Noise Engineering Sinc Defero Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Noise Engineering Sinc Defero (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
Overview
Yep, it’s an attenuator. With a fancy name! And LEDs!
1
Noise Engineering
Sinc Defero
Buffered quad attenuator with LED indication
Type
Attenuator
Size
4HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12 mA
70 mA
-12 mA
30 mA
Etymology
Sinc -- from Old English sinc: treasure and greek clastic: easily
removable
Defero -- from Latin: to slope down
“Portable treasure reduction”
Sinc Defero is rated to work with voltages from -10v to +10 v.
Input & output voltages
Patch Tutorial
2
Interface
In 1-4: CV Inputs. Inputs are circularly normaled so a single input can be sent to all
outputs or as few as you like.
Out 1-4: Buffered outputs.
Attenuators 1-4: Attenuators for each channel. Fully CCW mutes a signal. Indicator
LEDs show the incoming and outgoing signals, with green for positive voltage and
red for negative.
Design Notes
SD was one of a suite of really simple utility modules we came up with during a day
of planning. While we were really trying to work on some bigger things that we
wanted in our line---like filters and effects---we just kept having ideas that we
thought would be just so helpful if we had them with the things we were talking
about. By the end of the day, we had designs for three simple products that we’d
never discussed before and had prototypes ordered by the end of the week.
This module was meant to fill the hole we saw in the market for a buffered
attenuator. While passive attenuators abound (and we use the heck out them), the
drop in voltage they sometimes cause can be problematic, and we wanted something
that would be active and give some visual feedback. Plus, it wouldn’t be NE if it
didn’t have blinkenlights!
Patch a single CV signal into input #1. Patch the corresponding output to an input
on an oscillator, for example, the Basimilus Iteritas Alter. Turn the attenuator to turn
the CV level up and down.
Add patch cables to other outputs and send them to other inputs on BIA. The single
input is sent to all outputs.
Add a second signal to input 3. The signal on input 3 is now sent out of outputs 3
and 4.

Tuotetiedot

Merkki: Noise Engineering
Kategoria: Ei luokiteltu
Malli: Sinc Defero

Tarvitsetko apua?

Jos tarvitset apua merkille Noise Engineering Sinc Defero esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Noise Engineering Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet

Nec

Nec SDM-HDBT-R-UHD Käyttöohje

19 Maaliskuuta 2025
Nec

Nec SP-RM3 Käyttöohje

19 Maaliskuuta 2025
Milwaukee

Milwaukee PODS-1 Käyttöohje

19 Maaliskuuta 2025
Chord

Chord GB-50 Käyttöohje

19 Maaliskuuta 2025
Jan Nowak

Jan Nowak Eric Käyttöohje

19 Maaliskuuta 2025
Realme

Realme Buds Q2s Käyttöohje

19 Maaliskuuta 2025
Cubot

Cubot King Kong Tab Käyttöohje

19 Maaliskuuta 2025
Acefast

Acefast B9 Käyttöohje

19 Maaliskuuta 2025
Acefast

Acefast E14 Käyttöohje

19 Maaliskuuta 2025
Acefast

Acefast D16 Käyttöohje

19 Maaliskuuta 2025