Sonneman Turo 3442 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Sonneman Turo 3442 (3 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/3
Multiple U.S. and foreign patents pending. ©2023 SONNEMAN - A Way of Light
Assembly Instructions
Page 1
Turo
Product Information
and Warnings
3440, 3441, 3442
Short Sconce,
Medium Sconce,
Long Sconce
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un électricien qualié pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove or bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.
Mounting without a canopy
using a remote driver
1. Shut o power to the branch circuit.
2. The power supply (D) must be installed in a remote and accessible location
near the xture (E) in accordance with local electrical code (Fig. 2). Make
appropriate connections:
a. Connect the power supply's live wire to the live supply wire.
b. Connect the power supply’s neutral wire to the neutral supply wire.
c. Connect the power supply’s positive (+) output wire to the necessary
length of red wire (not included) to reach the xture location.
d. Connect the power supply's negative (-) output wire to the necessary
length of black wire (not included) to reach the xture location.
3. Loosen set screws (A) and remove the xture mounting block (B).
4. Mount the xture mounting block (B) to the wall using drywall screws and
anchors (not included), or other hardware as appropriate. The center of the
mounting block is the center of your xture location, and where the low
voltage wires will come through.
5. Drill a small hole (F) at this xture location. and pull the xture's power leads
through the center hole of the mounting block.
6. Using the included connectors, connect the xture's positive (+) conductor
to the positive (red) low voltage wire and connect the xture's negative
(-) conductor to the negative (black) low voltage wire. Carefully store the
connectors in the mounting block.
7. Fit the xture (E) over the mounting block, then tighten the set screw (A) with
included Allen key to secure the xture in place.
8. Restore power to the branch circuit.
C
Fig. 2
D
A
B
E
F
Fig. 1
Multiple U.S. and foreign patents pending. ©2023 SONNEMAN - A Way of Light
Assembly Instructions
Page 2
Care Instructions:
Use a clean, dry cloth when
dusting. To protect the nish,
avoid any harsh abrasives or
chemicals.
Note:
This xture is dimmable
with ELV (Trailing-Edge),
Incandescent (Leading-
Edge), and 0-10V type
dimmers only.
Mounting with canopy
over an outlet box
Multiple U.S. and foreign patents pending. ©2023 SONNEMAN - A Way of Light
Assembly Instructions
Page 3
Care Instructions:
Use a clean, dry cloth when
dusting. To protect the nish,
avoid any harsh abrasives or
chemicals.
Note:
This xture is dimmable
with ELV (Trailing-Edge),
Incandescent (Leading-
Edge), and 0-10V type
dimmers only.
1. Shut o power to the outlet box (C).
2. To mount with the canopy (not included), remove the set screws (A) and
xture mounting block (B).
3. Loosen the canopy set screws (D) with included Allen key and remove
the mounting plate (F) from the canopy assembly (E).
4. Assemble the Luminaire (G) and the canopy assembly (E) together with
the provided screws (H).
5. Make appropriate electrical connections using wire nuts:
a. Connect the power supply’s live wire to the live supply wire.
b. Connect the power supply’s neutral wire to the neutral supply wire.
c. Connect the xture’s ground wire (green or uncoated) to the ground
supply wire. If no ground wire is present in the outlet box, connect
ground wire to the mounting plate (F) using the green screw
(included).
d. Carefully place power supply and electrical connections in outlet box
(C).
6. Attach the mounting plate (F) to the outlet box (C) using the provided
outlet box screws (J). Pay attention to the mounting plate direction, the 2
tabs should be facing down.
7. Install the xture to the mounting plate (F) by hooking the bar in the
xture onto the upper bend on the mounting plate. Secure with set
screws (D) using included Allen key.
8. Restore power to the outlet box (A).
HA F
D
C
B
G J
E
Fig. 1
Tuotetiedot
| Merkki: | Sonneman |
| Kategoria: | Helpotus |
| Malli: | Turo 3442 |
Tarvitsetko apua?
Jos tarvitset apua merkille Sonneman Turo 3442 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Helpotus Sonneman Käyttöohjeet
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
31 Joulukuuta 2025
31 Joulukuuta 2025
15 Lokakuuta 2024
15 Lokakuuta 2024
Helpotus Käyttöohjeet
- Helpotus Stamos
- Helpotus ORNO
- Helpotus Ledlenser
- Helpotus Bosch
- Helpotus AFX
- Helpotus DeWalt
- Helpotus Hama
- Helpotus Neewer
- Helpotus Hazet
- Helpotus Philips
- Helpotus Schwaiger
- Helpotus Godox
- Helpotus IKEA
- Helpotus TP Link
- Helpotus Razer
- Helpotus Kogan
- Helpotus Behringer
- Helpotus GoGEN
- Helpotus Nitecore
- Helpotus Kichler
- Helpotus Trust
- Helpotus Integral LED
- Helpotus Lutec
- Helpotus Golden Lighting
- Helpotus ET2
- Helpotus Quoizel
- Helpotus Crystorama
- Helpotus Brennenstuhl
- Helpotus Varaluz
- Helpotus FIAP
- Helpotus Aputure
- Helpotus Media-tech
- Helpotus NEO Tools
- Helpotus Gemini
- Helpotus Westinghouse
- Helpotus Canarm
- Helpotus Klein Tools
- Helpotus Schneider
- Helpotus Dainolite
- Helpotus Tesy
- Helpotus Martin
- Helpotus EMOS
- Helpotus Sharper Image
- Helpotus Manfrotto
- Helpotus Fluval
- Helpotus Ryobi
- Helpotus Nanlite
- Helpotus BeamZ
- Helpotus Steinel
- Helpotus Maxim
- Helpotus Nordlux
- Helpotus Brandson
- Helpotus Aplic
- Helpotus CSL
- Helpotus Bearware
- Helpotus Moen
- Helpotus NUVO
- Helpotus Maginon
- Helpotus Milwaukee
- Helpotus Generac
- Helpotus OttLite
- Helpotus Kern
- Helpotus Ansmann
- Helpotus Showtec
- Helpotus Busch + Müller
- Helpotus Valerie Objects
- Helpotus V-Tac
- Helpotus Wireless Solution
- Helpotus Infinity
- Helpotus Nedis
- Helpotus Elation
- Helpotus Chauvet
- Helpotus Karma
- Helpotus TFA
- Helpotus Weeylite
- Helpotus Lumie
- Helpotus WAC Lighting
- Helpotus ESYLUX
- Helpotus Livarno Lux
- Helpotus City Theatrical
- Helpotus Omnitronic
- Helpotus Eurolite
- Helpotus Casalux
- Helpotus Innoliving
- Helpotus Aqara
- Helpotus Beghelli
- Helpotus Middle Atlantic
- Helpotus Rosco
- Helpotus DeSisti
- Helpotus American DJ
- Helpotus Astera
- Helpotus EXO
- Helpotus Novy
- Helpotus Profoto
- Helpotus Claypaky
- Helpotus GRE
- Helpotus Ikan
- Helpotus Ring
- Helpotus Perel
- Helpotus Blackburn
- Helpotus Sigma
- Helpotus Rayzr 7
- Helpotus Excello
- Helpotus Vimar
- Helpotus Genaray
- Helpotus Chrome-Q
- Helpotus Altman
- Helpotus Setti+
- Helpotus Kanlux
- Helpotus ARRI
- Helpotus Yamazen
- Helpotus Osram
- Helpotus Elan
- Helpotus Light4Me
- Helpotus GlobalTronics
- Helpotus Lume Cube
- Helpotus Digipower
- Helpotus Fiilex
- Helpotus Bresser
- Helpotus Currey & Company
- Helpotus Kino Flo
- Helpotus Cateye
- Helpotus GVM
- Helpotus Maxxmee
- Helpotus Wiesenfield
- Helpotus Sun Joe
- Helpotus Lexon
- Helpotus Rollei
- Helpotus Angler
- Helpotus Marklin
- Helpotus Raya
- Helpotus Dracast
- Helpotus ColorKey
- Helpotus Luxli
- Helpotus LUPO
- Helpotus Livex Lighting
- Helpotus Eglo
- Helpotus Hinkley Lighting
- Helpotus Underwater Kinetics
- Helpotus Ranex
- Helpotus COLBOR
- Helpotus Fuzzix
- Helpotus DMT
- Helpotus Sea&Sea
- Helpotus Lucide
- Helpotus Peerless-AV
- Helpotus LumenRadio
- Helpotus Paulmann
- Helpotus HQ Power
- Helpotus Heitronic
- Helpotus Govee
- Helpotus Melinera
- Helpotus Sagitter
- Helpotus Yongnuo
- Helpotus Qazqa
- Helpotus Audibax
- Helpotus Mazda
- Helpotus Triton Blue
- Helpotus Singercon
- Helpotus Hudson Valley
- Helpotus Forte Lighting
- Helpotus ETC
- Helpotus Portman
- Helpotus Litepanels
- Helpotus Perfect Christmans
- Helpotus XQ-Lite
- Helpotus Obsidian
- Helpotus Blizzard
- Helpotus Amaran
- Helpotus Enttec
- Helpotus Fotodiox
- Helpotus Halo
- Helpotus Light & Motion
- Helpotus AD Trend
- Helpotus Craftmade
- Helpotus Intellytech
- Helpotus Trio Lighting
- Helpotus ADB
- Helpotus DCW
- Helpotus Kinotehnik
- Helpotus GLP
- Helpotus SLV
- Helpotus Rotolight
- Helpotus Quasar Science
- Helpotus Kuzco
- Helpotus Lowel
- Helpotus Schonbek
Viimeisimmät Helpotus Käyttöohjeet
9 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
8 Huhtikuuta 2025
7 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025