IDX ZC-X2G Käyttöohje
IDX
Akun laturi
ZC-X2G
Lue alta 📖 käyttöohje suomeksi merkille IDX ZC-X2G (1 sivua) kategoriassa Akun laturi. Tämä opas oli hyödyllinen 7 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/1
Lithium Baery Charger
ZC-X2G
Ver: 1.0 USER MANUAL
IDX System Technology, Inc.
Congratulaons on your purchase of this product. Please read this user manual carefully.
This charger is designed for Li-ion packs solely.
When charging two packs, the charger will simultaneously
at 1.5A per hour charge rate. 98Wh packs will charge in
approximately 4 hours.
Rugged, sleekly styled, compact charger chassis.
Automac Universal AC input for world-wide use.
Automac detecon of damaged or misued baeries for
added safety.
Insert the AC power cord into the AC receptacle in the back of
the charger.
Connect all baeries needing charge into the charger.
Turn the rear panel power switch to the ON posion. At this
me the switch will light and the LED lights on the front panel
of the charger will blink green when charging.
If the baery does not meet quick charging condions (i.e.
temperature or deeply discharged) the charger ill precharge
the baery and go into a trickle charge mode unl it is safe to
enter quick charge mode.
The LED corresponding with the charging bay will turn solid
green when the baery is fully charged.
Warranty:
This product is warranted to the Original Purchaser against all defects in material and or workmanship
for the period herein.
The warranty period shall be 3 years for parts and labor, unless otherwise noted.
Service Center Locaons
IDX System Technology
24422 S Main St Suite #502
Carson, CA 90745
TEL: 1-310-328-2850
www.idxtek.com
• Only limited to charge specified baery(ies), it may danger if charge
other baery(ies) due to incompability problem.
• Only works in temperature between 0°C-45°C.
• Keep the terminals clean and ensure the reliable connecon.
• It is normal phenomenon that the baery charger may become warm in use.
• Please unplug the power lead if the baery charger is not used for a long me.
• Do not cover the cooling vent.
• Please do not put the baery charger in unstable place, it may fall and cause
serious damage.
• Store the baery charger in cool, dry and clean place.
• Never expose the baery charger to rain or moisture.
• Never aempt to open the baery charger, please contact the
local agent if have problems.
• Never use metal or the other conductors to touch the inside of the
baery charger.
• Never short-circuit the baery charger terminals.
• Please make sure the voltage range is fit for the baery charger.
• Please use the power adapter provided by the manufacturer in
order to avoid damage.
• Never use the baery charger if it is already damaged.
Input 100~240VA, 50/60Hz
Charging Output 3A (Max) x 1, 1.5A x 2
Adapng Output DC 15V, 6A (max)
Working Temperature 0°C~+45°C
Dimension 4.5” x 5.5” x 3”
Weight Approx. 1.0 lbs
Warning
Features
Charging
Specificaons
Cauon
Tuotetiedot
| Merkki: | IDX |
| Kategoria: | Akun laturi |
| Malli: | ZC-X2G |
Tarvitsetko apua?
Jos tarvitset apua merkille IDX ZC-X2G esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Akun laturi IDX Käyttöohjeet
11 Joulukuuta 2024
11 Joulukuuta 2024
Akun laturi Käyttöohjeet
- Akun laturi DeWalt
- Akun laturi Schwaiger
- Akun laturi IKEA
- Akun laturi APSystems
- Akun laturi Sony
- Akun laturi Nitecore
- Akun laturi Panasonic
- Akun laturi Shure
- Akun laturi Deye
- Akun laturi Ansmann
- Akun laturi Mophie
- Akun laturi Celly
- Akun laturi V7
- Akun laturi Bebob
- Akun laturi Ventev
- Akun laturi PDP
- Akun laturi Sungrow
- Akun laturi Vimar
- Akun laturi Mean Well
- Akun laturi Digipower
- Akun laturi EGO
- Akun laturi Bolt
- Akun laturi Sandberg
- Akun laturi Alogic
- Akun laturi Apa
Viimeisimmät Akun laturi Käyttöohjeet
16 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025
12 Tammikuuta 2025