Worx WX130L.9 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Worx WX130L.9 (32 sivua) kategoriassa Porakone. Tämä opas oli hyödyllinen 7 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/32
WX130L WX130L.X
20V Cordless Sub Compact Brushless Drill Driver
Perceuse-visseuse compacte à moteur sans balais et sans l 20 V
Taladro destornilladorinalámbrico subcompacto de 20V sin escobillas
P03
P14
P21
EN
F
ES
20V Cordless Sub Compact Brushless Drill Driver
EN
3
TABLE OF CONTENTS
1. PRODUCT SAFETY
2. COMPONENT LIST
3. TECHNICAL DATA
4. INTENDED USE
5. OPERATION INSTRUCTIONS
6. PROBLEM SOLUTION
7. MAINTENANCE
1.PRODUCT SAFETY
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products;
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to lter out microscopic
particles.
WARNING: This product can expose you to
chemicals including lead and Di(2-ethylhexyl)
phthalate (DEHP) which are known to the State of
California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov .
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with
your nger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
Tuotetiedot
| Merkki: | Worx |
| Kategoria: | Porakone |
| Malli: | WX130L.9 |
Tarvitsetko apua?
Jos tarvitset apua merkille Worx WX130L.9 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Porakone Worx Käyttöohjeet
25 Helmikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
24 Tammikuuta 2025
24 Tammikuuta 2025
23 Tammikuuta 2025
23 Tammikuuta 2025
23 Tammikuuta 2025
Porakone Käyttöohjeet
- Porakone MSW
- Porakone Bosch
- Porakone DeWalt
- Porakone Gamma
- Porakone Cecotec
- Porakone Rikon
- Porakone Festo
- Porakone Gude
- Porakone Ryobi
- Porakone Flex
- Porakone Hyundai
- Porakone Milwaukee
- Porakone Tryton
- Porakone Makita
- Porakone Einhell
- Porakone Metabo
- Porakone Profitech
- Porakone Vonroc
- Porakone Stanley
- Porakone Black And Decker
- Porakone Craftsman
- Porakone Skil
- Porakone Stalco
- Porakone Fieldmann
- Porakone Hikoki
- Porakone Porter-Cable
- Porakone Bavaria
- Porakone Black Decker
- Porakone Zipper
- Porakone Topcraft
- Porakone King Craft
- Porakone Global
- Porakone Herkules
- Porakone Total
- Porakone Bavaria By Einhell
- Porakone Proviel
- Porakone Toolson
- Porakone Alpha Tools
- Porakone Netter Vibration
- Porakone Goon
- Porakone Mafell
- Porakone Duro Pro
- Porakone Handwerk
- Porakone McKenzie
- Porakone Max Bahr
- Porakone Verto
- Porakone Kraftronic
Viimeisimmät Porakone Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
1 Huhtikuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
28 Maaliskuuta 2025
28 Maaliskuuta 2025