Noise Engineering Numeric Repetitor Käyttöohje

Noise Engineering Ei luokiteltu Numeric Repetitor

Lue alta 📖 käyttöohje suomeksi merkille Noise Engineering Numeric Repetitor (7 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/7
Overview
Ty Rhythm Generatorpe
Size 8HP Eurorack
De .8 Inchespth
Po 2x5 Eurorackwer
+12 mA 50
-12 mA 5
Numeric Repetitor is a rhythmic gate generator based on binary arithmetic. A core
pattern forms the basis and variation is achieved by treating this pattern as a binary
number and multiplying it by another.
is module contains 32 prime rhythms derived by examining all possible rhythms
and weeding out bad ones via heuristic. ree of the outputs are variable by knob or
CV. It requires only a beat clock to run.
1
Noise Engineering
Numeric Repetitor
Dynamic Rythmic Generator
Zularic Repetitors trigger inputs trigger around 2.5v. Its CV inputs have a range of about 7v and its
outputs are around 9v.
Input & output voltages
Power
You should be good to go if you followed these instructions. Now
go make some noise!
To power your Noise Engineering module, turn off your case. Plug
one end of your ribbon cable into your power board so that the red
stripe on the ribbon cable is aligned to the side that says -12v and
each pin on the power header is plugged into the connector on the
ribbon. Make sure no pins are overhanging the connector.
Line up the red stripe on the ribbon cable so that it matches the
white stripe and/or -12v indication on the board and plug in the
connector.
Screw your module into your case BEFORE powering on the
module. You risk bumping the module’s PCB against something
metallic and damaging it if it’s not properly secured when powered
on.
A final note. Some modules have other headers -- they may have a
different number of pins or may say NOT POWER. In general,
unless a manual tells you otherwise, DO NOT CONNECT THOSE
TO POWER.
Warranty
Noise Engineering backs all our products with a product warranty: we guarantee our products to be free
from manufacturing defects (materials or workmanship) for one year from the date of the original retail
purchase (receipt or invoice required). The cost of shipping to Noise Engineering is paid by the user.
Modules requiring warranty repair will either be repaired or replaced at Noise Engineering's discretion. If
you believe you have a product that has a defect that is out of warranty, please contact us.
This warranty does not cover damage due to improper handling, storage, use, or abuse, modifications, or
improper power or other voltage application.
2
Patching Suggestions
e next step is to patch a CV. A CV sequencer or just a simple gate are both
useful for controlling either the PRIME pattern or the FACTOR offset. ese can
be used to generate a wide variety of related rhythms and dynamic variations. A
simple CV example is to take the beat clock being sent to Numeric Repetitor and
divide it by 64. Send this divided beat in to one of the FACTOR inputs. Adjust
the related FACTOR knob to control the amount of time offset that occurs to the
FACTOR.
e simplest way to get to know Numeric Repetitor is to simply patch a master
clock into BEAT and connect each of the four outputs to the gate of four
different percussion modules, envelopes or other gate triggered modules. You
can get an idea of the patterns included by adjusting the PRIME knob and a feel
for how the time offset works by playing with the FACTOR knobs.
Many more complicated schemes are possible to dynamically vary the rhythms.
Any slow control voltage or gate might produce an interesting variation!
3
Noise Engineering
Numeric Repetitor
Dynamic Rythmic Generator

Tuotetiedot

Merkki: Noise Engineering
Kategoria: Ei luokiteltu
Malli: Numeric Repetitor

Tarvitsetko apua?

Jos tarvitset apua merkille Noise Engineering Numeric Repetitor esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Noise Engineering Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet

Nec

Nec SDM-HDBT-R-UHD Käyttöohje

19 Maaliskuuta 2025
Nec

Nec SP-RM3 Käyttöohje

19 Maaliskuuta 2025
Milwaukee

Milwaukee PODS-1 Käyttöohje

19 Maaliskuuta 2025
Chord

Chord GB-50 Käyttöohje

19 Maaliskuuta 2025
Jan Nowak

Jan Nowak Eric Käyttöohje

19 Maaliskuuta 2025
Realme

Realme Buds Q2s Käyttöohje

19 Maaliskuuta 2025
Cubot

Cubot King Kong Tab Käyttöohje

19 Maaliskuuta 2025
Acefast

Acefast B9 Käyttöohje

19 Maaliskuuta 2025
Acefast

Acefast E14 Käyttöohje

19 Maaliskuuta 2025
Acefast

Acefast D16 Käyttöohje

19 Maaliskuuta 2025