SoundTube MCA10004t Käyttöohje

SoundTube Vastaanotin MCA10004t

Lue alta 📖 käyttöohje suomeksi merkille SoundTube MCA10004t (16 sivua) kategoriassa Vastaanotin. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF
Sivu 1/16
1
Please read this user manual in detail before use.
! !
Warning Warning
SoundTube ampli ers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Do not spec or install ampli er near support beam, ventilation duct or
other structure that may interfere with ampli er function or dispersion.
913.663.5600 | www.soundtube.com
MCA7004t/ MCA10004t © 2024 SoundTube Entertainment, Inc. All rights reserved. Rev9.19.24
Please consult the MCA7004t / MCA10004t Software Manual for instructions on how to use the STNet
MCA Control PC Software. Manual can be found on the Downloads page at www.soundtube.com or on
the MCA7004t or MCA10004t product webpages.
Lead. Or fol
low.
MCA7004t MCA10004t Install Instructions For:
MCA7004t, MCA10004t
DANTE ENABLED NETWORKING AMPLIFIER INSTALLATION MANUAL
2
913.663.5600 | www.soundtube.com
MCA7004t/MCA10004t © 2024 SoundTube Entertainment, Inc. All rights reserved. Rev1.10.24
CONTENT
1. Product Description 3 ............................................................
1.1. Applicable Scenarios ...................................................3
1.2. Product Features 3 .........................................................
2. Technical Parameters 4 .........................................................
3. Panel Layout 5 .......................................................................
3.1. Front Panel 5 ..................................................................
3.2. Rear Panel 5 ..................................................................
3.3. Display Panel ...............................................................6
3.3.1 Homepage .......................................................6
3.3.2. Amplier Settings Interface 7 .............................
3.3.3. Input Settings Interface 8 ...................................
3.3.4. Output Settings Interface 9 ..................................................
3.3.5. Channel Ganging Interface ............................10
3.3.6. Preset Settings Interface ...............................10
3.3.7. Network IP Settings Interface ........................ 11
3.3.8. Details Interface .............................................12
3.3.9. Device Connection ........................................ 13
4. Device Wiring Instructions ................................................ 14
4.1 Power Cable ..............................................................14
4.2 Wiring Notes .............................................................. 14
4.3 MATRIX Mode ........................................................... 14
4.4 BRIDGE Mode ...........................................................15
5. Mounting Instructions ....................................................... 15
6. Precautions .......................................................................16
MCA7004t MCA10004t
Install Instructions For:
MCA7004t, MCA10004t
3
913.663.5600 | www.soundtube.com
MCA7004t/MCA10004t © 2024 SoundTube Entertainment, Inc. All rights reserved. Rev1.10.24
1. Product Description
The SOUNDTUBE ENTERTAINMENT MCA7004t and MCA10004t multichannel ampliers are Dante enabled and allow
for xed resistance and xed voltage output modes. At 4 ohms, these ampliers offer 700W and 1000W per channel,
respectively. The 4.3” LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, and
output mode selection. The STNet MCA Control software (included) provides the user with
complete control over the amplier. This software enables the user to monitor the real-time status of the amplier and
set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate,
parametric equalization, matrix router, delay, and more!
1.1. Applicable Scenarios
• Performing arts centers • Theatres • House of Worship
• Gymnasiums • Hotels • Sports Venues
• Convention Centers • Shopping Malls • Night Clubs
• Retail Stores • Restaurants
1.2. Product Features
1. Standard 19-inch chassis design with a height of 2U.
2. The high-efciency switching power supply, coupled with PFC, and class D digital amplier technology deliver
extremely low output distortion and high efciency.
3. The high-end DSP allows for built-in functions such as compressor, limiter, FIR processor, noise gate, parametric
equalizer, matrix router, delay, high and low pass ltering, and other DSP functions.
4. The amplier supports matrixed and bridged output modes. Matrix mode allows for four independent output
channels, while bridged mode will combine two of the four channels and allow for 100V xed voltage output or high
wattage 8 ohm and 16 ohm outputs.
5. Fixed voltage and xed resistance modes: 4Ω, 8Ω, 16Ω, 70V, 100V,
6. The front panel offers a 4.3-inch IPS display supporting capacitive touch control. Through the front panel display,
the user can monitor items such as mains voltage and current, amplier status, amplier temperature, output mode,
amplier real-time voltage, current, and power, channel volume, and speaker impedance.
7. The amplier supports TCP/IP and allows for remote connection to the amplier using the STNet MCA Control
software.
8. Adjustable Input Sensitivity Options: 2dBu/6dBu/12dBu, set through PC software or LCD screen.
9. Supported Input Sources: Analog, AES3 digital audio, and Dante network. AES3 and Dante inputs will be ducked
for an analog input on the same channel. Only channels A and C support AES3 digital audio input.
10. The amplier will automatically calculate the connected speaker’s impedance and display the impedance on the
front panel display and STNet MCA Control.
11. The amplier will enter standby when there is no input for 30 minutes. The amplier will exit standby if input is
applied, the power button is held, or the amplier is commanded through the MCA STNet Control software. The
amplier supports entering and exiting standby remotely through the MCA STNet Control software. “Wake” time
is approximately 5 seconds.
12. The amplier’s network TCP/IP function can manage multiple devices and the network interface can be cascaded.
13. The RS485 port can be utilized to support external control.
14. Wide Voltage Operation: 110-240VAC.
MCA7004t MCA10004t
Install Instructions For:
MCA7004t, MCA10004t

Tuotetiedot

Merkki: SoundTube
Kategoria: Vastaanotin
Malli: MCA10004t

Tarvitsetko apua?

Jos tarvitset apua merkille SoundTube MCA10004t esitä kysymys alla ja muut käyttäjät vastaavat sinulle


Vastaanotin SoundTube Käyttöohjeet

SoundTube

SoundTube MCA10004t Käyttöohje

31 Tammikuuta 2025
SoundTube

SoundTube MCA2004t Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube MCA7004t Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube IPD-Hub 2 DSP Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube MA501T Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube SB335 Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube SA502 Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube SA202-II Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube WLL-TR-1p-II Käyttöohje

28 Tammikuuta 2025
SoundTube

SoundTube WLL-RX1p-II Käyttöohje

28 Tammikuuta 2025

Vastaanotin Käyttöohjeet

Viimeisimmät Vastaanotin Käyttöohjeet

Yamaha

Yamaha Aventage RX-A4A Käyttöohje

9 Huhtikuuta 2025
Yamaha

Yamaha Aventage RX-A8A Käyttöohje

9 Huhtikuuta 2025
Phonocar

Phonocar PH544 Käyttöohje

5 Huhtikuuta 2025
DJI

DJI D-RTK 3 Käyttöohje

4 Huhtikuuta 2025
Harper

Harper HDT2-5010 Käyttöohje

2 Huhtikuuta 2025
Harper

Harper HDT2-2010 Käyttöohje

2 Huhtikuuta 2025
QSC

QSC SPA-Qf 60x2 Käyttöohje

1 Huhtikuuta 2025
Streacom

Streacom TL1 Käyttöohje

30 Maaliskuuta 2025
Graupner

Graupner GR-8 Käyttöohje

30 Maaliskuuta 2025
MB Quart

MB Quart FA2-2000.1 Käyttöohje

29 Maaliskuuta 2025