Sonneman Fino Duo 3779 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Sonneman Fino Duo 3779 (3 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/3
©2023 SONNEMAN - A Way of Light
Assembly Instructions
Fino Duo
Product Information
and Warnings
3779
60" Pendant
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un électricien qualié pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove of bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.
Instructions D'Installation
Multiple U.S. and foreign patents pending.
Assembly Instructions
1. Shut o power to the outlet box (A).
2. Install the mounting plate (B) to the ceiling under outlet box (A) with included screws (C).
3. Determine the height at which the xture (D) is to be hung. Insert the steel cables (E)
through the respective holes in the canopy (H) and the cable locks (F) and adjust to the
desired length. To shorten the cable, push the cable up and it will be locked automatically.
To lengthen the cable, lift up on the cable and push up on the lock. While keeping the lock
depressed, lower the cable to the desired length. Release the lock to set.
4. Use the screwdriver to loosen the slotted set screws (G). Adjust height of cords. Tighten the
set screws to set. Reserve extra cord in the canopy (H).
5. Make appropriate electrical connections using wire nuts:
a. Connect the LED drivers (J) live wires to the
live outlet box wire.
b. Connect the LED drivers (J) neutral wires
to the neutral outlet box wire.
c. Connect the canopy's ground wire (green or
uncoated) to the ground outlet box wire. If
no ground is present in outlet box,
connect canopy's ground wire to the
mounting plate (B) using the green
screw (included).
6. Install canopy (H) to the mounting plate (B) with
canopy nuts (K) and make nal adjustments to the height.
7. Restore power to the outlet box (A).
Care Instructions:
Use a clean, dry cloth when dusting.
To protect the nish, avoid any harsh
abrasives or chemicals.
Note:
This xture is dimmable with Electronic Low Voltage
(Trailing-Edge), Incandescent (Leading-Edge), and 0-10V
type dimmers only.
G
E
F
H
K
J
A
B
D
C
If eld-cutting is required,
please follow these instructions:
1. Make a 1” slice along the length of the cord's outer jacket (Fig. 1).
CAUTION: Do not cut through the outer braided conductor.
2. Carefully strip the outer jacket of the cord and keep the outer
braided conductors intact (Fig. 1).
3. Slide the outer braided conductor back to create a bulge
and reveal the inner stranded conductor (Fig. 2).
4. Bend the cord to create an opening through the bunched-up
portion of outer braided conductor, then pull out the inner
stranded conductor (Fig. 3)
5. Twist together the outer braided conductor to form the negative
wire of the xture, then strip 5/8” o the end of the inner stranded
conductor to form the positive wire of the xture (Fig. 4).
6. Re-splice all power cords.
Appendix A
Inner Stranded Conductor
End
View
Insulation
Outer Jacket
Outer Braided Conductor
FAILURE TO FOLLOW THESE
INSTRUCTIONS WILL VOID THE WARRANTY
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Outer Braided
Conductor
Outer Jacket
Insulated Stranded
Conductor
Insulated
Stranded
Conductor
Negative Wire
(Outer Braided Conductor)
Positive Wire
(Insulated Stranded
Conductor)
Coaxial Power Cord:
Coax Splicing
©2023 SONNEMAN - A Way of Light
Assembly Instructions
Tuotetiedot
| Merkki: | Sonneman |
| Kategoria: | Helpotus |
| Malli: | Fino Duo 3779 |
Tarvitsetko apua?
Jos tarvitset apua merkille Sonneman Fino Duo 3779 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Helpotus Sonneman Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
31 Joulukuuta 2025
31 Joulukuuta 2025
15 Lokakuuta 2024
15 Lokakuuta 2024
Helpotus Käyttöohjeet
- Helpotus Stamos
- Helpotus ORNO
- Helpotus Ledlenser
- Helpotus Bosch
- Helpotus AFX
- Helpotus DeWalt
- Helpotus Hama
- Helpotus Neewer
- Helpotus Hazet
- Helpotus Philips
- Helpotus Schwaiger
- Helpotus Godox
- Helpotus IKEA
- Helpotus TP Link
- Helpotus Razer
- Helpotus Kogan
- Helpotus Behringer
- Helpotus GoGEN
- Helpotus Nitecore
- Helpotus Kichler
- Helpotus Trust
- Helpotus Integral LED
- Helpotus Lutec
- Helpotus Golden Lighting
- Helpotus ET2
- Helpotus Quoizel
- Helpotus Crystorama
- Helpotus Brennenstuhl
- Helpotus Varaluz
- Helpotus FIAP
- Helpotus Aputure
- Helpotus Media-tech
- Helpotus NEO Tools
- Helpotus Gemini
- Helpotus Westinghouse
- Helpotus Canarm
- Helpotus Klein Tools
- Helpotus Schneider
- Helpotus Dainolite
- Helpotus Tesy
- Helpotus Martin
- Helpotus EMOS
- Helpotus Sharper Image
- Helpotus Manfrotto
- Helpotus Fluval
- Helpotus Ryobi
- Helpotus Nanlite
- Helpotus BeamZ
- Helpotus Steinel
- Helpotus Maxim
- Helpotus Nordlux
- Helpotus Brandson
- Helpotus Aplic
- Helpotus CSL
- Helpotus Bearware
- Helpotus Moen
- Helpotus NUVO
- Helpotus Maginon
- Helpotus Milwaukee
- Helpotus Generac
- Helpotus OttLite
- Helpotus Kern
- Helpotus Ansmann
- Helpotus Showtec
- Helpotus Busch + Müller
- Helpotus Valerie Objects
- Helpotus V-Tac
- Helpotus Wireless Solution
- Helpotus Infinity
- Helpotus Nedis
- Helpotus Elation
- Helpotus Chauvet
- Helpotus Karma
- Helpotus TFA
- Helpotus Weeylite
- Helpotus Lumie
- Helpotus WAC Lighting
- Helpotus ESYLUX
- Helpotus Livarno Lux
- Helpotus City Theatrical
- Helpotus Omnitronic
- Helpotus Eurolite
- Helpotus Casalux
- Helpotus Innoliving
- Helpotus Aqara
- Helpotus Beghelli
- Helpotus Middle Atlantic
- Helpotus Rosco
- Helpotus DeSisti
- Helpotus American DJ
- Helpotus Astera
- Helpotus EXO
- Helpotus Novy
- Helpotus Profoto
- Helpotus Claypaky
- Helpotus GRE
- Helpotus Ikan
- Helpotus Ring
- Helpotus Perel
- Helpotus Blackburn
- Helpotus Sigma
- Helpotus Rayzr 7
- Helpotus Excello
- Helpotus Vimar
- Helpotus Genaray
- Helpotus Chrome-Q
- Helpotus Altman
- Helpotus Setti+
- Helpotus Kanlux
- Helpotus ARRI
- Helpotus Yamazen
- Helpotus Osram
- Helpotus Elan
- Helpotus Light4Me
- Helpotus GlobalTronics
- Helpotus Lume Cube
- Helpotus Digipower
- Helpotus Fiilex
- Helpotus Bresser
- Helpotus Currey & Company
- Helpotus Kino Flo
- Helpotus Cateye
- Helpotus GVM
- Helpotus Maxxmee
- Helpotus Wiesenfield
- Helpotus Sun Joe
- Helpotus Lexon
- Helpotus Rollei
- Helpotus Angler
- Helpotus Marklin
- Helpotus Raya
- Helpotus Dracast
- Helpotus ColorKey
- Helpotus Luxli
- Helpotus LUPO
- Helpotus Livex Lighting
- Helpotus Eglo
- Helpotus Hinkley Lighting
- Helpotus Underwater Kinetics
- Helpotus Ranex
- Helpotus COLBOR
- Helpotus Fuzzix
- Helpotus DMT
- Helpotus Sea&Sea
- Helpotus Lucide
- Helpotus Peerless-AV
- Helpotus LumenRadio
- Helpotus Paulmann
- Helpotus HQ Power
- Helpotus Heitronic
- Helpotus Govee
- Helpotus Melinera
- Helpotus Sagitter
- Helpotus Yongnuo
- Helpotus Qazqa
- Helpotus Audibax
- Helpotus Mazda
- Helpotus Triton Blue
- Helpotus Singercon
- Helpotus Hudson Valley
- Helpotus Forte Lighting
- Helpotus ETC
- Helpotus Portman
- Helpotus Litepanels
- Helpotus Perfect Christmans
- Helpotus XQ-Lite
- Helpotus Obsidian
- Helpotus Blizzard
- Helpotus Amaran
- Helpotus Enttec
- Helpotus Fotodiox
- Helpotus Halo
- Helpotus Light & Motion
- Helpotus AD Trend
- Helpotus Craftmade
- Helpotus Intellytech
- Helpotus Trio Lighting
- Helpotus ADB
- Helpotus DCW
- Helpotus Kinotehnik
- Helpotus GLP
- Helpotus SLV
- Helpotus Rotolight
- Helpotus Quasar Science
- Helpotus Kuzco
- Helpotus Lowel
- Helpotus Schonbek
Viimeisimmät Helpotus Käyttöohjeet
9 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
7 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025