Thermaltake Pacific PR32-D5 Käyttöohje

Thermaltake Hardwarekoeling Pacific PR32-D5

Lue alta 📖 käyttöohje suomeksi merkille Thermaltake Pacific PR32-D5 (1 sivua) kategoriassa Hardwarekoeling. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/1
This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !
Installation Guide
Parts List
Pump & Reservoir Bracket G1/4 Stop Plug Wrench
Clip Nuts Long Screws Short Screws
Ax 1
Bx 1 C Gx 1 x 1 Hx 1
F
F
There are two types of mounting kits, please choose
the mounting kit you want to use.
Install your fittings and tubes,
remember to use the bottom as
an outlet and top as an inlet.
1 2
3 4
A
A
B
B
D
E
E
Pump+Reservoir
Pacific PR32-D5
E Fx 4 x 4Dx 4
or
D
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
After adding the recommended
coolant, remember to fill the
reservoir to only 80% and leave
the fill port cap off. This will help
stabilize your internal loop
pressure
Connect the Pump power cable to
the 4pin Molex connecter.

Tuotetiedot

Merkki: Thermaltake
Kategoria: Hardwarekoeling
Malli: Pacific PR32-D5

Tarvitsetko apua?

Jos tarvitset apua merkille Thermaltake Pacific PR32-D5 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Hardwarekoeling Thermaltake Käyttöohjeet

Hardwarekoeling Käyttöohjeet

Viimeisimmät Hardwarekoeling Käyttöohjeet