Getac CA-NF21 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Getac CA-NF21 (4 sivua) kategoriassa Kamera. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/4
GETAC VIDEO SOLUTION
CA-NF21
IP Camera
QUICK START GUIDE
1.
Unpacking
IP Camera
Depending on your purchase, your IP camera is one of the below four models.
CA-NF21-N CA-NF21-W
(Type 1)
CA-NF21-W
(Type 2) CA-NF21-WI
Accessories
Windshield Mounting
1
Camera cable
2
Mounting arm and
hex socket cap screw
Mounting plate, pad,
and screw x 4
1
The Windshield Mounting kit is supplied with CA-NF21-N and CA-NF21-W (Type 1) only.
2
The camera cable is optional and supplied separately, not to be found in the CA-NF21
packaging box.
2.
Identifying Components
Front
CA-NF21-N CA-NF21-W CA-NF21-WI
No. Description
FHD Camera Lens
Status LED: It can be configured to light up when the system is
recording with two different intensities.
IR LED
Microphone
Light Sensor
Rear
CA-NF21-N CA-NF21-W CA-NF21-WI
No. Description
Factory Reset
Microphone
Status LED
Red: Boot up
Green: Ready
Connector
PoE Connector
3.
Notices
See Installation Diagram for more information.
FCC Regulations
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make
any unauthorized modifications.
FCC Note:
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Warning:
To assure continued FCC emission limit compliance, the user must only use shielded interface
cables when connecting to external units. Also, any unauthorized changes or modifications to
this equipment could void the user’s authority to operate this device.
Tuotetiedot
| Merkki: | Getac |
| Kategoria: | Kamera |
| Malli: | CA-NF21 |
Tarvitsetko apua?
Jos tarvitset apua merkille Getac CA-NF21 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kamera Getac Käyttöohjeet
17 Lokakuuta 2024
17 Lokakuuta 2024
17 Lokakuuta 2024
Kamera Käyttöohjeet
- Kamera Kogan
- Kamera Kodak
- Kamera Aplic
- Kamera UniView
- Kamera Minolta
- Kamera Elmo
- Kamera Linhof
- Kamera Imou
Viimeisimmät Kamera Käyttöohjeet
25 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024