VTech VC7001 Käyttöohje
VTech
Valvontakamera
VC7001
Lue alta 📖 käyttöohje suomeksi merkille VTech VC7001 (21 sivua) kategoriassa Valvontakamera. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/21
Congratulations
on purchasing your new VTech product.
Before using this product, please read
Important safety instructions.
This manual has instructions on how to set up
and register your new sensor. For instructions
on sensor settings, see the user’s manual that
came with your ULE compatible products. Visit
www.vtechphones.com/wireless-monitoring
for a list of the latest ULE compatible products.
You may also view or download the online
User’s manual of the respective product for a
full set of installation and operation instructions
at www.vtechcanada.com.
What’s in the box
Your product package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Sensor overview
1 – Latch button
Press to open the battery compartment
case.
2 – Back cover
3 – Pair button
Red for a second when the sensor is
powered on.
Press and hold to enter the registration
mode.
4 – LED light
Flashes red when the sensor is in the
registration mode.
5 – Battery compartment case
•
•
•
•
Before use
Install batteries to the sensor
NOTES
Use 2 x AAA batteries. Alkaline batteries are
recommended. If you use other kind of batteries,
the performance of the sensor varies.
Do not mix old and new batteries. Do not mix
alkaline, standard (Carbon-Zinc) or rechargeable
(Ni-Cad, Ni-Mh, etc) batteries.
While you insert the batteries, make sure the
polarities are correct.
The batteries operate properly under the
temperature between 0°F (-18°C) and 130°F (55°C).
Press the latch button on the sensor to
open the battery compartment case.
Insert two AAA alkaline batteries into the
battery compartment.
Add and register a sensor
Your new Garage Door Sensor VC7001
can be registered to any ULE compatible
product.
Register each sensor individually to the
respective ULE compatible product before use.
Register a sensor:
Enter the registration mode by selecting
the option for adding a sensor to your ULE
compatible product. Refer to the user’s
manual of your ULE compatible product for
more detailed instructions.
Press and hold the pair button on the
Garage Door Sensor, until the LED light
flashes red, to enter the registration mode.
When the registration process is complete,
the red LED light on the sensor will remain
steady for about two seconds, and then
turn off. The registration process takes
about 90 seconds to complete.
•
•
•
•
1.
2.
1.
2.
3.
NOTE
You can also download online User’s manuals at
http://www.vtechcanada.com/.
Replacing a sensor
If you have purchased this new VC7001
accessory sensor to replace an old sensor,
follow the instructions to deregister your old
sensor.
To replace a sensor, you must deregister the
registered sensor first, and then register this
new sensor to your ULE compatible product.
Deregister a sensor or all sensors:
Refer to the online User’s manual of your
ULE compatible product at
www.vtechphones.com/support/manuals
to deregister a sensor or all sensors.
Check the sensor before use
1. Hold the sensor and tilt it to 90 degrees,
with the logo facing downward.
You will receive alerts at your ULE
compatible product. Refer to the
Installation guide or User’s manual of
your ULE compatible product for the
sensor alerts.
2. Tilt the sensor to 90 degrees to the original
upright position.
NOTE
There is a component inside this sensor to detect
orientation. It is normal to hear a rattling sound
when tilted.
•
•
•
•
Test the sensor signal strength
You can mount the Garage Door Sensor on a
garage door that raises overhead.
Before mounting the sensor, make sure you
test if the location you install the sensor is in
range from your ULE compatible product.
1. Take the sensor to the desired mounting
location on the garage door, and use
adhesive tape to hold it temporarily in place.
2. Enter the signal checking or testing mode
at your ULE compatible product to test the
sensor signal strength.
3. Open the garage door again to make sure
you receive alerts at your ULE compatible
product.
NOTES
If you do not receive an alert when you open the
garage door, move your ULE compatible product
closer to the garage or move the sensor closer to
the respective product.
Depending on surroundings and obstructing
factors, like concrete garage walls, a tall metal
storage cabinet, or an SUV, the sensor may not
transmit to the base properly.
After testing the sensor signal strength, mark
the mounting location on the door, window,
or medicine cabinet and its respective frame.
Then, remove the adhesive tape and proceed
to the mounting process.
•
•
Mount the sensor
NOTE
Make sure the mounting surface is clean.
A textured surface or any imperfections to
a smooth surface can keep the mounting tape
from making a strong bond.
TIP
You can choose to mount the sensor with the
mounting tape first, and then use screws later if
you decide to mount it at that location for long term.
Mount with tape
1. Attach the mounting tape onto the
rectangular area of the back cover, and
then stick the Garage Door Sensor onto the
garage door.
2. Firmly press the sensor for 30 seconds to
ensure full contact on the surface area.
Mount with screws
1. Press the latch button on the sensor to
open the battery compartment case.
2. Use the two holes on the back cover to mark
the desired location of the garage door.
3. Remove the back cover and drill two holes
into the garage door.
•
•
4. Align the holes on the back cover of the
sensor with the holes on the garage door.
Stick the back cover onto the door. Tighten
the screws into the holes to secure the back
cover onto the garage door.
TIP
You may also choose to attach the mounting tape
onto the back cover to strengthen the bond, if
necessary.
5. Push the battery compartment case back
to the back cover on the garage door until it
clicks into place.
•
General product care
Taking care of your sensor
Your sensor contains sophisticated electronic parts,
so it must be treated with care.
Avoid rough treatment
Place the sensor down gently. Save the original
packing materials to protect your sensor if you ever
need to ship it.
Avoid water
Your sensor can be damaged if it gets wet. Do not
use the sensor outdoors in the rain, or handle it with
wet hands. Do not install the sensor near a sink,
bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges
harmful to electronic equipment. For your own safety,
take caution when using electrical appliances during
storms.
Cleaning your sensor
Your sensor has a durable plastic casing that should
retain its luster for many years. Clean it only with a
dry non-abrasive cloth. Do not usedampened cloth or
cleaning solvents of any kind.
Storage
When you are not going to use the sensor for some
time, remove the battery from the sensor. Store the
sensor in a cool and dry place.
Go to www.vtechcanada.com
to register your product for
enhanced warranty support and
the latest VTech product news.
VC7001
Accessory Garage Door Sensor
for use with
ULE certified systems*
User’s manual
(Canada version)
User’s manual
Garage Door Sensor Double-sided
mounting tape
AAA battery x 2 Screw x 2
User’s manual
* Visit for the latest ULE compatible products.www.vtechphones.com/wireless-monitoring
NOTE
The garage images in this manual are for conceptual
reference only.
•
Frequently asked questions
Below are the questions most frequently asked about
the sensor. If you cannot find the answer
to your question, visit our website at
www.vtechcanada.com or call 1-800-267-7377 for
customer service.
The sensor
does not
work at all.
Make sure two AAA alkaline
batteries are installed.
The sensor may be deregistered
from the telephone base. Register
it back to your ULE compatible
product.
The sensor may be out of range.
Move the sensor closer to your
ULE compatible product.
Important safety instructions
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and injury, including the following:
Adult setup is required.
Do not use this product near water. For example,
do not use it next to a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in
a wet basement or shower.
Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
This product should not be placed in any area
where proper ventilation is not provided. Slots
and openings in the back or bottom of this
product are provided for ventilation. To protect
them from overheating, these openings must
not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or
heat register.
Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short
circuit. Never spill liquid of any kind on the
product.
To reduce the risk of electric shock, do not
disassemble this product, but take it to an
authorized service facility. Opening or removing
parts of the product other than specified access
doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently
used.
1.
2.
3.
4.
5.
6.
Periodically examine all components for damage.
Children should be supervised to ensure that
they do not play with the product.
The product is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
SAVE THESE INSTRUCTIONS
Battery
CAUTION: Use only the batteries indicated in
this manual. There may be a risk of explosion if a
wrong type of battery is used for the sensor unit.
Do not dispose of the battery in a fire. Check
with local waste management codes for special
disposal instructions.
Do not open or mutilate the battery. Released
electrolyte is corrosive and may cause burns or
injury to the eyes or skin. The electrolyte may be
toxic if swallowed.
Exercise care in handling batteries in order not to
create a short circuit with conductive materials.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital
cordless devices):
Wireless Technology Research, LLC (WTR), an
independent research entity, led a multidisciplinary
evaluation of the interference between portable
wireless devices and implanted cardiac pacemakers.
Supported by the U.S. Food and Drug Administration,
WTR recommends to physicians that:
Pacemaker patients
Should keep wireless devices at least six inches
from the pacemaker.
Should NOT place wireless devices directly over
the pacemaker, such as in a breast pocket, when
it is turned ON.
WTR’s evaluation did not identify any risk to
bystanders with pacemakers from other persons
using wireless devices.
FCC and IC regulations
FCC Part 15
This equipment has been tested and found to comply
with the requirements for a Class B digital device
under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are
intended to provide reasonable protection against
7.
8.
9.
•
•
•
•
•
•
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
To ensure safety of users, the FCC has established
criteria for the amount of radio frequency energy
that can be safely absorbed by a user or bystander
according to the intended usage of the product. This
product has been tested and found to comply with
the FCC criteria. The sensor unit shall be installed
and used such that parts of all persons’ body are
maintained at a distance of approximately 8 in
(20 cm) or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
Industry Canada
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
The term ‘’IC:‘’ before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
This product meets the applicable Industry Canada
technical specifications.
•
•
•
•
RF radiation exposure statement
The sensor complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. The
sensor unit should be installed and operated with
a minimum distance of 8 in (20 cm) between the
sensor and all persons’ body. This transmitter must
not be co-located or operating in conjunction with
any other antenna or transmitter. This equipment
complies also with Industry Canada RSS-102 with
respect to Canada’s Health Code 6 for Exposure of
Humans to RF Fields.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to
the holder of a valid proof of purchase (“Consumer”
or “you”) that the Product and all accessories
provided in the sales package (“Product”) are
free from defects in material and workmanship,
pursuant to the following terms and conditions,
when installed and used normally and in accordance
with the Product operating instructions. This limited
warranty extends only to the Consumer for Products
purchased and used in the United States of America
and Canada.
What will VTech do if the Product is not free from
defects in materials and workmanship during
the limited warranty period (“Materially Defective
Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair or
replace at VTech’s option, without charge, a
Materially Defective Product. If we repair the Product,
we may use new or refurbished replacement parts.
If we choose to replace the Product, we may replace
it with a new or refurbished Product of the same
or similar design. We will retain defective parts,
modules, or equipment. Repair or replacement of
the Product, at VTech’s option, is your exclusive
remedy. VTech will return the repaired or
replacement Products to you in working condition.
You should expect the repair or replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends
for ONE (1) YEAR from the date of purchase. If
VTech repairs or replaces a Materially Defective
Product under the terms of this limited warranty,
this limited warranty also applies to the repaired
or replacement Product for a period of either (a)
90 days from the date the repaired or replacement
Product is shipped to you or (b) the time remaining on
the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other
liquid intrusion; or
Product that has been damaged due to repair,
alteration or modification by anyone other than
an authorized service representative of VTech; or
Product to the extent that the problem experienced
is caused by signal conditions, network reliability,
or cable or antenna systems; or
Product to the extent that the problem is caused
by use with non-VTech accessories; or
Product whose warranty/quality stickers, product
serial number plates or electronic serial numbers
have been removed, altered or rendered
illegible; or
Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial or
institutional purposes (including but not limited to
Products used for rental purposes); or
Product returned without a valid proof of
purchase (see item 2 on the next column); or
Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service, please visit our website
at www.vtechcanada.com or call 1-800-267-7377.
NOTE: Before calling for service, please review the
user’s manual - a check of the Product’s controls and
features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery or
handling charges incurred in the transport of the
Product(s) to the service location. VTech will return
repaired or replaced Product under this limited
warranty. Transportation, delivery or handling
charges are prepaid. VTech assumes no risk for
damage or loss of the Product in transit. If the
Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of
this limited warranty, VTech will notify you and will
request that you authorize the cost of repair prior
to any further repair activity. You must pay for the
cost of repair and return shipping costs for the repair
of Products that are not covered by this limited
warranty.
1.
2.
3.
4.
5.
6.
7.
8.
What must you return with the Product to get
warranty service?
Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
Include a “valid proof of purchase” (sales receipt)
identifying the Product purchased (Product
model) and the date of purchase or receipt; and
Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications related to
this Product. VTech provides no other warranties for
this Product. The warranty exclusively describes all
of VTech’s responsibilities regarding the Product.
There are no other express warranties. No one
is authorized to make modifications to this limited
warranty and you should not rely on any such
modification.
State/Provincial Law Rights: This warranty gives you
specific legal rights, and you may also have other
rights, which vary from state to state or province to
province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability
(an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the date
of purchase. Some states/provinces do not allow
limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. In no
event shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue,
inability to use the Product or other associated
equipment, the cost of substitute equipment, and
claims by third parties) resulting from the use of this
Product. Some states/provinces do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may
not apply to you.
Please retain your original sales receipt
as proof of purchase.
1.
2.
3.
Technical specifications
Frequency
control
Crystal controlled PLL synthesizer
Transmit
frequency
1921.536-1928.448 MHz
Channels 5
Sensor
operating
temperature
0°F (-18°C) to 130°F (55°C)
Nominal
effective
range
Maximum power allowed by FCC
and IC. Actual operating range
may vary according to environment
conditions at the time of use.
Power
requirements
2 x AAA alkaline batteries
Disclaimer
This product is not designed for security purposes.
When properly installed and maintained, this product
may in some cases reduce the risk of burglary, fire,
robbery or other events occurring without providing
an alarm. VTech is not responsible for losses, injury,
or damage resulting from the use of this product.
This product is covered by U.S. Patent #8,825,043.
Other patents may be pending.
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
Copyright © 2016 for VTech Technologies Canada Ltd.
All rights reserved. 01/16. VC7001_CA_CIB_V1.0
Designed to fit your home.
And your life.
Tuotetiedot
| Merkki: | VTech |
| Kategoria: | Valvontakamera |
| Malli: | VC7001 |
Tarvitsetko apua?
Jos tarvitset apua merkille VTech VC7001 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Valvontakamera VTech Käyttöohjeet
14 Joulukuuta 2024
14 Joulukuuta 2024
Valvontakamera Käyttöohjeet
- Valvontakamera ORNO
- Valvontakamera Bosch
- Valvontakamera D-Link
- Valvontakamera Philips
- Valvontakamera TP Link
- Valvontakamera Kogan
- Valvontakamera Axis
- Valvontakamera Lorex
- Valvontakamera EMOS
- Valvontakamera Planet
- Valvontakamera Hikvision
- Valvontakamera V-Tac
- Valvontakamera CRUX
- Valvontakamera I-PRO
- Valvontakamera DVDO
- Valvontakamera Uniden
- Valvontakamera BIRDFY
- Valvontakamera MEE Audio
- Valvontakamera IOIO
- Valvontakamera Imou
- Valvontakamera BirdDog
- Valvontakamera Mobotix
- Valvontakamera Milesight
- Valvontakamera KJB Security Products
- Valvontakamera Vimar
- Valvontakamera Setti+
- Valvontakamera AVer
- Valvontakamera Foscam
- Valvontakamera Overmax
- Valvontakamera Alfatron
- Valvontakamera Burg-Wachter
- Valvontakamera ClearOne
- Valvontakamera AViPAS
- Valvontakamera Enabot
- Valvontakamera IDIS
Viimeisimmät Valvontakamera Käyttöohjeet
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024
13 Joulukuuta 2024