDate:2018-03-02
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Package Contents B
A
C
Mounting Ball
x 1
Crossbar Assembly
x 1
Fixture Body
x 1
STEP 1 Unfold Support Arms-
A. Refer to the illustration, unfold support arms to proper locations.
Support Arm
STEP 2 -Install the Crossbar Assembly to Outlet Box and Adjust
the length of the Nipple
A. Attach the Crossbar Assembly (A) to the Outlet Box with the head of
the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included), tighten until snug
B. Adjust the hex nut and lock washer underside of the crossbar to the
middle of the nipple.
C. Place the Fixture Body (C) over the nipple against the ceiling to
determine the correct position of the nipple. Thread the Mounting
Ball (B) onto the nipple. Adjust the nipple to allow the Fixture Body
(C) to rest against the ceiling when held in place by the Mounting
.
Figure 1
Outlet Box Screw
(not included)
Hex Nut and
Lock Washer
Outlet Box
Green
Ground
Screw
Figure 2
Nipple
A
B
C
(Step 2 Continued)
Ball (B).
D. Remove the Mounting Ball (B) and the Fixture Body (C). Tighten
the lock washer and the hex nut against the crossbar to secure in
place.
STEP 3 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 3
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
2of2
STEP 4 Install Fixture Body-
A. Position the Fixture Body (C) over the nipple and secure with the
Mounting Ball (B). Hand tighten until snug.
Outlet Box
ANipple
C
B
Figure 4
STEP 5 Install Bulbs-
A. Insert Bulbs onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Socket
Figure 5
LTT1628EK
FINISH: EARTH BLACK
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
5” Dia.
27.5” Dia.
6.75”
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
2018 QuoizelInc. ReleasedDate:2018-03-02
Vintage Bulb
(recommended
but not included)
Tuotetiedot
| Merkki: | Quoizel |
| Kategoria: | Helpotus |
| Malli: | Latitude LTT1628EK |
Tarvitsetko apua?
Jos tarvitset apua merkille Quoizel Latitude LTT1628EK esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Helpotus Quoizel Käyttöohjeet
25 Lokakuuta 2024
Helpotus Käyttöohjeet
- Helpotus Neewer
- Helpotus IKEA
- Helpotus Kogan
- Helpotus Behringer
- Helpotus GoGEN
- Helpotus Integral LED
- Helpotus ET2
- Helpotus Crystorama
- Helpotus Aputure
- Helpotus Media-tech
- Helpotus Fluval
- Helpotus Ryobi
- Helpotus Nanlite
- Helpotus BeamZ
- Helpotus Maxim
- Helpotus Aplic
- Helpotus V-Tac
- Helpotus Elation
- Helpotus Karma
- Helpotus Weeylite
- Helpotus Aqara
- Helpotus Beghelli
- Helpotus Rosco
- Helpotus DeSisti
- Helpotus Astera
- Helpotus EXO
- Helpotus Profoto
- Helpotus GRE
- Helpotus Ikan
- Helpotus Perel
- Helpotus Blackburn
- Helpotus Rayzr 7
- Helpotus Excello
- Helpotus Genaray
- Helpotus Kanlux
- Helpotus ARRI
- Helpotus Osram
- Helpotus Elan
- Helpotus Light4Me
- Helpotus Lume Cube
- Helpotus Digipower
- Helpotus Fiilex
Viimeisimmät Helpotus Käyttöohjeet
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024