Wasp WLR8950 Käyttöohje
Wasp
Viivakoodin lukija
WLR8950
Lue alta 📖 käyttöohje suomeksi merkille Wasp WLR8950 (36 sivua) kategoriassa Viivakoodin lukija. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/36
WLR8950
User Manual
Table of Contents
Chapter 1. Introduction 1
Chapter 2. Barcode Symbologies 2
Chapter 3. Installation 3
Chapter 4. Quick Start 4
Chapter 5. Setup & Configuration 5
Factory Default 5
Auto-Sense Stand Mode 6
Keyboard Connection 6
Interface Selections 6
Beep Settings 7
Beep and Delay 7
Interblock Delay 8
Upper/Lower Case 9
Keyboard Language 9
Preamble/Postamble 10
Terminator 10
Label Type Positive/Negative 11
Code ID 11
Bi-color light source settings 12
Enable/Disable Barcode Symbologies 13
Code 39 Settings 14
Interleaved 2 of 5 and Code 93 settings 15
Code 128 and UCC/EAN 128 Settings 16
MSI Plessey Settings 17
Codabar Settings 18
UPC-A and UPC-A Supplement Settings 19
UPC-E and UPC-E Supplement Settings 20
EAN-8 and EAN-8 Supplement Settings 21
EAN-13 and EAN-13 Supplement Settings 22
Appendix A Barcode Test Symbols 23
Appendix B ASCII Table 25
Appendix C Function Codes for PC 29
Appendix D Technical Specifications 30
Warranty Information 31
FAQ 32
Product Support 33
Rev. 5/09/2012
Chapter 1
1
Introduction
Barcoding is the most common Automated Data Collection (ADC) technology providing timely, error-free information that can be
used to increase productivity, accuracy, and efficiency in the workplace. Virtually every type of industry is using barcodes to replace
keyboard data entry. Studies have shown that a proficient data entry operator will make one error for every 300 characters that are
manually entered. The error rate using barcodes is almost negligible and can be error-free using barcode symbologies with the check
digit enabled.
The Wasp Charged Coupled Device (CCD) technology is a technique whereby a barcode is photographed, digitized, and electronically
sampled by built-in photodetectors. The detectors process the measurement of every bar and space using the number of adjacent
photodetectors which contrast a black mark and a white space. Wasp WLR8950 series scanners are extremely rugged since they have
no moving parts. Wasp WLR8950 series scanners support PS/2 or USB keyboard interfaces and easily wedges between the computer
and keyboard. Barcode data is passed directly into the keyboard buffer as if it had been typed in by hand by a data entry operator.
Of all the hand held barcode scanning devices on the market, the CCD reader is the easiest to use and most cost effective for the
typical business user. The Wasp WLR8950 series scanners are extended distance scanners with a depth of reading of up to one foot
depending on the mil size of the barcode. To activate the scanner, the user simply points the scanning aperture towards the barcode,
pulls the trigger, and aims the red LED beam across the barcode.
Tuotetiedot
| Merkki: | Wasp |
| Kategoria: | Viivakoodin lukija |
| Malli: | WLR8950 |
Tarvitsetko apua?
Jos tarvitset apua merkille Wasp WLR8950 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Viivakoodin lukija Wasp Käyttöohjeet
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
Viivakoodin lukija Käyttöohjeet
Viimeisimmät Viivakoodin lukija Käyttöohjeet
26 Lokakuuta 2024
19 Lokakuuta 2024