Worx WX352 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Worx WX352 (16 sivua) kategoriassa Porakone. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/16
3
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times.
This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts.
Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection
facilities, ensure these are connected and
properly used.
Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles.
A careless action can cause
severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
Tuotetiedot
| Merkki: | Worx |
| Kategoria: | Porakone |
| Malli: | WX352 |
Tarvitsetko apua?
Jos tarvitset apua merkille Worx WX352 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Porakone Worx Käyttöohjeet
25 Helmikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
25 Tammikuuta 2025
24 Tammikuuta 2025
24 Tammikuuta 2025
23 Tammikuuta 2025
23 Tammikuuta 2025
23 Tammikuuta 2025
Porakone Käyttöohjeet
- Porakone MSW
- Porakone Bosch
- Porakone DeWalt
- Porakone Gamma
- Porakone Cecotec
- Porakone Rikon
- Porakone Festo
- Porakone Gude
- Porakone Ryobi
- Porakone Flex
- Porakone Hyundai
- Porakone Milwaukee
- Porakone Tryton
- Porakone Makita
- Porakone Einhell
- Porakone Metabo
- Porakone Profitech
- Porakone Vonroc
- Porakone Stanley
- Porakone Black And Decker
- Porakone Craftsman
- Porakone Skil
- Porakone Stalco
- Porakone Fieldmann
- Porakone Hikoki
- Porakone Porter-Cable
- Porakone Bavaria
- Porakone Black Decker
- Porakone Zipper
- Porakone Topcraft
- Porakone King Craft
- Porakone Global
- Porakone Herkules
- Porakone Total
- Porakone Bavaria By Einhell
- Porakone Proviel
- Porakone Toolson
- Porakone Alpha Tools
- Porakone Netter Vibration
- Porakone Goon
- Porakone Mafell
- Porakone Duro Pro
- Porakone Handwerk
- Porakone McKenzie
- Porakone Max Bahr
- Porakone Verto
- Porakone Kraftronic
Viimeisimmät Porakone Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
1 Huhtikuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
28 Maaliskuuta 2025
28 Maaliskuuta 2025